Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1512206

Re: [PATCH/RFT v2 09/17] regulator: fixed: Add over current event

From Rob Herring <robh@kernel.org>
Newsgroups linux.kernel
Subject Re: [PATCH/RFT v2 09/17] regulator: fixed: Add over current event
Date 2016-10-30 21:50 +0100
Message-ID <sy5dh-16O-53@gated-at.bofh.it> (permalink)
References <svQBH-1Ks-3@gated-at.bofh.it> <svQBH-1Ks-15@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


On Mon, Oct 24, 2016 at 06:46:26PM +0200, ahaslam@baylibre.com wrote:
> From: Axel Haslam <ahaslam@baylibre.com>
> 
> Some regulator supplies have an over-current pin that is
> activated when the hw detects an over current condition.
> When this happens, the hardware enters a current limited
> mode.
> 
> Extend the fixed regulator driver with the ability
> to handle irq's from the over-current pin and report
> an over current event to the consumers via a regulator
> notifier. Also, add device tree bindings to allow to
> pass a gpio for over current monitoring.
> 
> Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
> ---
>  .../bindings/regulator/fixed-regulator.txt         |  4 ++
>  drivers/regulator/fixed.c                          | 64 ++++++++++++++++++++++
>  include/linux/regulator/consumer.h                 |  5 ++
>  include/linux/regulator/fixed.h                    |  3 +
>  4 files changed, 76 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
> index 4fae41d..d20bf67 100644
> --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
> +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
> @@ -11,6 +11,8 @@ If this property is missing, the default assumed is Active low.
>  - gpio-open-drain: GPIO is open drain type.
>    If this property is missing then default assumption is false.
>  -vin-supply: Input supply name.
> +- oc-gpio: Input gpio that signals an over current condition

"-gpios" is the preferred form. So "oc-gpios".

> +- oc-active-high: The polarity of the over current pin is high

This should be specified in the gpio flags cell.

Rob

Back to linux.kernel | Previous | Next | Find similar | Unroll thread


Thread

Re: [PATCH/RFT v2 09/17] regulator: fixed: Add over current event Rob Herring <robh@kernel.org> - 2016-10-30 21:50 +0100

csiph-web