Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.debian.user > #179171
| From | peter@easthope.ca |
|---|---|
| Newsgroups | linux.debian.user |
| Subject | JVC camera and Hauppauge PVR-150 framegrabber. Was: Re: MTI camera ... |
| Date | 2017-03-23 02:00 +0100 |
| Message-ID | <tnZgB-2M2-1@gated-at.bofh.it> (permalink) |
| References | (1 earlier) <tjfvH-3x7-13@gated-at.bofh.it> <tjitA-5sB-1@gated-at.bofh.it> <tjrZU-3ZN-31@gated-at.bofh.it> <tjv7s-66F-25@gated-at.bofh.it> <tjGFz-5HX-1@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
With a manual setting of the device path and ID, the V4L2 Test Bench produced this image from the JVC camera on the microscope. http://easthope.ca/JVCtoPVR150screen.jpg Setting the device in the Test Bench each time it is opened becomes tedious and no /etc/*v4l* exists. Can the default conifiguration be adjusted permanently without recompiling? How? Although too dark, the image from the microscope slide is faintly visible. The upper half of the image is on the bottom of the screen and the lower half is at the top. On a VCR I might try adjusting vertical sync. Is there an equilent in the Test Bench? Thanks, ... Peter E. -- 123456789 123456789 123456789 123456789 123456789 123456789 123456789 Tel: +1 360 639 0202 Pender Is.: +1 250 629 3757 http://easthope.ca/Peter.html Bcc: peter at easthope. ca
Back to linux.debian.user | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
MTI camera and Hauppauge PVR-150 framegrabber. peter@easthope.ca - 2017-03-09 21:50 +0100
Re: MTI camera and Hauppauge PVR-150 framegrabber. Dan Ritter <dsr@randomstring.org> - 2017-03-10 00:20 +0100
Re (2): MTI camera and Hauppauge PVR-150 framegrabber. peter@easthope.ca - 2017-03-10 03:30 +0100
Re: Re (2): MTI camera and Hauppauge PVR-150 framegrabber. Dan Ritter <dsr@randomstring.org> - 2017-03-10 13:40 +0100
Re: MTI camera and Hauppauge PVR-150 framegrabber. peter@easthope.ca - 2017-03-10 17:00 +0100
Re: MTI camera and Hauppauge PVR-150 framegrabber. peter@easthope.ca - 2017-03-11 05:20 +0100
JVC camera and Hauppauge PVR-150 framegrabber. Was: Re: MTI camera ... peter@easthope.ca - 2017-03-23 02:00 +0100
Re: JVC camera and Hauppauge PVR-150 framegrabber. Was: Re: MTI camera ... Dan Ritter <dsr@randomstring.org> - 2017-03-23 15:40 +0100
csiph-web