Re: JVC camera and Hauppauge PVR-150 framegrabber. Was: Re: MTI camera ...

From	Dan Ritter <dsr@randomstring.org>
Newsgroups	linux.debian.user
Subject	Re: JVC camera and Hauppauge PVR-150 framegrabber. Was: Re: MTI camera ...
Date	2017-03-23 15:40 +0100
Message-ID	<toc4a-3pL-15@gated-at.bofh.it> (permalink)
References	(2 earlier) <tjitA-5sB-1@gated-at.bofh.it> <tjrZU-3ZN-31@gated-at.bofh.it> <tjv7s-66F-25@gated-at.bofh.it> <tjGFz-5HX-1@gated-at.bofh.it> <tnZgB-2M2-1@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

On Wed, Mar 22, 2017 at 05:35:43PM -0700, peter@easthope.ca wrote:
> With a manual setting of the device path and ID, the V4L2 Test Bench 
> produced this image from the JVC camera on the microscope.  
> http://easthope.ca/JVCtoPVR150screen.jpg
> 
> Setting the device in the Test Bench each time it is opened becomes 
> tedious and no /etc/*v4l* exists.  Can the default conifiguration be 
> adjusted permanently without recompiling?  How?
> 
> Although too dark, the image from the microscope slide is faintly 
> visible. The upper half of the image is on the bottom of the screen 
> and the lower half is at the top.  On a VCR I might try adjusting 
> vertical sync.  Is there an equilent in the Test Bench?

The linux-media list at majordomo@vger.kernel.org might be your
best resource, here.

-dsr-

Back to linux.debian.user | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

MTI camera and Hauppauge PVR-150 framegrabber. peter@easthope.ca - 2017-03-09 21:50 +0100
  Re: MTI camera and Hauppauge PVR-150 framegrabber. Dan Ritter <dsr@randomstring.org> - 2017-03-10 00:20 +0100
    Re (2): MTI camera and Hauppauge PVR-150 framegrabber. peter@easthope.ca - 2017-03-10 03:30 +0100
      Re: Re (2): MTI camera and Hauppauge PVR-150 framegrabber. Dan Ritter <dsr@randomstring.org> - 2017-03-10 13:40 +0100
        Re: MTI camera and Hauppauge PVR-150 framegrabber. peter@easthope.ca - 2017-03-10 17:00 +0100
          Re: MTI camera and Hauppauge PVR-150 framegrabber. peter@easthope.ca - 2017-03-11 05:20 +0100
            JVC camera and Hauppauge PVR-150 framegrabber. Was: Re: MTI camera ... peter@easthope.ca - 2017-03-23 02:00 +0100
              Re: JVC camera and Hauppauge PVR-150 framegrabber. Was: Re: MTI  camera ... Dan Ritter <dsr@randomstring.org> - 2017-03-23 15:40 +0100

csiph-web