Path: csiph.com!usenet.pasdenom.info!aioe.org!.POSTED!not-for-mail From: Walter Banks Newsgroups: comp.arch.embedded Subject: Re: Getting started with AVR and C Date: Wed, 05 Dec 2012 11:02:17 -0500 Organization: Aioe.org NNTP Server Lines: 28 Message-ID: <50BF7009.2EE9D3F1@bytecraft.com> References: <76c77f99-6c09-4a37-a318-4bf75ff4fbb4@googlegroups.com> <50BEA494.BB7C785F@bytecraft.com> NNTP-Posting-Host: IVgn3wFHVrjWeU4GPRJaNg.user.speranza.aioe.org Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit X-Complaints-To: abuse@aioe.org X-Mailer: Mozilla 4.79 [en]C-CCK-MCD NSCPCD479 (Windows NT 5.0; U) X-Accept-Language: en X-Notice: Filtered by postfilter v. 0.8.2 Xref: csiph.com comp.arch.embedded:10687 Mark Borgerson wrote: > In article , > jonk@infinitefactors.org says... > > > > > > I think I'll just get serious about drill rods and have > > somewhat more modest fun. I can't afford these hobbies of > > yours!! A terrabyte done on paper tape! Cripes. > > > If it's the paper tape that is the key, not the method > of storing data, perhaps a paradigm shift is in order. > > 1. you could lower the laser power to the point where > you just char the paper a bit and use an optical reader. > > 2. Use an ink-jet print head to print the 'holes' > and an optical sensor to read the tape. Sounds like paperbytes all over again. At a couple K bytes per page it would still take a lot of paper for a Tbyte. :) w..