Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.arch.embedded > #10697
| From | Niklas Holsti <niklas.holsti@tidorum.invalid> |
|---|---|
| Newsgroups | comp.arch.embedded |
| Subject | Re: Getting started with AVR and C |
| Date | 2012-12-06 00:00 +0200 |
| Organization | Tidorum Ltd |
| Message-ID | <ai9ugdFg0b2U1@mid.individual.net> (permalink) |
| References | (7 earlier) <MPG.2b290da1fa6c06d798999a@news.eternal-september.org> <er6vb81nna8tefhinq9c5m39gebsqidmq2@4ax.com> <s0bvb851litclaqajl55gsnrgufcnkemrf@4ax.com> <fcdvb8lh4lrpnkvmkvd842e1ih9els17fa@4ax.com> <k9odvk$nbi$1@dont-email.me> |
On 12-12-05 23:22 , Tauno Voipio wrote:
> The ultimate tape reader was built by Danish Regnecentralen.
> It solved the question of very abrupt motion of the paper
> tape and reels needed for top speed. There were servo-controlled
> reels for input and output tape, and the feed was performed
> with a servo-controlled capstan. The whole mechanism resembled
> that of the 1/2 inch magnetic tape drives. Also, there was a
> FIFO buffer in the electronics, and its filling level was used
> to control the servos. The top speed was 2000 characters / s.
The WW II code-breaking computer Colossus read its paper tape at 5000
characters per second. They had run with up to 9700 characters per
second before the tape broke. But the Colossus tape was a fixed loop,
endlessly repeating, not a long tape on a reel. And the speed was
constant, not start-and-stop, so high speed was easier.
Ref: http://en.wikipedia.org/wiki/Colossus_computer
--
Niklas Holsti
Tidorum Ltd
niklas holsti tidorum fi
. @ .
Back to comp.arch.embedded | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
Getting started with AVR and C Robert Roland <fake@ddress.no> - 2012-11-24 17:41 +0100
Re: Getting started with AVR and C hamilton <hamilton@nothere.com> - 2012-11-24 09:55 -0700
Re: Getting started with AVR and C David Brown <david.brown@removethis.hesbynett.no> - 2012-11-25 10:39 +0100
Re: Getting started with AVR and C Rene <a@b.c> - 2012-11-24 18:03 +0100
Re: Getting started with AVR and C Rene <a@b.c> - 2012-12-10 13:21 +0100
Re: Getting started with AVR and C Christopher Head <chead@is.invalid> - 2012-12-10 18:33 -0800
Re: Getting started with AVR and C Rene <a@b.c> - 2012-12-11 12:34 +0100
Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.please> - 2012-11-24 12:44 -0600
Re: Getting started with AVR and C me@linnix.info-for.us - 2012-11-24 11:12 -0800
Re: Getting started with AVR and C mike <ham789@netzero.net> - 2012-11-24 11:28 -0800
Re: Getting started with AVR and C me@linnix.info-for.us - 2012-11-24 11:42 -0800
Re: Getting started with AVR and C mike <ham789@netzero.net> - 2012-11-25 07:01 -0800
Re: Getting started with AVR and C David Brown <david.brown@removethis.hesbynett.no> - 2012-11-25 20:14 +0100
Re: Getting started with AVR and C Ivan Shmakov <oneingray@gmail.com> - 2012-11-25 03:18 +0700
Re: Getting started with AVR and C Ivan Shmakov <oneingray@gmail.com> - 2012-11-25 04:18 +0700
Re: Getting started with AVR and C Richard Damon <news.x.richarddamon@xoxy.net> - 2012-11-24 17:09 -0500
Re: Getting started with AVR and C Ben Bacarisse <ben.usenet@bsb.me.uk> - 2012-11-24 22:12 +0000
Re: Getting started with AVR and C Dave Nadler <drn@nadler.com> - 2012-11-24 21:01 -0800
statement / expression contexts in C Ivan Shmakov <oneingray@gmail.com> - 2012-11-28 12:54 +0700
Re: Getting started with AVR and C Ivan Shmakov <oneingray@gmail.com> - 2012-11-28 13:37 +0700
Re: Getting started with AVR and C Ben Bacarisse <ben.usenet@bsb.me.uk> - 2012-11-28 14:49 +0000
Re: Getting started with AVR and C Frank Miles <fpm@u.washington.edu> - 2012-11-28 17:53 +0000
Re: Getting started with AVR and C Grant Edwards <invalid@invalid.invalid> - 2012-11-28 18:05 +0000
Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.com> - 2012-11-28 12:56 -0600
Re: Getting started with AVR and C glen herrmannsfeldt <gah@ugcs.caltech.edu> - 2012-11-28 21:45 +0000
Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.com> - 2012-11-28 15:55 -0600
Re: Getting started with AVR and C David Brown <david.brown@removethis.hesbynett.no> - 2012-11-29 01:35 +0100
Re: Getting started with AVR and C Hans-Bernhard Bröker <HBBroeker@t-online.de> - 2012-11-29 01:47 +0100
Re: Getting started with AVR and C David Brown <david@westcontrol.removethisbit.com> - 2012-11-29 09:24 +0100
Re: Getting started with AVR and C Ben Bacarisse <ben.usenet@bsb.me.uk> - 2012-11-29 01:18 +0000
Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.com> - 2012-11-28 20:07 -0600
Re: Getting started with AVR and C Grant Edwards <invalid@invalid.invalid> - 2012-11-29 15:23 +0000
Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-29 11:01 -0500
Re: Getting started with AVR and C Grant Edwards <invalid@invalid.invalid> - 2012-11-29 19:19 +0000
Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-29 14:32 -0500
Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-11-29 11:44 -0800
Re: Getting started with AVR and C glen herrmannsfeldt <gah@ugcs.caltech.edu> - 2012-11-29 21:23 +0000
Re: Getting started with AVR and C Keith Thompson <kst-u@mib.org> - 2012-11-29 18:15 -0800
Re: Getting started with AVR and C me@linnix.info-for.us - 2012-11-30 09:26 -0800
Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-11-30 13:22 -0800
Re: Getting started with AVR and C me@linnix.info-for.us - 2012-11-30 14:10 -0800
Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-11-30 15:16 -0800
Re: Getting started with AVR and C Mel Wilson <mwilson@the-wire.com> - 2012-11-30 17:36 -0500
Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-11-30 15:18 -0800
Re: Getting started with AVR and C upsidedown@downunder.com - 2012-12-01 10:08 +0200
Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-01 00:45 -0800
Re: Getting started with AVR and C Ed Beroset <beroset@mindspring.com> - 2012-12-01 08:00 -0500
Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-01 13:22 -0800
Re: Getting started with AVR and C Mark Borgerson <mborgerson@comcast.net> - 2012-12-01 17:33 -0800
Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-01 17:43 -0800
Re: Getting started with AVR and C Mark Borgerson <mborgerson@comcast.net> - 2012-12-02 14:13 -0800
Re: Getting started with AVR and C Walter Banks <walter@bytecraft.com> - 2012-12-04 20:34 -0500
Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-04 18:25 -0800
Re: Getting started with AVR and C Walter Banks <walter@bytecraft.com> - 2012-12-05 07:55 -0500
Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-05 12:11 -0800
Re: Getting started with AVR and C Mark Borgerson <mborgerson@comcast.net> - 2012-12-05 07:52 -0800
Re: Getting started with AVR and C Walter Banks <walter@bytecraft.com> - 2012-12-05 11:02 -0500
Re: Getting started with AVR and C upsidedown@downunder.com - 2012-12-05 21:28 +0200
Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-05 12:21 -0800
Re: Getting started with AVR and C upsidedown@downunder.com - 2012-12-05 23:05 +0200
Re: Getting started with AVR and C Tauno Voipio <tauno.voipio@notused.fi.invalid> - 2012-12-05 23:22 +0200
Re: Getting started with AVR and C Niklas Holsti <niklas.holsti@tidorum.invalid> - 2012-12-06 00:00 +0200
Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-05 12:17 -0800
Re: Getting started with AVR and C upsidedown@downunder.com - 2012-12-05 23:10 +0200
Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-05 15:25 -0800
Re: Getting started with AVR and C upsidedown@downunder.com - 2012-12-06 07:15 +0200
Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-05 21:52 -0800
Re: Getting started with AVR and C Lanarcam <lanarcam1@yahoo.fr> - 2012-12-06 20:59 +0100
Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-06 12:38 -0800
Re: Getting started with AVR and C George Neuner <gneuner2@comcast.net> - 2012-12-06 20:39 -0500
Re: Getting started with AVR and C Walter Banks <walter@bytecraft.com> - 2012-12-06 22:31 -0500
Re: Getting started with AVR and C Mel Wilson <mwilson@the-wire.com> - 2012-12-05 16:32 -0500
Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-05 15:25 -0800
Re: Getting started with AVR and C dp <dp@tgi-sci.com> - 2012-12-05 17:04 -0800
Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-12-05 22:01 -0800
Re: Getting started with AVR and C Ian Malcolm <See.My.Sig.for.email@totally.invalid> - 2012-12-06 14:05 +0000
Re: Getting started with AVR and C dp <dp@tgi-sci.com> - 2012-12-06 10:28 -0800
Re: Getting started with AVR and C Mark Borgerson <mborgerson@comcast.net> - 2012-12-06 16:58 -0800
Re: Getting started with AVR and C Mark Borgerson <mborgerson@comcast.net> - 2012-12-06 07:34 -0800
Re: Getting started with AVR and C Walter Banks <walter@bytecraft.com> - 2012-12-06 10:55 -0500
Re: Getting started with AVR and C Rich Webb <bbew.ar@mapson.nozirev.ten> - 2012-12-06 11:11 -0500
Re: Getting started with AVR and C Rocky <RobertGush@gmail.com> - 2012-12-06 21:38 -0800
Re: Getting started with AVR and C dp <dp@tgi-sci.com> - 2012-12-07 03:49 -0800
Re: Getting started with AVR and C Robert Wessel <robertwessel2@yahoo.com> - 2012-12-01 02:58 -0600
Re: Getting started with AVR and C upsidedown@downunder.com - 2012-12-01 17:28 +0200
Re: Getting started with AVR and C Robert Wessel <robertwessel2@yahoo.com> - 2012-12-01 11:55 -0600
Re: Getting started with AVR and C upsidedown@downunder.com - 2012-11-29 22:17 +0200
Re: Getting started with AVR and C Keith Thompson <kst-u@mib.org> - 2012-11-29 12:36 -0800
Re: Getting started with AVR and C Stephen Sprunk <stephen@sprunk.org> - 2012-11-29 16:22 -0600
Re: Getting started with AVR and C Keith Thompson <kst-u@mib.org> - 2012-11-29 18:36 -0800
Re: Getting started with AVR and C "Boudewijn Dijkstra" <sp4mtr4p.boudewijn@indes.com> - 2012-12-11 10:53 +0100
Re: Getting started with AVR and C John Devereux <john@devereux.me.uk> - 2012-12-11 14:53 +0000
Unicode Ivan Shmakov <oneingray@gmail.com> - 2012-12-14 23:25 +0700
Re: Getting started with AVR and C Richard Damon <news.x.richarddamon@xoxy.net> - 2012-12-15 14:30 -0500
Re: Getting started with AVR and C Keith Thompson <kst-u@mib.org> - 2012-12-15 12:24 -0800
Re: Getting started with AVR and C Richard Damon <news.x.richarddamon@xoxy.net> - 2012-12-15 18:02 -0500
Re: Getting started with AVR and C Keith Thompson <kst-u@mib.org> - 2012-12-15 15:45 -0800
Re: Getting started with AVR and C Richard Damon <news.x.richarddamon@xoxy.net> - 2012-12-16 22:55 -0500
Re: Getting started with AVR and C Keith Thompson <kst-u@mib.org> - 2012-12-16 23:20 -0800
Re: Getting started with AVR and C Phil Carmody <thefatphil_demunged@yahoo.co.uk> - 2012-12-17 12:27 +0200
Re: Getting started with AVR and C John Devereux <john@devereux.me.uk> - 2012-12-17 11:17 +0000
Re: Getting started with AVR and C Ben Bacarisse <ben.usenet@bsb.me.uk> - 2012-12-17 14:07 +0000
Re: Getting started with AVR and C Nobody <nobody@nowhere.com> - 2012-12-16 03:28 +0000
Re: Getting started with AVR and C upsidedown@downunder.com - 2012-12-16 10:40 +0200
Re: Getting started with AVR and C glen herrmannsfeldt <gah@ugcs.caltech.edu> - 2012-11-29 02:31 +0000
Re: Getting started with AVR and C Ben Bacarisse <ben.usenet@bsb.me.uk> - 2012-11-29 03:36 +0000
Re: Getting started with AVR and C glen herrmannsfeldt <gah@ugcs.caltech.edu> - 2012-11-29 03:55 +0000
Re: Getting started with AVR and C Christopher Head <chead@is.invalid> - 2012-11-28 23:24 -0800
Re: Getting started with AVR and C David Brown <david@westcontrol.removethisbit.com> - 2012-11-29 09:37 +0100
Re: Getting started with AVR and C glen herrmannsfeldt <gah@ugcs.caltech.edu> - 2012-11-29 11:31 +0000
Re: Getting started with AVR and C David Brown <david@westcontrol.removethisbit.com> - 2012-11-29 13:44 +0100
Re: Getting started with AVR and C Hans-Bernhard Bröker <HBBroeker@t-online.de> - 2012-11-29 13:22 +0100
Re: Getting started with AVR and C Ben Bacarisse <ben.usenet@bsb.me.uk> - 2012-11-29 13:32 +0000
Re: Getting started with AVR and C Keith Thompson <kst-u@mib.org> - 2012-11-29 11:28 -0800
Re: Getting started with AVR and C Ben Bacarisse <ben.usenet@bsb.me.uk> - 2012-11-29 13:20 +0000
Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-29 09:07 -0500
Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-29 09:17 -0500
Re: Getting started with AVR and C pete <pfiland@mindspring.com> - 2012-11-29 18:25 -0500
Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-29 22:46 -0500
Re: Getting started with AVR and C lawrence.jones@siemens.com - 2012-11-30 11:47 -0500
Re: Getting started with AVR and C Keith Thompson <kst-u@mib.org> - 2012-11-29 11:38 -0800
Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-29 15:21 -0500
Re: Getting started with AVR and C Grant Edwards <invalid@invalid.invalid> - 2012-11-28 22:26 +0000
Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.com> - 2012-11-28 17:32 -0600
Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-28 19:02 -0500
Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.com> - 2012-11-28 18:29 -0600
Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-28 23:39 -0500
Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.please> - 2012-11-29 00:59 -0600
Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-29 07:57 -0500
Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.com> - 2012-11-29 13:02 -0600
Re: Getting started with AVR and C Grant Edwards <invalid@invalid.invalid> - 2012-11-29 15:19 +0000
Re: Getting started with AVR and C Phil Carmody <thefatphil_demunged@yahoo.co.uk> - 2012-11-29 12:03 +0200
Re: Getting started with AVR and C glen herrmannsfeldt <gah@ugcs.caltech.edu> - 2012-11-29 11:39 +0000
Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-29 08:04 -0500
Re: Getting started with AVR and C Grant Edwards <invalid@invalid.invalid> - 2012-11-29 15:17 +0000
Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.com> - 2012-11-28 19:19 -0600
Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-28 23:44 -0500
Re: Getting started with AVR and C James Kuyper <jameskuyper@verizon.net> - 2012-11-28 13:15 -0500
Re: Getting started with AVR and C Arlet Ottens <usenet+5@c-scape.nl> - 2012-11-28 19:17 +0100
Re: Getting started with AVR and C Tim Wescott <tim@seemywebsite.com> - 2012-11-28 19:30 -0600
Re: Getting started with AVR and C Grant Edwards <invalid@invalid.invalid> - 2012-11-29 15:29 +0000
Re: Getting started with AVR and C John Devereux <john@devereux.me.uk> - 2012-11-29 16:36 +0000
Re: Getting started with AVR and C upsidedown@downunder.com - 2012-11-29 22:40 +0200
Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-11-29 13:55 -0800
Re: Getting started with AVR and C Grant Edwards <invalid@invalid.invalid> - 2012-11-29 22:06 +0000
Re: Getting started with AVR and C Jon Kirwan <jonk@infinitefactors.org> - 2012-11-29 14:22 -0800
Re: Getting started with AVR and C Grant Edwards <invalid@invalid.invalid> - 2012-11-29 21:59 +0000
Re: Getting started with AVR and C John Devereux <john@devereux.me.uk> - 2012-11-30 08:29 +0000
Re: Getting started with AVR and C Nick Keighley <nick_keighley_nospam@hotmail.com> - 2012-11-25 05:41 -0800
Re: Getting started with AVR and C Rosario1903 <Rosario@invalid.invalid> - 2012-11-27 10:21 +0100
Re: Getting started with AVR and C dbr@kbrx.com - 2012-11-24 21:49 +0000
Re: Getting started with AVR and C MK <mk@nospam.co.uk> - 2012-11-25 12:24 +0000
Re: Getting started with AVR and C Ian Malcolm <See.My.Sig.for.email@totally.invalid> - 2012-11-26 00:08 +0000
csiph-web