Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > sci.electronics.design > #489181
| From | Joerg <news@analogconsultants.com> |
|---|---|
| Newsgroups | sci.electronics.design |
| Subject | Re: Diff amps spec at 500ohms plus, why? |
| Date | 2017-12-23 12:18 -0800 |
| Message-ID | <fa7s10FdcfcU1@mid.individual.net> (permalink) |
| References | <fa2visF9pgmU1@mid.individual.net> <aubt3d1cnu9cbmbijif1vqglrda264ut4c@4ax.com> |
On 2017-12-23 11:36, LM wrote: > On Thu, 21 Dec 2017 15:48:52 -0800, Joerg <news@analogconsultants.com> > wrote: > >> On a design I am working right now I need to drive differential cables >> at up to 100MHz and with gusto, several volts swing. I'd use coax >> instead but the customer is king. Looking at the various diff amps du >> jour I consistently find specs like this: >> >> http://www.ti.com/lit/ds/symlink/ths4503.pdf >> >> That example has all the performance data at an even higher load >> resistance of 800ohms. Considering that regular ribbon is around 100ohms >> diff and even grandpa's old TV cable was 300ohms, what good does that do? >> >> I guess now I have to not just find a diff amp but also add an analog >> diff buffer IC (if they still exist) or roll my own transistor stuff. >> Which will double as a space heater where I really can't use heat. Grumble! > 5V at 100 ohms is 0.25W. Have you checked some RF amplifiers. Like > those in some antenna systems. They use 75R. > Unfortunately they have lousy to no DC performance. They also have poor linearity when the output swings +/-2.5V and most can't even do negative without some tricks. -- Regards, Joerg http://www.analogconsultants.com/
Back to sci.electronics.design | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-21 15:48 -0800
Re: Diff amps spec at 500ohms plus, why? George Herold <gherold@teachspin.com> - 2017-12-21 18:53 -0800
Re: Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-22 09:31 -0800
Re: Diff amps spec at 500ohms plus, why? Winfield Hill <hill@rowland.harvard.edu> - 2017-12-21 19:48 -0800
Re: Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-22 09:34 -0800
Re: Diff amps spec at 500ohms plus, why? bloggs.fredbloggs.fred@gmail.com - 2017-12-24 09:37 -0800
Re: Diff amps spec at 500ohms plus, why? John Larkin <jjlarkin@highlandtechnology.com> - 2017-12-21 19:55 -0800
Re: Diff amps spec at 500ohms plus, why? John Larkin <jjlarkin@highlandtechnology.com> - 2017-12-21 19:59 -0800
Re: Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-22 09:39 -0800
Re: Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-22 12:07 -0800
Re: Diff amps spec at 500ohms plus, why? John Larkin <jjlarkin@highland_snip_technology.com> - 2017-12-22 12:54 -0800
Re: Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-22 13:29 -0800
Re: Diff amps spec at 500ohms plus, why? John Larkin <jjlarkin@highland_snip_technology.com> - 2017-12-22 14:06 -0800
Re: Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-22 14:19 -0800
Re: Diff amps spec at 500ohms plus, why? John Larkin <jjlarkin@highland_snip_technology.com> - 2017-12-22 14:40 -0800
Re: Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-22 15:16 -0800
Re: Diff amps spec at 500ohms plus, why? John Larkin <jjlarkin@highlandtechnology.com> - 2017-12-22 16:30 -0800
Re: Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-22 16:57 -0800
Re: Diff amps spec at 500ohms plus, why? John Larkin <jjlarkin@highlandtechnology.com> - 2017-12-22 20:33 -0800
Re: Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-23 08:21 -0800
Re: Diff amps spec at 500ohms plus, why? John Larkin <jjlarkin@highlandtechnology.com> - 2017-12-23 10:20 -0800
Re: Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-23 11:33 -0800
Re: Diff amps spec at 500ohms plus, why? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-12-23 13:56 -0500
Re: Diff amps spec at 500ohms plus, why? John Larkin <jjlarkin@highlandtechnology.com> - 2017-12-23 11:08 -0800
Re: Diff amps spec at 500ohms plus, why? Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2017-12-23 14:11 -0500
Re: Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-23 11:42 -0800
Re: Diff amps spec at 500ohms plus, why? LM <sala.nimi@mail.com> - 2017-12-23 21:36 +0200
Re: Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-23 12:18 -0800
Diff amps spec at 500ohms plus, why? Klaus Kragelund <klauskvik@hotmail.com> - 2017-12-25 00:56 -0800
Re: Diff amps spec at 500ohms plus, why? krw@notreal.com - 2017-12-25 08:51 -0500
Re: Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-25 07:26 -0800
Re: Diff amps spec at 500ohms plus, why? krw@notreal.com - 2017-12-25 10:46 -0500
Re: Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-25 07:51 -0800
Re: Diff amps spec at 500ohms plus, why? krw@notreal.com - 2017-12-25 12:53 -0500
Re: Diff amps spec at 500ohms plus, why? John Larkin <jjlarkin@highlandtechnology.com> - 2017-12-25 09:58 -0800
Re: Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-25 11:39 -0800
Re: Diff amps spec at 500ohms plus, why? whit3rd <whit3rd@gmail.com> - 2017-12-25 17:16 -0800
Re: Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-27 16:17 -0800
Re: Diff amps spec at 500ohms plus, why? Lasse Langwadt Christensen <langwadt@fonz.dk> - 2017-12-27 19:06 -0800
Re: Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-28 00:47 -0800
Re: Diff amps spec at 500ohms plus, why? Lasse Langwadt Christensen <langwadt@fonz.dk> - 2017-12-27 16:38 -0800
Re: Diff amps spec at 500ohms plus, why? George Herold <gherold@teachspin.com> - 2017-12-27 18:03 -0800
Re: Diff amps spec at 500ohms plus, why? Joerg <news@analogconsultants.com> - 2017-12-28 00:50 -0800
csiph-web