Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1313205
| From | Lothar Waßmann <LW@KARO-electronics.de> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | [PATCH 3/6] ARM: dts: imx6qdl-tx6: add ENET_OUT clock to fec node |
| Date | 2016-01-20 14:00 +0100 |
| Message-ID | <qT0wH-6v8-17@gated-at.bofh.it> (permalink) |
| References | <qT0wG-6v8-3@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
ENET_OUT is used as reference clock for the ethernet PHY on the Ka-Ro
TX6 modules. Specify this clock in DTB to let it be managed correctly
by the driver.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
arch/arm/boot/dts/imx6qdl-tx6.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index 9404668..5e0afc8 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -227,6 +227,11 @@
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET_REF>,
+ <&clks IMX6QDL_CLK_ENET_REF>;
+ clock-names = "ipg", "ahb", "ptp", "enet_out";
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
phy-supply = <®_3v3_etn>;
--
2.1.4
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH 0/6] ARM: dts: update Ka-Ro i.MX6 module support Lothar Waßmann <LW@KARO-electronics.de> - 2016-01-20 14:00 +0100
[PATCH 6/6] ARM: dts: imx6: add support for the Ka-Ro electronics 'MB7' baseboard Lothar Waßmann <LW@KARO-electronics.de> - 2016-01-20 14:00 +0100
[PATCH 2/6] ARM: dts: imx6: use correct mclk frequency for audio codec Lothar Waßmann <LW@KARO-electronics.de> - 2016-01-20 14:00 +0100
[PATCH 3/6] ARM: dts: imx6qdl-tx6: add ENET_OUT clock to fec node Lothar Waßmann <LW@KARO-electronics.de> - 2016-01-20 14:00 +0100
[PATCH 5/6] ARM: dts: imx6: add support for more Ka-Ro electronics modules Lothar Waßmann <LW@KARO-electronics.de> - 2016-01-20 14:00 +0100
[PATCH 1/6] dma: enable mxs-dma for imx6ul Lothar Waßmann <LW@KARO-electronics.de> - 2016-01-20 14:00 +0100
Re: [PATCH 1/6] dma: enable mxs-dma for imx6ul Vinod Koul <vinod.koul@intel.com> - 2016-01-25 13:10 +0100
csiph-web