Re: How to eliminate redundant constant move instructions

Path	csiph.com!x330-a1.tempe.blueboxinc.net!newsfeed.hal-mli.net!feeder3.hal-mli.net!newsfeed.hal-mli.net!feeder1.hal-mli.net!border3.nntp.dca.giganews.com!border1.nntp.dca.giganews.com!nntp.giganews.com!news.iecc.com!lnews.iecc.com!nerds-end
From	amker <amker.cheng@gmail.com>
Newsgroups	comp.compilers
Subject	Re: How to eliminate redundant constant move instructions
Date	Tue, 1 Nov 2011 21:04:24 -0700 (PDT)
Organization	Compilers Central
Lines	36
Sender	news@iecc.com
Approved	comp.compilers@iecc.com
Message-ID	<11-11-011@comp.compilers> (permalink)
References	<11-10-019@comp.compilers> <11-11-004@comp.compilers> <11-11-005@comp.compilers>
NNTP-Posting-Host	lnews.iecc.com
X-Trace	gal.iecc.com 1320288081 6065 64.57.183.34 (3 Nov 2011 02:41:21 GMT)
X-Complaints-To	abuse@iecc.com
NNTP-Posting-Date	Thu, 3 Nov 2011 02:41:21 +0000 (UTC)
Keywords	optimize
Posted-Date	02 Nov 2011 22:41:21 EDT
X-submission-address	compilers@iecc.com
X-moderator-address	compilers-request@iecc.com
X-FAQ-and-archives	http://compilers.iecc.com
Xref	x330-a1.tempe.blueboxinc.net comp.compilers:313

Show key headers only | View raw

On Nov 2, 6:35 am, glen herrmannsfeldt <gah@ugcs.caltech.edu> wrote:
> That is what register renaming is for.  Usually using more than
> the architecturally specified number of registers, the CPU
> internally remaps the registers such that it can keep one value
> in a register while an instruction is being executed out of order.

For this specific case, I previous intention was optimizing codes

rx <- 0
...
use rx
...
ry <- 0
use ry

into

rx <- 0
...
use rx
...
use rx

In this manner, I guess the register renaming won't help,
since the transformation introduces true dependency, right?

> Now, how to choose the > weights when one doesn't know the specific
target processor?  > That is a good question.

How could this happen if middle end does not know the specific
processor? What I can image is there should be a way in which
back end provides information.

Thanks

Back to comp.compilers | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

How to eliminate redundant constant move instructions "Amker.Cheng" <amker.cheng@gmail.com> - 2011-10-31 17:53 +0800
  Re: How to eliminate redundant constant move instructions Kaz Kylheku <kaz@kylheku.com> - 2011-10-31 17:08 +0000
    Re: How to eliminate redundant constant move instructions amker <can.finner@gmail.com> - 2011-11-01 19:01 -0700
    Re: How to eliminate redundant constant move instructions mac <acolvin@efunct.com> - 2011-11-03 02:20 +0000
  Re: How to eliminate redundant constant move instructions George Neuner <gneuner2@comcast.net> - 2011-11-01 14:32 -0400
    Re: How to eliminate redundant constant move instructions glen herrmannsfeldt <gah@ugcs.caltech.edu> - 2011-11-01 22:35 +0000
      Re: How to eliminate redundant constant move instructions amker <can.finner@gmail.com> - 2011-11-01 19:35 -0700
      Re: How to eliminate redundant constant move instructions amker <amker.cheng@gmail.com> - 2011-11-01 21:04 -0700
      Re: How to eliminate redundant constant move instructions George Neuner <gneuner2@comcast.net> - 2011-11-02 12:38 -0400
        Re: How to eliminate redundant constant move instructions Kaz Kylheku <kaz@kylheku.com> - 2011-11-03 03:20 +0000
          Re: How to eliminate redundant constant move instructions George Neuner <gneuner2@comcast.net> - 2011-11-04 13:27 -0400
            Re: How to eliminate redundant constant move instructions glen herrmannsfeldt <gah@ugcs.caltech.edu> - 2011-11-04 21:19 +0000
        Re: How to eliminate redundant constant move instructions glen herrmannsfeldt <gah@ugcs.caltech.edu> - 2011-11-03 03:32 +0000
    Re: How to eliminate redundant constant move instructions amker <can.finner@gmail.com> - 2011-11-01 19:21 -0700
      Re: How to eliminate redundant constant move instructions George Neuner <gneuner2@comcast.net> - 2011-11-04 17:26 -0400
        Re: How to eliminate redundant constant move instructions amker <amker.cheng@gmail.com> - 2011-11-07 17:33 -0800
          Re: How to eliminate redundant constant move instructions Wei-Jen Chen <chenwj@cs.NCTU.edu.tw> - 2011-11-10 08:04 +0000
          Re: How to eliminate redundant constant move instructions George Neuner <gneuner2@comcast.net> - 2011-11-10 18:18 -0500
    Re: How to eliminate redundant constant move instructions amker <amker.cheng@gmail.com> - 2011-11-01 20:58 -0700

csiph-web