Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > comp.arch.embedded > #10687

Re: Getting started with AVR and C

Path csiph.com!usenet.pasdenom.info!aioe.org!.POSTED!not-for-mail
From Walter Banks <walter@bytecraft.com>
Newsgroups comp.arch.embedded
Subject Re: Getting started with AVR and C
Date Wed, 05 Dec 2012 11:02:17 -0500
Organization Aioe.org NNTP Server
Lines 28
Message-ID <50BF7009.2EE9D3F1@bytecraft.com> (permalink)
References <diefb8p226eou89jtfpg1ddfflsubt9sq0@4ax.com> <76c77f99-6c09-4a37-a318-4bf75ff4fbb4@googlegroups.com> <r94ib85ed59imsvurh2ruq7sr1d0bkf82v@4ax.com> <sbdjb8drle3muhn1s2o8qdi3t4n86lt0qb@4ax.com> <bufjb8h7dfjp7galdfmv1apeqdsedijkm3@4ax.com> <srudnYJ17auSYiTNnZ2dnUVZ_t-dnZ2d@earthlink.com> <mpskb8pu8guc6detar3j0j0vajr44fobko@4ax.com> <MPG.2b244fbbe950275e989998@news.eternal-september.org> <faclb8lbieokhdni93in5a9q916h3ba8bv@4ax.com> <50BEA494.BB7C785F@bytecraft.com> <vq9tb8p68ukkf8geefabuvv5di8k78hkbg@4ax.com> <MPG.2b290da1fa6c06d798999a@news.eternal-september.org>
NNTP-Posting-Host IVgn3wFHVrjWeU4GPRJaNg.user.speranza.aioe.org
Mime-Version 1.0
Content-Type text/plain; charset=us-ascii
Content-Transfer-Encoding 7bit
X-Complaints-To abuse@aioe.org
X-Mailer Mozilla 4.79 [en]C-CCK-MCD NSCPCD479 (Windows NT 5.0; U)
X-Accept-Language en
X-Notice Filtered by postfilter v. 0.8.2
Xref csiph.com comp.arch.embedded:10687

Show key headers only | View raw


Mark Borgerson wrote:

> In article <vq9tb8p68ukkf8geefabuvv5di8k78hkbg@4ax.com>,
> jonk@infinitefactors.org says...
> >
> >
> > I think I'll just get serious about drill rods and have
> > somewhat more modest fun. I can't afford these hobbies of
> > yours!! A terrabyte done on paper tape! Cripes.
> >
> If it's the paper tape that is the key, not the method
> of storing data, perhaps a paradigm shift is in order.
>
> 1. you could lower the laser power to the point where
> you just char the paper a bit and use an optical reader.
>
> 2. Use an ink-jet print head to print the 'holes'
> and an optical sensor to read the tape.

Sounds like paperbytes all over again. At a couple K bytes
per page it would still take a lot of paper for a Tbyte.

:)

w..

Back to comp.arch.embedded | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

Getting started with AVR and C Robert Roland <fake@ddress.no> - 2012-11-24 17:41 +0100
  Re: Getting started with AVR and C hamilton <hamilton@nothere.com> - 2012-11-24 09:55 -0700
    Re: Getting started with AVR and C David Brown <david.brown@removethis.hesbynett.no> - 2012-11-25 10:39 +0100
  Re: Getting started with AVR and C Rene <a@b.c> - 2012-11-24 18:03 +0100
    Re: Getting started with AVR and C Rene <a@b.c> - 2012-12-10 13:21 +0100
      Re: Getting started with AVR and C Christopher Head <chead@is.invalid> - 2012-12-10 18:33 -0800
        Re: Getting started with AVR and C Rene <a@b.c> - 2012-12-11 12:34 +0100
  Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.please> - 2012-11-24 12:44 -0600
  Re: Getting started with AVR and C me@linnix.info-for.us - 2012-11-24 11:12 -0800
  Re: Getting started with AVR and C mike <ham789@netzero.net> - 2012-11-24 11:28 -0800
    Re: Getting started with AVR and C me@linnix.info-for.us - 2012-11-24 11:42 -0800
      Re: Getting started with AVR and C mike <ham789@netzero.net> - 2012-11-25 07:01 -0800
    Re: Getting started with AVR and C David Brown <david.brown@removethis.hesbynett.no> - 2012-11-25 20:14 +0100
  Re: Getting started with AVR and C Ivan Shmakov <oneingray@gmail.com> - 2012-11-25 03:18 +0700
  Re: Getting started with AVR and C Ivan Shmakov <oneingray@gmail.com> - 2012-11-25 04:18 +0700
    Re: Getting started with AVR and C Richard Damon <news.x.richarddamon@xoxy.net> - 2012-11-24 17:09 -0500
    Re: Getting started with AVR and C Ben Bacarisse <ben.usenet@bsb.me.uk> - 2012-11-24 22:12 +0000
      Re: Getting started with AVR and C Dave Nadler <drn@nadler.com> - 2012-11-24 21:01 -0800
        statement / expression contexts in C Ivan Shmakov <oneingray@gmail.com> - 2012-11-28 12:54 +0700
      Re: Getting started with AVR and C Ivan Shmakov <oneingray@gmail.com> - 2012-11-28 13:37 +0700
        Re: Getting started with AVR and C Ben Bacarisse <ben.usenet@bsb.me.uk> - 2012-11-28 14:49 +0000
        Re: Getting started with AVR and C Frank Miles <fpm@u.washington.edu> - 2012-11-28 17:53 +0000
          Re: Getting started with AVR and C Grant Edwards <invalid@invalid.invalid> - 2012-11-28 18:05 +0000
            Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.com> - 2012-11-28 12:56 -0600
              Re: Getting started with AVR and C glen herrmannsfeldt <gah@ugcs.caltech.edu> - 2012-11-28 21:45 +0000
                Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.com> - 2012-11-28 15:55 -0600
                Re: Getting started with AVR and C David Brown <david.brown@removethis.hesbynett.no> - 2012-11-29 01:35 +0100
                Re: Getting started with AVR and C Hans-Bernhard Bröker <HBBroeker@t-online.de> - 2012-11-29 01:47 +0100
                Re: Getting started with AVR and C David Brown <david@westcontrol.removethisbit.com> - 2012-11-29 09:24 +0100
                Re: Getting started with AVR and C Ben Bacarisse <ben.usenet@bsb.me.uk> - 2012-11-29 01:18 +0000
                Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.com> - 2012-11-28 20:07 -0600
                Re: Getting started with AVR and C Grant Edwards <invalid@invalid.invalid> - 2012-11-29 15:23 +0000
                Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-29 11:01 -0500
                Re: Getting started with AVR and C Grant Edwards <invalid@invalid.invalid> - 2012-11-29 19:19 +0000
                Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-29 14:32 -0500
                Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-11-29 11:44 -0800
                Re: Getting started with AVR and C glen herrmannsfeldt <gah@ugcs.caltech.edu> - 2012-11-29 21:23 +0000
                Re: Getting started with AVR and C Keith Thompson <kst-u@mib.org> - 2012-11-29 18:15 -0800
                Re: Getting started with AVR and C me@linnix.info-for.us - 2012-11-30 09:26 -0800
                Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-11-30 13:22 -0800
                Re: Getting started with AVR and C me@linnix.info-for.us - 2012-11-30 14:10 -0800
                Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-11-30 15:16 -0800
                Re: Getting started with AVR and C Mel Wilson <mwilson@the-wire.com> - 2012-11-30 17:36 -0500
                Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-11-30 15:18 -0800
                Re: Getting started with AVR and C upsidedown@downunder.com - 2012-12-01 10:08 +0200
                Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-01 00:45 -0800
                Re: Getting started with AVR and C Ed Beroset <beroset@mindspring.com> - 2012-12-01 08:00 -0500
                Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-01 13:22 -0800
                Re: Getting started with AVR and C Mark Borgerson <mborgerson@comcast.net> - 2012-12-01 17:33 -0800
                Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-01 17:43 -0800
                Re: Getting started with AVR and C Mark Borgerson <mborgerson@comcast.net> - 2012-12-02 14:13 -0800
                Re: Getting started with AVR and C Walter Banks <walter@bytecraft.com> - 2012-12-04 20:34 -0500
                Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-04 18:25 -0800
                Re: Getting started with AVR and C Walter Banks <walter@bytecraft.com> - 2012-12-05 07:55 -0500
                Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-05 12:11 -0800
                Re: Getting started with AVR and C Mark Borgerson <mborgerson@comcast.net> - 2012-12-05 07:52 -0800
                Re: Getting started with AVR and C Walter Banks <walter@bytecraft.com> - 2012-12-05 11:02 -0500
                Re: Getting started with AVR and C upsidedown@downunder.com - 2012-12-05 21:28 +0200
                Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-05 12:21 -0800
                Re: Getting started with AVR and C upsidedown@downunder.com - 2012-12-05 23:05 +0200
                Re: Getting started with AVR and C Tauno Voipio <tauno.voipio@notused.fi.invalid> - 2012-12-05 23:22 +0200
                Re: Getting started with AVR and C Niklas Holsti <niklas.holsti@tidorum.invalid> - 2012-12-06 00:00 +0200
                Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-05 12:17 -0800
                Re: Getting started with AVR and C upsidedown@downunder.com - 2012-12-05 23:10 +0200
                Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-05 15:25 -0800
                Re: Getting started with AVR and C upsidedown@downunder.com - 2012-12-06 07:15 +0200
                Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-05 21:52 -0800
                Re: Getting started with AVR and C Lanarcam <lanarcam1@yahoo.fr> - 2012-12-06 20:59 +0100
                Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-06 12:38 -0800
                Re: Getting started with AVR and C George Neuner <gneuner2@comcast.net> - 2012-12-06 20:39 -0500
                Re: Getting started with AVR and C Walter Banks <walter@bytecraft.com> - 2012-12-06 22:31 -0500
                Re: Getting started with AVR and C Mel Wilson <mwilson@the-wire.com> - 2012-12-05 16:32 -0500
                Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-05 15:25 -0800
                Re: Getting started with AVR and C dp <dp@tgi-sci.com> - 2012-12-05 17:04 -0800
                Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-05 22:01 -0800
                Re: Getting started with AVR and C Ian Malcolm <See.My.Sig.for.email@totally.invalid> - 2012-12-06 14:05 +0000
                Re: Getting started with AVR and C dp <dp@tgi-sci.com> - 2012-12-06 10:28 -0800
                Re: Getting started with AVR and C Mark Borgerson <mborgerson@comcast.net> - 2012-12-06 16:58 -0800
                Re: Getting started with AVR and C Mark Borgerson <mborgerson@comcast.net> - 2012-12-06 07:34 -0800
                Re: Getting started with AVR and C Walter Banks <walter@bytecraft.com> - 2012-12-06 10:55 -0500
                Re: Getting started with AVR and C Rich Webb <bbew.ar@mapson.nozirev.ten> - 2012-12-06 11:11 -0500
                Re: Getting started with AVR and C Rocky <RobertGush@gmail.com> - 2012-12-06 21:38 -0800
                Re: Getting started with AVR and C dp <dp@tgi-sci.com> - 2012-12-07 03:49 -0800
                Re: Getting started with AVR and C Robert Wessel <robertwessel2@yahoo.com> - 2012-12-01 02:58 -0600
                Re: Getting started with AVR and C upsidedown@downunder.com - 2012-12-01 17:28 +0200
                Re: Getting started with AVR and C Robert Wessel <robertwessel2@yahoo.com> - 2012-12-01 11:55 -0600
                Re: Getting started with AVR and C upsidedown@downunder.com - 2012-11-29 22:17 +0200
                Re: Getting started with AVR and C Keith Thompson <kst-u@mib.org> - 2012-11-29 12:36 -0800
                Re: Getting started with AVR and C Stephen Sprunk <stephen@sprunk.org> - 2012-11-29 16:22 -0600
                Re: Getting started with AVR and C Keith Thompson <kst-u@mib.org> - 2012-11-29 18:36 -0800
                Re: Getting started with AVR and C "Boudewijn Dijkstra" <sp4mtr4p.boudewijn@indes.com> - 2012-12-11 10:53 +0100
                Re: Getting started with AVR and C John Devereux <john@devereux.me.uk> - 2012-12-11 14:53 +0000
                Unicode Ivan Shmakov <oneingray@gmail.com> - 2012-12-14 23:25 +0700
                Re: Getting started with AVR and C Richard Damon <news.x.richarddamon@xoxy.net> - 2012-12-15 14:30 -0500
                Re: Getting started with AVR and C Keith Thompson <kst-u@mib.org> - 2012-12-15 12:24 -0800
                Re: Getting started with AVR and C Richard Damon <news.x.richarddamon@xoxy.net> - 2012-12-15 18:02 -0500
                Re: Getting started with AVR and C Keith Thompson <kst-u@mib.org> - 2012-12-15 15:45 -0800
                Re: Getting started with AVR and C Richard Damon <news.x.richarddamon@xoxy.net> - 2012-12-16 22:55 -0500
                Re: Getting started with AVR and C Keith Thompson <kst-u@mib.org> - 2012-12-16 23:20 -0800
                Re: Getting started with AVR and C Phil Carmody <thefatphil_demunged@yahoo.co.uk> - 2012-12-17 12:27 +0200
                Re: Getting started with AVR and C John Devereux <john@devereux.me.uk> - 2012-12-17 11:17 +0000
                Re: Getting started with AVR and C Ben Bacarisse <ben.usenet@bsb.me.uk> - 2012-12-17 14:07 +0000
                Re: Getting started with AVR and C Nobody <nobody@nowhere.com> - 2012-12-16 03:28 +0000
                Re: Getting started with AVR and C upsidedown@downunder.com - 2012-12-16 10:40 +0200
                Re: Getting started with AVR and C glen herrmannsfeldt <gah@ugcs.caltech.edu> - 2012-11-29 02:31 +0000
                Re: Getting started with AVR and C Ben Bacarisse <ben.usenet@bsb.me.uk> - 2012-11-29 03:36 +0000
                Re: Getting started with AVR and C glen herrmannsfeldt <gah@ugcs.caltech.edu> - 2012-11-29 03:55 +0000
                Re: Getting started with AVR and C Christopher Head <chead@is.invalid> - 2012-11-28 23:24 -0800
                Re: Getting started with AVR and C David Brown <david@westcontrol.removethisbit.com> - 2012-11-29 09:37 +0100
                Re: Getting started with AVR and C glen herrmannsfeldt <gah@ugcs.caltech.edu> - 2012-11-29 11:31 +0000
                Re: Getting started with AVR and C David Brown <david@westcontrol.removethisbit.com> - 2012-11-29 13:44 +0100
                Re: Getting started with AVR and C Hans-Bernhard Bröker <HBBroeker@t-online.de> - 2012-11-29 13:22 +0100
                Re: Getting started with AVR and C Ben Bacarisse <ben.usenet@bsb.me.uk> - 2012-11-29 13:32 +0000
                Re: Getting started with AVR and C Keith Thompson <kst-u@mib.org> - 2012-11-29 11:28 -0800
                Re: Getting started with AVR and C Ben Bacarisse <ben.usenet@bsb.me.uk> - 2012-11-29 13:20 +0000
                Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-29 09:07 -0500
                Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-29 09:17 -0500
                Re: Getting started with AVR and C pete <pfiland@mindspring.com> - 2012-11-29 18:25 -0500
                Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-29 22:46 -0500
                Re: Getting started with AVR and C lawrence.jones@siemens.com - 2012-11-30 11:47 -0500
                Re: Getting started with AVR and C Keith Thompson <kst-u@mib.org> - 2012-11-29 11:38 -0800
                Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-29 15:21 -0500
              Re: Getting started with AVR and C Grant Edwards <invalid@invalid.invalid> - 2012-11-28 22:26 +0000
                Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.com> - 2012-11-28 17:32 -0600
                Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-28 19:02 -0500
                Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.com> - 2012-11-28 18:29 -0600
                Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-28 23:39 -0500
                Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.please> - 2012-11-29 00:59 -0600
                Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-29 07:57 -0500
                Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.com> - 2012-11-29 13:02 -0600
                Re: Getting started with AVR and C Grant Edwards <invalid@invalid.invalid> - 2012-11-29 15:19 +0000
                Re: Getting started with AVR and C Phil Carmody <thefatphil_demunged@yahoo.co.uk> - 2012-11-29 12:03 +0200
                Re: Getting started with AVR and C glen herrmannsfeldt <gah@ugcs.caltech.edu> - 2012-11-29 11:39 +0000
                Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-29 08:04 -0500
                Re: Getting started with AVR and C Grant Edwards <invalid@invalid.invalid> - 2012-11-29 15:17 +0000
              Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.com> - 2012-11-28 19:19 -0600
                Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-28 23:44 -0500
          Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-28 13:15 -0500
            Re: Getting started with AVR and C Arlet Ottens <usenet+5@c-scape.nl> - 2012-11-28 19:17 +0100
              Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.com> - 2012-11-28 19:30 -0600
                Re: Getting started with AVR and C Grant Edwards <invalid@invalid.invalid> - 2012-11-29 15:29 +0000
                Re: Getting started with AVR and C John Devereux <john@devereux.me.uk> - 2012-11-29 16:36 +0000
                Re: Getting started with AVR and C upsidedown@downunder.com - 2012-11-29 22:40 +0200
                Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-11-29 13:55 -0800
                Re: Getting started with AVR and C Grant Edwards <invalid@invalid.invalid> - 2012-11-29 22:06 +0000
                Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-11-29 14:22 -0800
                Re: Getting started with AVR and C Grant Edwards <invalid@invalid.invalid> - 2012-11-29 21:59 +0000
                Re: Getting started with AVR and C John Devereux <john@devereux.me.uk> - 2012-11-30 08:29 +0000
    Re: Getting started with AVR and C Nick Keighley <nick_keighley_nospam@hotmail.com> - 2012-11-25 05:41 -0800
    Re: Getting started with AVR and C Rosario1903 <Rosario@invalid.invalid> - 2012-11-27 10:21 +0100
  Re: Getting started with AVR and C dbr@kbrx.com - 2012-11-24 21:49 +0000
    Re: Getting started with AVR and C MK <mk@nospam.co.uk> - 2012-11-25 12:24 +0000
      Re: Getting started with AVR and C Ian Malcolm <See.My.Sig.for.email@totally.invalid> - 2012-11-26 00:08 +0000

csiph-web