Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1330848 > unrolled thread

Re: [PATCH v6 10/22] usb: dwc2: host: Properly set the HFIR

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH v6 10/22] usb: dwc2: host: Properly set the HFIR John Youn <John.Youn@synopsys.com> - 2016-02-10 03:10 +0100

#1330848 — Re: [PATCH v6 10/22] usb: dwc2: host: Properly set the HFIR

On 1/31/2016 2:19 PM, Doug Anderson wrote:
> Kever,
> 
> On Sun, Jan 31, 2016 at 1:23 AM, Kever Yang <kever.yang@rock-chips.com> wrote:
>> Doug,
>>
>> On 01/29/2016 10:20 AM, Douglas Anderson wrote:
>>>
>>> According to the most up to date version of the dwc2 databook, the FRINT
>>> field of the HFIR register should be programmed to:
>>> * 125 us * (PHY clock freq for HS) - 1
>>> * 1000 us * (PHY clock freq for FS/LS) - 1
>>
>> I got 3 version of dwc_otg databook, 2.74a, 2.94a and 3.10a,
>> all the doc describe the FrInt as:
> 
> Can you check to see if you can get 3.30a (October 2015)?
> 
> 
>> * 125 us * (PHY clock freq for HS)
>> * 1000 us * (PHY clock freq for FS/LS)
>>
>> Maybe John can help to check the design.
> 
> Yes, this really needs John or someone at Synopsys.
> 
> 

The "- 1" is the correct value. The databook was corrected in 3.30a
and this applies to all previous versions of the core.

John

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web