Re: SMART self test log

From	"Rod Speed" <rod.speed.aaa@gmail.com>
Newsgroups	aus.computers
Subject	Re: SMART self test log
Date	2015-10-06 19:58 +1100
Message-ID	<d7hgqpFpjb7U1@mid.individual.net> (permalink)
References	<mv01k8$sn7$1@speranza.aioe.org>

Show all headers | View raw


"Max" <max@val.morgan> wrote in message 
news:mv01k8$sn7$1@speranza.aioe.org...
> I have done a SMART short self test of the suspect hard drive.  Here is 
> the log:
>
> smartctl 5.43 2012-06-30 r3573 [i686-linux-3.10.4-pmagic] (local build)
> Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
>
> === START OF INFORMATION SECTION ===
> Model Family:     Hitachi Travelstar 5K500.B
> Device Model:     Hitachi HTS545050B9A300
> Serial Number:    100527PBN40017DEYYVE
> LU WWN Device Id: 5 000cca 5f1d470ce
> Firmware Version: PB4OC64G
> User Capacity:    500,107,862,016 bytes [500 GB]
> Sector Size:      512 bytes logical/physical
> Device is:        In smartctl database [for details use: -P show]
> ATA Version is:   8
> ATA Standard is:  ATA-8-ACS revision 6
> Local Time is:    Tue Oct  6 16:31:35 2015 WST
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status:  (0x00) Offline data collection activity
> was never started.
> Auto Offline Data Collection: Disabled.
> Self-test execution status:      (   0) The previous self-test routine 
> completed
> without error or no self-test has ever
> been run.
> Total time to complete Offline
> data collection: (  645) seconds.
> Offline data collection
> capabilities: (0x5b) SMART execute Offline immediate.
> Auto Offline data collection on/off support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> No Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities:            (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability:        (0x01) Error logging supported.
> General Purpose Logging supported.
> Short self-test routine
> recommended polling time: (   2) minutes.
> Extended self-test routine
> recommended polling time: ( 158) minutes.
> SCT capabilities:        (0x003d) SCT Status supported.
> SCT Error Recovery Control supported.
> SCT Feature Control supported.
> SCT Data Table supported.
>
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED 
> WHEN_FAILED RAW_VALUE
>  1 Raw_Read_Error_Rate     0x000b   076   076   062    Pre-fail s       - 
> 79889020
>  2 Throughput_Performance  0x0005   100   100   040    Pre-fail ine      - 
> 0
>  3 Spin_Up_Time            0x0007   149   149   033    Pre-fail s       - 
> 2
>  4 Start_Stop_Count        0x0012   099   099   000    Old_age ys       - 
> 2144
>  5 Reallocated_Sector_Ct   0x0033   095   095   005    Pre-fail s       - 
> 328

That is very bad. She's dead, Jim. You into necrophilia ?

>  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail s       - 
> 0
>  8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail ine      - 
> 0
>  9 Power_On_Hours          0x0012   098   098   000    Old_age ys       - 
> 1221
> 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail s       - 
> 0
> 12 Power_Cycle_Count       0x0032   099   099   000    Old_age ys       - 
> 2137
> 191 G-Sense_Error_Rate      0x000a   100   100   000    Old_age ys       - 
> 0
> 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age ys       - 
> 42
> 193 Load_Cycle_Count        0x0012   099   099   000    Old_age ys       - 
> 16982
> 194 Temperature_Celsius     0x0002   211   211   000    Old_age ys       - 
> 26 (Min/Max 12/44)

That's fine.

> 196 Reallocated_Event_Count 0x0032   100   100   000    Old_age ys       - 
> 343

That is very bad. She's dead, Jim. You into necrophilia ?

> 197 Current_Pending_Sector  0x0022   100   100   000    Old_age ys       - 
> 347

That is very bad. She's dead, Jim. You into necrophilia ?

> 198 Offline_Uncorrectable   0x0008   100   100   000    Old_age 
>      -       0
> 199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age ys       - 
> 0
> 223 Load_Retry_Count        0x000a   100   100   000    Old_age ys       - 
> 0
>
> SMART Error Log Version: 1
> ATA Error Count: 42 (device log contains only the most recent five errors)
> CR = Command Register [HEX]
> FR = Features Register [HEX]
> SC = Sector Count Register [HEX]
> SN = Sector Number Register [HEX]
> CL = Cylinder Low Register [HEX]
> CH = Cylinder High Register [HEX]
> DH = Device/Head Register [HEX]
> DC = Device Command Register [HEX]
> ER = Error register [HEX]
> ST = Status register [HEX]
> Powered_Up_Time is measured from power on, and printed as
> DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
> SS=sec, and sss=millisec. It "wraps" after 49.710 days.
>
> Error 42 occurred at disk power-on lifetime: 1219 hours (50 days + 19 
> hours)
>  When the command that caused the error occurred, the device was active or 
> idle.
>
>  After command completion occurred, registers were:
>  ER ST SC SN CL CH DH
>  -- -- -- -- -- -- --
>  40 51 5c eb 7f dc e2  Error: UNC 92 sectors at LBA = 0x02dc7feb = 
> 48005099
>
>  Commands leading to the command that caused the error were:
>  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
>  -- -- -- -- -- -- -- --  ----------------  --------------------
>  25 00 7f c8 7f dc e0 00      00:00:25.400  READ DMA EXT
>  25 00 7f 49 7f dc e0 00      00:00:20.900  READ DMA EXT
>  25 00 7f ca 7e dc e0 00      00:00:11.400  READ DMA EXT
>  25 00 01 a9 82 dc e0 00      00:00:11.400  READ DMA EXT
>  25 00 16 93 82 dc e0 00      00:00:11.300  READ DMA EXT
>
> Error 41 occurred at disk power-on lifetime: 1219 hours (50 days + 19 
> hours)
>  When the command that caused the error occurred, the device was active or 
> idle.
>
>  After command completion occurred, registers were:
>  ER ST SC SN CL CH DH
>  -- -- -- -- -- -- --
>  40 51 3d 0c 7f dc e2  Error: UNC 61 sectors at LBA = 0x02dc7f0c = 
> 48004876
>
>  Commands leading to the command that caused the error were:
>  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
>  -- -- -- -- -- -- -- --  ----------------  --------------------
>  25 00 7f ca 7e dc e0 00      00:00:23.800  READ DMA EXT
>  25 00 01 a9 82 dc e0 00      00:00:23.800  READ DMA EXT
>  25 00 16 93 82 dc e0 00      00:00:22.900  READ DMA EXT
>  25 00 02 c8 7e dc e0 00      00:00:22.900  READ DMA EXT
>  25 00 02 c8 7e dc e0 00      00:00:22.500  READ DMA EXT
>
> Error 40 occurred at disk power-on lifetime: 1219 hours (50 days + 19 
> hours)
>  When the command that caused the error occurred, the device was active or 
> idle.
>
>  After command completion occurred, registers were:
>  ER ST SC SN CL CH DH
>  -- -- -- -- -- -- --
>  40 51 0e 62 09 00 e0  Error: UNC 14 sectors at LBA = 0x00000962 = 2402
>
>  Commands leading to the command that caused the error were:
>  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
>  -- -- -- -- -- -- -- --  ----------------  --------------------
>  25 00 10 60 09 00 e0 00      00:00:09.200  READ DMA EXT
>  25 00 02 0a a8 0f e0 00      00:00:09.200  READ DMA EXT
>  25 00 02 00 a8 0f e0 00      00:00:09.200  READ DMA EXT
>  25 00 10 00 08 00 e0 00      00:00:09.200  READ DMA EXT
>  25 00 10 00 08 00 e0 00      00:00:09.100  READ DMA EXT
>
> Error 39 occurred at disk power-on lifetime: 1219 hours (50 days + 19 
> hours)
>  When the command that caused the error occurred, the device was active or 
> idle.
>
>  After command completion occurred, registers were:
>  ER ST SC SN CL CH DH
>  -- -- -- -- -- -- --
>  40 51 5c ed 7e dc e2  Error: UNC 92 sectors at LBA = 0x02dc7eed = 
> 48004845
>
>  Commands leading to the command that caused the error were:
>  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
>  -- -- -- -- -- -- -- --  ----------------  --------------------
>  25 00 7f ca 7e dc e0 00      00:00:57.900  READ DMA EXT
>  25 00 01 a9 82 dc e0 00      00:00:57.800  READ DMA EXT
>  25 00 16 93 82 dc e0 00      00:00:56.300  READ DMA EXT
>  25 00 02 c8 7e dc e0 00      00:00:56.300  READ DMA EXT
>  25 00 02 c8 7e dc e0 00      00:00:55.600  READ DMA EXT
>
> Error 38 occurred at disk power-on lifetime: 1213 hours (50 days + 13 
> hours)
>  When the command that caused the error occurred, the device was active or 
> idle.
>
>  After command completion occurred, registers were:
>  ER ST SC SN CL CH DH
>  -- -- -- -- -- -- --
>  40 51 01 28 09 00 40  Error: UNC at LBA = 0x00000928 = 2344
>
>  Commands leading to the command that caused the error were:
>  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
>  -- -- -- -- -- -- -- --  ----------------  --------------------
>  42 00 01 28 09 00 40 00      00:43:03.700  READ VERIFY SECTOR(S) EXT
>  42 00 01 27 09 00 40 00      00:43:03.700  READ VERIFY SECTOR(S) EXT
>  42 00 01 26 09 00 40 00      00:43:03.700  READ VERIFY SECTOR(S) EXT
>  42 00 01 25 09 00 40 00      00:43:03.700  READ VERIFY SECTOR(S) EXT
>  42 00 01 24 09 00 40 00      00:43:03.700  READ VERIFY SECTOR(S) EXT
>
> SMART Self-test log structure revision number 1
> Num  Test_Description    Status                  Remaining 
> LifeTime(hours) LBA_of_first_error
> # 1  Short offline       Completed: read failure       80%      1221 
> 4294905856
> # 2  Short offline       Interrupted (host reset)      30% 9         -
> # 3  Short offline       Completed: read failure       10%      1214 
> 976158933
> # 4  Short offline       Completed: read failure       40%      1212 2344
> # 5  Extended offline    Aborted by host               90% 2         -
> # 6  Short offline       Completed: read failure       80%      1212 
> 4294906201
>
> SMART Selective self-test log data structure revision number 1
> SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>    1        0        0  Not_testing
>    2        0        0  Not_testing
>    3        0        0  Not_testing
>    4        0        0  Not_testing
>    5        0        0  Not_testing
> Selective self-test flags (0x0):
>  After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute 
> delay.

Back to aus.computers | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

SMART self test log "Max" <max@val.morgan> - 2015-10-06 16:43 +0800
  Re: SMART self test log "Rod Speed" <rod.speed.aaa@gmail.com> - 2015-10-06 19:58 +1100
  Re: SMART self test log keithr0 <user@account.invalid> - 2015-10-07 22:35 +1000
    Re: SMART self test log "Rod Speed" <rod.speed.aaa@gmail.com> - 2015-10-08 15:38 +1100
  Re: SMART self test log Xeno <xenolith@optusnet.com.au> - 2015-10-08 00:29 +1100
    Re: SMART self test log "Max" <max@val.morgan> - 2015-10-08 11:44 +0800
      Re: SMART self test log Xeno <xenolith@optusnet.com.au> - 2015-10-08 15:30 +1100
    Re: SMART self test log "Rod Speed" <rod.speed.aaa@gmail.com> - 2015-10-08 16:07 +1100
    Re: SMART self test log keithr0 <user@account.invalid> - 2015-10-08 21:56 +1000
      Re: SMART self test log Xeno <xenolith@optusnet.com.au> - 2015-10-08 23:32 +1100

csiph-web