Re: [PATCH 1/4] mfd: max77686: Add max77802 to I2C device ID table

From	Krzysztof Kozlowski <k.kozlowski@samsung.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH 1/4] mfd: max77686: Add max77802 to I2C device ID table
Date	2016-02-15 06:30 +0100
Message-ID	<r2jTr-4Xm-1@gated-at.bofh.it> (permalink)
References	<r1dGq-1XX-5@gated-at.bofh.it> <r1dGq-1XX-9@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On 12.02.2016 13:30, Javier Martinez Canillas wrote:
> The max77686 MFD driver supports both the Maxim 77686 and Maxim 77802
> PMICs but only the OF device table contains entries for both devices.
> 
> The max77802 entry is missing in the I2C device ID table which isn't
> a problem currently since the driver only supports DT but it will be
> needed if the driver is changed to be built as a module since the I2C
> core always reports a I2C modalias uevent so auto-load will not work.
> 
> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> 
>  drivers/mfd/max77686.c | 1 +
>  1 file changed, 1 insertion(+)


Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH 1/4] mfd: max77686: Add max77802 to I2C device ID table Javier Martinez Canillas <javier@osg.samsung.com> - 2016-02-12 05:40 +0100
  Re: [PATCH 1/4] mfd: max77686: Add max77802 to I2C device ID table Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2016-02-15 06:30 +0100

csiph-web