Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1566356
| From | Fu Wei <fu.wei@linaro.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection. |
| Date | 2017-01-25 08:30 +0100 |
| Message-ID | <t3qbL-7cP-5@gated-at.bofh.it> (permalink) |
| References | <t0Ytk-4D1-15@gated-at.bofh.it> <t0YD1-4Gk-45@gated-at.bofh.it> <t3d4S-79G-21@gated-at.bofh.it> <t3pz4-6Kn-17@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
Hi Mark,
On 25 January 2017 at 14:46, Fu Wei <fu.wei@linaro.org> wrote:
> Hi Mark,
>
> On 25 January 2017 at 01:24, Mark Rutland <mark.rutland@arm.com> wrote:
>> On Wed, Jan 18, 2017 at 09:25:32PM +0800, fu.wei@linaro.org wrote:
>>> From: Fu Wei <fu.wei@linaro.org>
>>>
>>> The counter frequency detection call(arch_timer_detect_rate) combines two
>>> ways to get counter frequency: system coprocessor register and MMIO timer.
>>> But in a specific timer init code, we only need one way to try:
>>> getting frequency from MMIO timer register will be needed only when we
>>> init MMIO timer; getting frequency from system coprocessor register will
>>> be needed only when we init arch timer.
>>
>> When I mentioned this splitting before, I had mean that we'd completely
>> separate the two, with separate mmio_rate and sysreg_rate variables.
>
> sorry for misunderstanding.
>
> Are you saying :
>
> diff --git a/drivers/clocksource/arm_arch_timer.c
> b/drivers/clocksource/arm_arch_timer.c
> index 663a57a..eec92f6 100644
> --- a/drivers/clocksource/arm_arch_timer.c
> +++ b/drivers/clocksource/arm_arch_timer.c
> @@ -65,7 +65,8 @@ struct arch_timer {
>
> #define to_arch_timer(e) container_of(e, struct arch_timer, evt)
>
> -static u32 arch_timer_rate;
> +static u32 arch_timer_sysreg_rate ;
> +static u32 arch_timer_mmio_rate;
> static int arch_timer_ppi[ARCH_TIMER_MAX_TIMER_PPI];
>
> static struct clock_event_device __percpu *arch_timer_evt;
>
>
> But what have I learned From ARMv8 ARM is
> AArch64 System register CNTFRQ_EL0 is provided so that software can
> discover the frequency of the system counter.
> CNTFRQ(in CNTCTLBase and CNTBaseN) is provided so that software can
> discover the frequency of the system counter.
> The bit assignments of the registers are identical in the System
> register interface and in the memory-mapped system level interface.
> So I think they both contain the same value : the frequency of the
> system counter, just in different view, and can be accessed in
> different ways.
>
> So do we really need to separate mmio_rate and sysreg_rate variables?
>
> And for CNTFRQ(in CNTCTLBase and CNTBaseN) , we can NOT access it in
> Linux kernel (EL1),
> Because ARMv8 ARM says:
> In a system that implements both Secure and Non-secure states, this
> register is only accessible by Secure accesses.
> That means we still need to get the frequency of the system counter
> from CNTFRQ_EL0 in MMIO timer code.
> This have been proved when I tested this driver on foundation model, I
> got "0" when I access CNTFRQ from Linux kernel (Non-secure EL1)
>
> So I guess the logic of the original code is
> static u32 arch_timer_rate keeps the frequency of the system counter,
> no matter where the value comes from.
> Because they should be the same value. if we have got the frequency
> of the system counter(arch_timer_rate != 0), then we don't need to get
> it again, even in anther way.
*IF* the above is right,
For ARM32, boot with dtb, the original logic and this patch work well.
For ARM64, boot with dtb, if MMIO timer is probed first, and there is
not "clock-frequency" in the node. MMIO timer can't get the
frequency. Because we will get "0" when we access CNTFRQ from Linux
kernel (Non-secure EL1), that means the original logic and this patch
won't work. To fix this issue, we need to get the frequency from
sysreg CNTFRQ_EL0.
For ARM64, boot with ACPI, the original logic and this patch work
well, because we always probe arch_timer first.
So *IF* I understand it correctly, May I suggest that we only get the
frequency from sysreg CNTFRQ_EL0 in this driver?
I think that can simplify the code and avoid the issue when we boot
ARM64 with dtb.
Again, please correct me if I misunderstand something. :-) Great
thanks for your help!
>
> But the above is just my thought, and I believe you're the expert of
> ARM. So please correct me if I misunderstand something. :-)
>
> Thanks!
>>
>> The probing logic relying on this is complicated and fragile, and I
>> think these patches are complicating that further (though I appreciate
>> that's far from the intent).
>>
>> I believe we need to split the MMIO and sysreg timer code apart
>> entirely. I've had a look at that today, though it's been fairly painful
>> so far. It appears some platforms may inadvertently be relying on the
>> order and manner in which the rates are probed, which is a major
>> headache.
>>
>> I will try to attack that some more tomorrow.
>>
>>> This patch separates paths to determine frequency:
>>> Separate out the MMIO frequency and the sysreg frequency detection call,
>>> and use the appropriate one for the counter.
>>>
>>> Signed-off-by: Fu Wei <fu.wei@linaro.org>
>>> ---
>>> drivers/clocksource/arm_arch_timer.c | 40 ++++++++++++++++++++++--------------
>>> 1 file changed, 25 insertions(+), 15 deletions(-)
>>>
>>> diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
>>> index 6484f84..9482481 100644
>>> --- a/drivers/clocksource/arm_arch_timer.c
>>> +++ b/drivers/clocksource/arm_arch_timer.c
>>> @@ -488,23 +488,33 @@ static int arch_timer_starting_cpu(unsigned int cpu)
>>> return 0;
>>> }
>>>
>>> -static void arch_timer_detect_rate(void __iomem *cntbase)
>>> +static void __arch_timer_determine_rate(u32 rate)
>>> {
>>> - /* Who has more than one independent system counter? */
>>> - if (arch_timer_rate)
>>> - return;
>>> + /* Check the timer frequency. */
>>> + if (!arch_timer_rate) {
>>> + if (rate)
>>> + arch_timer_rate = rate;
>>> + else
>>> + pr_warn("frequency not available\n");
>>> + } else if (rate && arch_timer_rate != rate) {
>>> + pr_warn("got different frequency, keep original.\n");
>>> + }
>>> +}
>>
>> This function should be killed off entirely. We need to be able to fail
>> the probe if we cannot determine the rate, and that means we need error
>> handling in the ACPI and DT cases anyway.
>>
>> Thanks,
>> Mark.
>
>
>
> --
> Best regards,
>
> Fu Wei
> Software Engineer
> Red Hat
--
Best regards,
Fu Wei
Software Engineer
Red Hat
Back to linux.kernel | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
[PATCH v20 00/17] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer fu.wei@linaro.org - 2017-01-18 14:30 +0100
[PATCH v20 01/17] clocksource/drivers/arm_arch_timer: Improve printk relevant code fu.wei@linaro.org - 2017-01-18 14:30 +0100
[PATCH v20 02/17] clocksource/drivers/arm_arch_timer: Rename the timer type macros. fu.wei@linaro.org - 2017-01-18 14:30 +0100
[PATCH v20 06/17] clocksource/drivers/arm_arch_timer: rework PPI determination fu.wei@linaro.org - 2017-01-18 14:30 +0100
[PATCH v20 12/17] clocksource/drivers/arm_arch_timer: Refactor MMIO timer probing. fu.wei@linaro.org - 2017-01-18 14:40 +0100
[PATCH v20 16/17] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer fu.wei@linaro.org - 2017-01-18 14:40 +0100
Re: [PATCH v20 16/17] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer Hanjun Guo <hanjun.guo@linaro.org> - 2017-01-19 10:20 +0100
Re: [PATCH v20 16/17] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer Fu Wei <fu.wei@linaro.org> - 2017-01-19 11:10 +0100
Re: [PATCH v20 16/17] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer Hanjun Guo <hanjun.guo@linaro.org> - 2017-01-19 13:50 +0100
[PATCH v20 11/17] clocksource/drivers/arm_arch_timer: Introduce some new structs to prepare for GTDT fu.wei@linaro.org - 2017-01-18 14:40 +0100
Re: [PATCH v20 11/17] clocksource/drivers/arm_arch_timer: Introduce some new structs to prepare for GTDT Hanjun Guo <hanjun.guo@linaro.org> - 2017-01-19 09:30 +0100
Re: [PATCH v20 11/17] clocksource/drivers/arm_arch_timer: Introduce some new structs to prepare for GTDT Fu Wei <fu.wei@linaro.org> - 2017-01-19 11:00 +0100
[PATCH v20 07/17] clocksource/drivers/arm_arch_timer: Separate out device-tree code from arch_timer_detect_rate fu.wei@linaro.org - 2017-01-18 14:40 +0100
[PATCH v20 09/17] clocksource/drivers/arm_arch_timer: Refactor arch_timer_needs_probing fu.wei@linaro.org - 2017-01-18 14:40 +0100
[PATCH v20 13/17] acpi/arm64: Add GTDT table parse driver fu.wei@linaro.org - 2017-01-18 14:40 +0100
Re: [PATCH v20 13/17] acpi/arm64: Add GTDT table parse driver Hanjun Guo <hanjun.guo@linaro.org> - 2017-01-19 10:20 +0100
Re: [PATCH v20 13/17] acpi/arm64: Add GTDT table parse driver Fu Wei <fu.wei@linaro.org> - 2017-01-19 11:40 +0100
Re: [PATCH v20 13/17] acpi/arm64: Add GTDT table parse driver Mark Rutland <mark.rutland@arm.com> - 2017-01-19 12:20 +0100
Re: [PATCH v20 13/17] acpi/arm64: Add GTDT table parse driver Fu Wei <fu.wei@linaro.org> - 2017-01-19 13:30 +0100
[PATCH v20 05/17] clocksource/drivers/arm_arch_timer: Add a new enum for spi type fu.wei@linaro.org - 2017-01-18 14:40 +0100
[PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection. fu.wei@linaro.org - 2017-01-18 14:40 +0100
Re: [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection. Hanjun Guo <hanjun.guo@linaro.org> - 2017-01-19 09:10 +0100
Re: [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection. Fu Wei <fu.wei@linaro.org> - 2017-01-19 10:50 +0100
Re: [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection. Hanjun Guo <hanjun.guo@linaro.org> - 2017-01-19 13:50 +0100
Re: [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection. Mark Rutland <mark.rutland@arm.com> - 2017-01-24 18:30 +0100
Re: [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection. Fu Wei <fu.wei@linaro.org> - 2017-01-25 07:50 +0100
Re: [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection. Fu Wei <fu.wei@linaro.org> - 2017-01-25 08:30 +0100
Re: [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection. Christopher Covington <cov@codeaurora.org> - 2017-01-25 16:40 +0100
Re: [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection. Mark Rutland <mark.rutland@arm.com> - 2017-01-25 18:40 +0100
Re: [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection. Fu Wei <fu.wei@linaro.org> - 2017-01-26 07:00 +0100
Re: [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection. Mark Rutland <mark.rutland@arm.com> - 2017-01-25 18:30 +0100
Re: [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection. Fu Wei <fu.wei@linaro.org> - 2017-01-26 06:50 +0100
Re: [PATCH v20 08/17] clocksource/drivers/arm_arch_timer: Rework counter frequency detection. Mark Rutland <mark.rutland@arm.com> - 2017-01-30 19:00 +0100
[PATCH v20 10/17] clocksource/drivers/arm_arch_timer: Move arch_timer_needs_of_probing into DT init call fu.wei@linaro.org - 2017-01-18 14:40 +0100
[PATCH v20 14/17] clocksource/drivers/arm_arch_timer: Simplify ACPI support code. fu.wei@linaro.org - 2017-01-18 14:40 +0100
[PATCH v20 15/17] acpi/arm64: Add memory-mapped timer support in GTDT driver fu.wei@linaro.org - 2017-01-18 14:40 +0100
[PATCH v20 17/17] acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver fu.wei@linaro.org - 2017-01-18 14:50 +0100
Re: [PATCH v20 00/17] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer Hanjun Guo <hanjun.guo@linaro.org> - 2017-01-19 10:30 +0100
Re: [PATCH v20 00/17] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer Fu Wei <fu.wei@linaro.org> - 2017-01-19 12:20 +0100
Re: [PATCH v20 00/17] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer Mark Rutland <mark.rutland@arm.com> - 2017-01-23 20:00 +0100
Re: [PATCH v20 00/17] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer Fu Wei <fu.wei@linaro.org> - 2017-01-24 06:20 +0100
csiph-web