Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > aus.computers > #48401
| From | "Rod Speed" <rod.speed.aaa@gmail.com> |
|---|---|
| Newsgroups | aus.computers |
| Subject | Re: SMART self test log |
| Date | 2015-10-08 15:38 +1100 |
| Message-ID | <d7maagF1u5kU1@mid.individual.net> (permalink) |
| References | <mv01k8$sn7$1@speranza.aioe.org> <d7khs4Fir2hU1@mid.individual.net> |
"keithr0" <user@account.invalid> wrote in message news:d7khs4Fir2hU1@mid.individual.net... > On 6/10/2015 6:43 PM, Max wrote: >> I have done a SMART short self test of the suspect hard drive. Here is >> the log: >> >> smartctl 5.43 2012-06-30 r3573 [i686-linux-3.10.4-pmagic] (local build) >> Copyright (C) 2002-12 by Bruce Allen, >> http://smartmontools.sourceforge.net >> >> === START OF INFORMATION SECTION === >> Model Family: Hitachi Travelstar 5K500.B >> Device Model: Hitachi HTS545050B9A300 >> Serial Number: 100527PBN40017DEYYVE >> LU WWN Device Id: 5 000cca 5f1d470ce >> Firmware Version: PB4OC64G >> User Capacity: 500,107,862,016 bytes [500 GB] >> Sector Size: 512 bytes logical/physical >> Device is: In smartctl database [for details use: -P show] >> ATA Version is: 8 >> ATA Standard is: ATA-8-ACS revision 6 >> Local Time is: Tue Oct 6 16:31:35 2015 WST >> SMART support is: Available - device has SMART capability. >> SMART support is: Enabled >> >> === START OF READ SMART DATA SECTION === >> SMART overall-health self-assessment test result: PASSED >> >> General SMART Values: >> Offline data collection status: (0x00) Offline data collection >> activity >> was never started. >> Auto Offline Data Collection: Disabled. >> Self-test execution status: ( 0) The previous self-test >> routine completed >> without error or no self-test has ever >> been run. >> Total time to complete Offline >> data collection: ( 645) seconds. >> Offline data collection >> capabilities: (0x5b) SMART execute Offline immediate. >> Auto Offline data collection on/off support. >> Suspend Offline collection upon new >> command. >> Offline surface scan supported. >> Self-test supported. >> No Conveyance Self-test supported. >> Selective Self-test supported. >> SMART capabilities: (0x0003) Saves SMART data before >> entering >> power-saving mode. >> Supports SMART auto save timer. >> Error logging capability: (0x01) Error logging supported. >> General Purpose Logging supported. >> Short self-test routine >> recommended polling time: ( 2) minutes. >> Extended self-test routine >> recommended polling time: ( 158) minutes. >> SCT capabilities: (0x003d) SCT Status supported. >> SCT Error Recovery Control supported. >> SCT Feature Control supported. >> SCT Data Table supported. >> >> SMART Attributes Data Structure revision number: 16 >> Vendor Specific SMART Attributes with Thresholds: >> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE >> UPDATED WHEN_FAILED RAW_VALUE >> 1 Raw_Read_Error_Rate 0x000b 076 076 062 Pre-fail s >> - 79889020 >> 2 Throughput_Performance 0x0005 100 100 040 Pre-fail >> ine - 0 >> 3 Spin_Up_Time 0x0007 149 149 033 Pre-fail s >> - 2 > >> 4 Start_Stop_Count 0x0012 099 099 000 Old_age ys >> - 2144 > ---- > > That is probably your problem, in general, Nope, laptop drives can do a hell of a lot more than that. > the more often you power up/down a disk the shorter its life. That isn't why it died. >> 5 Reallocated_Sector_Ct 0x0033 095 095 005 Pre-fail s >> - 328 That is the real problem, its been dropped I bet. >> 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail s >> - 0 >> 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail >> ine - 0 >> 9 Power_On_Hours 0x0012 098 098 000 Old_age ys >> - 1221 >> 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail s >> - 0 >> 12 Power_Cycle_Count 0x0032 099 099 000 Old_age ys >> - 2137 >> 191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age ys >> - 0 >> 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age ys >> - 42 >> 193 Load_Cycle_Count 0x0012 099 099 000 Old_age ys >> - 16982 >> 194 Temperature_Celsius 0x0002 211 211 000 Old_age ys >> - 26 (Min/Max 12/44) >> 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age ys >> - 343 >> 197 Current_Pending_Sector 0x0022 100 100 000 Old_age ys >> - 347 >> 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age >> line - 0 >> 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age ys >> - 0 >> 223 Load_Retry_Count 0x000a 100 100 000 Old_age ys >> - 0 >> >> SMART Error Log Version: 1 >> ATA Error Count: 42 (device log contains only the most recent five >> errors) >> CR = Command Register [HEX] >> FR = Features Register [HEX] >> SC = Sector Count Register [HEX] >> SN = Sector Number Register [HEX] >> CL = Cylinder Low Register [HEX] >> CH = Cylinder High Register [HEX] >> DH = Device/Head Register [HEX] >> DC = Device Command Register [HEX] >> ER = Error register [HEX] >> ST = Status register [HEX] >> Powered_Up_Time is measured from power on, and printed as >> DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, >> SS=sec, and sss=millisec. It "wraps" after 49.710 days. >> >> Error 42 occurred at disk power-on lifetime: 1219 hours (50 days + 19 >> hours) >> When the command that caused the error occurred, the device was active >> or idle. >> >> After command completion occurred, registers were: >> ER ST SC SN CL CH DH >> -- -- -- -- -- -- -- >> 40 51 5c eb 7f dc e2 Error: UNC 92 sectors at LBA = 0x02dc7feb = >> 48005099 >> >> Commands leading to the command that caused the error were: >> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name >> -- -- -- -- -- -- -- -- ---------------- -------------------- >> 25 00 7f c8 7f dc e0 00 00:00:25.400 READ DMA EXT >> 25 00 7f 49 7f dc e0 00 00:00:20.900 READ DMA EXT >> 25 00 7f ca 7e dc e0 00 00:00:11.400 READ DMA EXT >> 25 00 01 a9 82 dc e0 00 00:00:11.400 READ DMA EXT >> 25 00 16 93 82 dc e0 00 00:00:11.300 READ DMA EXT >> >> Error 41 occurred at disk power-on lifetime: 1219 hours (50 days + 19 >> hours) >> When the command that caused the error occurred, the device was active >> or idle. >> >> After command completion occurred, registers were: >> ER ST SC SN CL CH DH >> -- -- -- -- -- -- -- >> 40 51 3d 0c 7f dc e2 Error: UNC 61 sectors at LBA = 0x02dc7f0c = >> 48004876 >> >> Commands leading to the command that caused the error were: >> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name >> -- -- -- -- -- -- -- -- ---------------- -------------------- >> 25 00 7f ca 7e dc e0 00 00:00:23.800 READ DMA EXT >> 25 00 01 a9 82 dc e0 00 00:00:23.800 READ DMA EXT >> 25 00 16 93 82 dc e0 00 00:00:22.900 READ DMA EXT >> 25 00 02 c8 7e dc e0 00 00:00:22.900 READ DMA EXT >> 25 00 02 c8 7e dc e0 00 00:00:22.500 READ DMA EXT >> >> Error 40 occurred at disk power-on lifetime: 1219 hours (50 days + 19 >> hours) >> When the command that caused the error occurred, the device was active >> or idle. >> >> After command completion occurred, registers were: >> ER ST SC SN CL CH DH >> -- -- -- -- -- -- -- >> 40 51 0e 62 09 00 e0 Error: UNC 14 sectors at LBA = 0x00000962 = 2402 >> >> Commands leading to the command that caused the error were: >> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name >> -- -- -- -- -- -- -- -- ---------------- -------------------- >> 25 00 10 60 09 00 e0 00 00:00:09.200 READ DMA EXT >> 25 00 02 0a a8 0f e0 00 00:00:09.200 READ DMA EXT >> 25 00 02 00 a8 0f e0 00 00:00:09.200 READ DMA EXT >> 25 00 10 00 08 00 e0 00 00:00:09.200 READ DMA EXT >> 25 00 10 00 08 00 e0 00 00:00:09.100 READ DMA EXT >> >> Error 39 occurred at disk power-on lifetime: 1219 hours (50 days + 19 >> hours) >> When the command that caused the error occurred, the device was active >> or idle. >> >> After command completion occurred, registers were: >> ER ST SC SN CL CH DH >> -- -- -- -- -- -- -- >> 40 51 5c ed 7e dc e2 Error: UNC 92 sectors at LBA = 0x02dc7eed = >> 48004845 >> >> Commands leading to the command that caused the error were: >> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name >> -- -- -- -- -- -- -- -- ---------------- -------------------- >> 25 00 7f ca 7e dc e0 00 00:00:57.900 READ DMA EXT >> 25 00 01 a9 82 dc e0 00 00:00:57.800 READ DMA EXT >> 25 00 16 93 82 dc e0 00 00:00:56.300 READ DMA EXT >> 25 00 02 c8 7e dc e0 00 00:00:56.300 READ DMA EXT >> 25 00 02 c8 7e dc e0 00 00:00:55.600 READ DMA EXT >> >> Error 38 occurred at disk power-on lifetime: 1213 hours (50 days + 13 >> hours) >> When the command that caused the error occurred, the device was active >> or idle. >> >> After command completion occurred, registers were: >> ER ST SC SN CL CH DH >> -- -- -- -- -- -- -- >> 40 51 01 28 09 00 40 Error: UNC at LBA = 0x00000928 = 2344 >> >> Commands leading to the command that caused the error were: >> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name >> -- -- -- -- -- -- -- -- ---------------- -------------------- >> 42 00 01 28 09 00 40 00 00:43:03.700 READ VERIFY SECTOR(S) EXT >> 42 00 01 27 09 00 40 00 00:43:03.700 READ VERIFY SECTOR(S) EXT >> 42 00 01 26 09 00 40 00 00:43:03.700 READ VERIFY SECTOR(S) EXT >> 42 00 01 25 09 00 40 00 00:43:03.700 READ VERIFY SECTOR(S) EXT >> 42 00 01 24 09 00 40 00 00:43:03.700 READ VERIFY SECTOR(S) EXT >> >> SMART Self-test log structure revision number 1 >> Num Test_Description Status Remaining >> LifeTime(hours) LBA_of_first_error >> # 1 Short offline Completed: read failure 80% 1221 >> 4294905856 >> # 2 Short offline Interrupted (host reset) 30% 9 - >> # 3 Short offline Completed: read failure 10% 1214 >> 976158933 >> # 4 Short offline Completed: read failure 40% 1212 2344 >> # 5 Extended offline Aborted by host 90% 2 - >> # 6 Short offline Completed: read failure 80% 1212 >> 4294906201 >> >> SMART Selective self-test log data structure revision number 1 >> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS >> 1 0 0 Not_testing >> 2 0 0 Not_testing >> 3 0 0 Not_testing >> 4 0 0 Not_testing >> 5 0 0 Not_testing >> Selective self-test flags (0x0): >> After scanning selected spans, do NOT read-scan remainder of disk. >> If Selective self-test is pending on power-up, resume after 0 minute >> delay. >
Back to aus.computers | Previous | Next — Previous in thread | Next in thread | Find similar
SMART self test log "Max" <max@val.morgan> - 2015-10-06 16:43 +0800
Re: SMART self test log "Rod Speed" <rod.speed.aaa@gmail.com> - 2015-10-06 19:58 +1100
Re: SMART self test log keithr0 <user@account.invalid> - 2015-10-07 22:35 +1000
Re: SMART self test log "Rod Speed" <rod.speed.aaa@gmail.com> - 2015-10-08 15:38 +1100
Re: SMART self test log Xeno <xenolith@optusnet.com.au> - 2015-10-08 00:29 +1100
Re: SMART self test log "Max" <max@val.morgan> - 2015-10-08 11:44 +0800
Re: SMART self test log Xeno <xenolith@optusnet.com.au> - 2015-10-08 15:30 +1100
Re: SMART self test log "Rod Speed" <rod.speed.aaa@gmail.com> - 2015-10-08 16:07 +1100
Re: SMART self test log keithr0 <user@account.invalid> - 2015-10-08 21:56 +1000
Re: SMART self test log Xeno <xenolith@optusnet.com.au> - 2015-10-08 23:32 +1100
csiph-web