Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > linux.kernel > #1399391

RE: [PATCH 2/2] i2c: qup: Fixed the DMA segments length

From Abhishek Sahu <absahu@codeaurora.org>
Newsgroups linux.kernel
Subject RE: [PATCH 2/2] i2c: qup: Fixed the DMA segments length
Date 2016-05-11 19:50 +0200
Message-ID <rxGqK-4tl-13@gated-at.bofh.it> (permalink)
References <rwSNj-5L9-3@gated-at.bofh.it> <rwSNj-5L9-1@gated-at.bofh.it> <rxF1F-3io-33@gated-at.bofh.it>
Organization linux.* mail to news gateway

Show all headers | View raw


On 2016-05-11 21:48, Sricharan wrote:
> Hi,
> 
>> 1. The current QCOM I2C driver code is failing for transfer length 
>> greater
>> than 255. This is happening due to improper segments length as the I2C 
>> DMA
>> segments can be maximum of 256 bytes.
>> 
>> 2. The transfer length tlen was being initialized with 0 for 256 
>> bytes,
>> which is
>> being passed for DMA mappings resulting in improper DMA mapping 
>> length.
>> 
>> This patch fixes the above said problems by initializing the block 
>> count
>> with
>> the values calculated in qup_i2c_set_blk_data and calculating the
> remaining
>> length for last DMA segment. Also, the block data length need to be
>> decremented after each transfer. Additionally, this patch corrects the
>> tlen
>> assignment for DMA mapping.
>> 
>> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
>> ---
>>  drivers/i2c/busses/i2c-qup.c | 12 +++++++-----
>>  1 file changed, 7 insertions(+), 5 deletions(-)
>> 
>> diff --git a/drivers/i2c/busses/i2c-qup.c 
>> b/drivers/i2c/busses/i2c-qup.c
>> index
>> 8c2f1bc..6d6b7dc 100644
>> --- a/drivers/i2c/busses/i2c-qup.c
>> +++ b/drivers/i2c/busses/i2c-qup.c
>> @@ -651,23 +651,24 @@ static int qup_i2c_bam_do_xfer(struct
>> qup_i2c_dev *qup, struct i2c_msg *msg,
>>  	u8 *tags;
>> 
>>  	while (idx < num) {
>> -		blocks = (msg->len + limit) / limit;
>> -		rem = msg->len % limit;
>>  		tx_len = 0, len = 0, i = 0;
>> 
>>  		qup->is_last = (idx == (num - 1));
>> 
>>  		qup_i2c_set_blk_data(qup, msg);
>> 
>> +		blocks = qup->blk.count;
>> +		rem = msg->len - (blocks - 1) * limit;
>> +
>       Same if we had blocks = (msg->len + limit - 1) / limit instead of 
> the
> above ?
Yes. We calculating this inside qup_i2c_set_blk_data and assigning the 
same value to
qup->blk.count so I am using this to avoid redundant arithmetic 
operations.
>      Otherwise,
>      Reviewed-by: Sricharan@codeaurora.org
> 
> Regards,
>  Sricharan

-- 
Abhishek Sahu

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread


Thread

[PATCH 2/2] i2c: qup: Fixed the DMA segments length Abhishek Sahu <absahu@codeaurora.org> - 2016-05-09 14:50 +0200
  RE: [PATCH 2/2] i2c: qup: Fixed the DMA segments length "Sricharan" <sricharan@codeaurora.org> - 2016-05-11 18:20 +0200
    RE: [PATCH 2/2] i2c: qup: Fixed the DMA segments length Abhishek Sahu <absahu@codeaurora.org> - 2016-05-11 19:50 +0200

csiph-web