[PATCH v2 0/2] ata: ahci-dm816: new driver

From	Bartosz Golaszewski <bgolaszewski@baylibre.com>
Newsgroups	linux.kernel
Subject	[PATCH v2 0/2] ata: ahci-dm816: new driver
Date	2017-03-14 12:10 +0100
Message-ID	<tkSuZ-7ED-7@gated-at.bofh.it> (permalink)
Organization	linux.* mail to news gateway

Show all headers | View raw

Add support for the on-board SATA controller present on TI DM816 SoCs.

This IP suffers from the same issue DA850 does, that is: if we enable
PMP, but connect the drive directly to the board, the disk cannot be
detected. A workaround similar to the one implemented in ahci-da850 is
included in this driver as well.

Tested on DM8168-EVM.

v1 -> v2:
  PATCH 1/2
    - fixed the size of the mapped register region in the example
    - rephrased the clocks property description

Bartosz Golaszewski (2):
  dt-bindings: ata: add DT bindings for ahci-dm816 SATA controller
  ata: ahci: add support for DaVinci DM816 SATA controller

 .../devicetree/bindings/ata/ahci-dm816.txt         |  21 +++
 drivers/ata/Kconfig                                |   9 +
 drivers/ata/Makefile                               |   1 +
 drivers/ata/ahci_dm816.c                           | 200 +++++++++++++++++++++
 4 files changed, 231 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ata/ahci-dm816.txt
 create mode 100644 drivers/ata/ahci_dm816.c

-- 
2.9.3

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH v2 0/2] ata: ahci-dm816: new driver Bartosz Golaszewski <bgolaszewski@baylibre.com> - 2017-03-14 12:10 +0100

csiph-web