Re: [PATCH v6 10/22] usb: dwc2: host: Properly set the HFIR

From	John Youn <John.Youn@synopsys.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH v6 10/22] usb: dwc2: host: Properly set the HFIR
Date	2016-02-10 03:10 +0100
Message-ID	<r0soa-4dI-3@gated-at.bofh.it> (permalink)
References	<qW6YW-4gM-3@gated-at.bofh.it> <qW6YX-4gM-25@gated-at.bofh.it> <qWWuu-1cI-3@gated-at.bofh.it> <qX8vE-1qF-5@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On 1/31/2016 2:19 PM, Doug Anderson wrote:
> Kever,
> 
> On Sun, Jan 31, 2016 at 1:23 AM, Kever Yang <kever.yang@rock-chips.com> wrote:
>> Doug,
>>
>> On 01/29/2016 10:20 AM, Douglas Anderson wrote:
>>>
>>> According to the most up to date version of the dwc2 databook, the FRINT
>>> field of the HFIR register should be programmed to:
>>> * 125 us * (PHY clock freq for HS) - 1
>>> * 1000 us * (PHY clock freq for FS/LS) - 1
>>
>> I got 3 version of dwc_otg databook, 2.74a, 2.94a and 3.10a,
>> all the doc describe the FrInt as:
> 
> Can you check to see if you can get 3.30a (October 2015)?
> 
> 
>> * 125 us * (PHY clock freq for HS)
>> * 1000 us * (PHY clock freq for FS/LS)
>>
>> Maybe John can help to check the design.
> 
> Yes, this really needs John or someone at Synopsys.
> 
> 

The "- 1" is the correct value. The databook was corrected in 3.30a
and this applies to all previous versions of the core.

John

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

Re: [PATCH v6 10/22] usb: dwc2: host: Properly set the HFIR John Youn <John.Youn@synopsys.com> - 2016-02-10 03:10 +0100

csiph-web