Re: [PATCH 1/6] dma: enable mxs-dma for imx6ul

From	Vinod Koul <vinod.koul@intel.com>
Newsgroups	linux.kernel
Subject	Re: [PATCH 1/6] dma: enable mxs-dma for imx6ul
Date	2016-01-25 13:10 +0100
Message-ID	<qUO82-3Gp-27@gated-at.bofh.it> (permalink)
References	<qT0wG-6v8-3@gated-at.bofh.it> <qT0wH-6v8-33@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On Wed, Jan 20, 2016 at 01:57:01PM +0100, Lothar Waßmann wrote:
> The mxs-dma unit is also available on i.MX6UL. Make it possible to
> select it in Kconfig.

It should be dmaengine:xxx

With that

Acked-by: Vinod Koul <vinod.koul@intel.com>

> 
> Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
> ---
>  drivers/dma/Kconfig | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
> index 79b1390..2516524 100644
> --- a/drivers/dma/Kconfig
> +++ b/drivers/dma/Kconfig
> @@ -341,12 +341,13 @@ config MV_XOR
>  
>  config MXS_DMA
>  	bool "MXS DMA support"
> -	depends on SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q
> +	depends on SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q || SOC_MX6UL
>  	select STMP_DEVICE
>  	select DMA_ENGINE
>  	help
>  	  Support the MXS DMA engine. This engine including APBH-DMA
> -	  and APBX-DMA is integrated into Freescale i.MX23/28/MX6Q/MX6DL chips.
> +	  and APBX-DMA is integrated into Freescale
> +	  i.MX23/28/MX6Q/MX6DL/MX6UL chips.
>  
>  config MX3_IPU
>  	bool "MX3x Image Processing Unit support"
> -- 
> 2.1.4
> 

-- 
~Vinod

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

[PATCH 0/6] ARM: dts: update Ka-Ro i.MX6 module support Lothar Waßmann <LW@KARO-electronics.de> - 2016-01-20 14:00 +0100
  [PATCH 6/6] ARM: dts: imx6: add support for the Ka-Ro electronics 'MB7' baseboard Lothar Waßmann <LW@KARO-electronics.de> - 2016-01-20 14:00 +0100
  [PATCH 2/6] ARM: dts: imx6: use correct mclk frequency for audio codec Lothar Waßmann <LW@KARO-electronics.de> - 2016-01-20 14:00 +0100
  [PATCH 3/6] ARM: dts: imx6qdl-tx6: add ENET_OUT clock to fec node Lothar Waßmann <LW@KARO-electronics.de> - 2016-01-20 14:00 +0100
  [PATCH 5/6] ARM: dts: imx6: add support for more Ka-Ro electronics modules Lothar Waßmann <LW@KARO-electronics.de> - 2016-01-20 14:00 +0100
  [PATCH 1/6] dma: enable mxs-dma for imx6ul Lothar Waßmann <LW@KARO-electronics.de> - 2016-01-20 14:00 +0100
    Re: [PATCH 1/6] dma: enable mxs-dma for imx6ul Vinod Koul <vinod.koul@intel.com> - 2016-01-25 13:10 +0100

csiph-web