Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1736998

Re: [PATCH] dmaengine: edma: Reject slave configs using a buswidth of 8 and larger

Show all headers | View raw




Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

On 2017-09-21 20:17, Vinod Koul wrote:
> On Sun, Sep 17, 2017 at 04:25:10PM +0200, Stefan Brüns wrote:
>> The driver would happily accept buswidth of 16/32/64 bytes and program
>> garbage to its registers.
> 
> Peter?

Well, eDMA as such has no limitation on the buswidth, the addr_width
become ACNT, counter for the inner loop - which we use to represent the
word length. In theory we could support 32K-1 long word with eDMA, which
we actually do in case of memcpy.

But the driver does state that it supports bus width of 1, 2, 3 and 4 bytes.

These are form the past and I never felt the need to check them.

I think it is fine to reject salve config when asking for longer dev
width. I might revisit later if the need comes..

Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

> 
>>
>> Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
>> ---
>>  drivers/dma/edma.c | 4 ++--
>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
>> index 3879f80a4815..c944ea339425 100644
>> --- a/drivers/dma/edma.c
>> +++ b/drivers/dma/edma.c
>> @@ -887,8 +887,8 @@ static int edma_slave_config(struct dma_chan *chan,
>>  {
>>  	struct edma_chan *echan = to_edma_chan(chan);
>>  
>> -	if (cfg->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES ||
>> -	    cfg->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
>> +	if (cfg->src_addr_width >= DMA_SLAVE_BUSWIDTH_8_BYTES ||
>> +	    cfg->dst_addr_width >= DMA_SLAVE_BUSWIDTH_8_BYTES)
>>  		return -EINVAL;
>>  
>>  	memcpy(&echan->cfg, cfg, sizeof(echan->cfg));
>> -- 
>> 2.14.1
>>
> 

- Péter

Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

[PATCH] dmaengine: edma: Reject slave configs using a buswidth of 8 and larger Stefan Brüns <stefan.bruens@rwth-aachen.de> - 2017-09-17 16:30 +0200
  Re: [PATCH] dmaengine: edma: Reject slave configs using a buswidth  of 8 and larger Vinod Koul <vinod.koul@intel.com> - 2017-09-21 19:20 +0200
    Re: [PATCH] dmaengine: edma: Reject slave configs using a buswidth of  8 and larger Peter Ujfalusi <peter.ujfalusi@ti.com> - 2017-09-21 20:30 +0200
      Re: [PATCH] dmaengine: edma: Reject slave configs using a buswidth of  8 and larger Peter Ujfalusi <peter.ujfalusi@ti.com> - 2017-09-22 08:20 +0200
        Re: [PATCH] dmaengine: edma: Reject slave configs using a buswidth  of 8 and larger Vinod Koul <vinod.koul@intel.com> - 2017-09-22 10:40 +0200

csiph-web