Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1399391
| From | Abhishek Sahu <absahu@codeaurora.org> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | RE: [PATCH 2/2] i2c: qup: Fixed the DMA segments length |
| Date | 2016-05-11 19:50 +0200 |
| Message-ID | <rxGqK-4tl-13@gated-at.bofh.it> (permalink) |
| References | <rwSNj-5L9-3@gated-at.bofh.it> <rwSNj-5L9-1@gated-at.bofh.it> <rxF1F-3io-33@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
On 2016-05-11 21:48, Sricharan wrote:
> Hi,
>
>> 1. The current QCOM I2C driver code is failing for transfer length
>> greater
>> than 255. This is happening due to improper segments length as the I2C
>> DMA
>> segments can be maximum of 256 bytes.
>>
>> 2. The transfer length tlen was being initialized with 0 for 256
>> bytes,
>> which is
>> being passed for DMA mappings resulting in improper DMA mapping
>> length.
>>
>> This patch fixes the above said problems by initializing the block
>> count
>> with
>> the values calculated in qup_i2c_set_blk_data and calculating the
> remaining
>> length for last DMA segment. Also, the block data length need to be
>> decremented after each transfer. Additionally, this patch corrects the
>> tlen
>> assignment for DMA mapping.
>>
>> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
>> ---
>> drivers/i2c/busses/i2c-qup.c | 12 +++++++-----
>> 1 file changed, 7 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-qup.c
>> b/drivers/i2c/busses/i2c-qup.c
>> index
>> 8c2f1bc..6d6b7dc 100644
>> --- a/drivers/i2c/busses/i2c-qup.c
>> +++ b/drivers/i2c/busses/i2c-qup.c
>> @@ -651,23 +651,24 @@ static int qup_i2c_bam_do_xfer(struct
>> qup_i2c_dev *qup, struct i2c_msg *msg,
>> u8 *tags;
>>
>> while (idx < num) {
>> - blocks = (msg->len + limit) / limit;
>> - rem = msg->len % limit;
>> tx_len = 0, len = 0, i = 0;
>>
>> qup->is_last = (idx == (num - 1));
>>
>> qup_i2c_set_blk_data(qup, msg);
>>
>> + blocks = qup->blk.count;
>> + rem = msg->len - (blocks - 1) * limit;
>> +
> Same if we had blocks = (msg->len + limit - 1) / limit instead of
> the
> above ?
Yes. We calculating this inside qup_i2c_set_blk_data and assigning the
same value to
qup->blk.count so I am using this to avoid redundant arithmetic
operations.
> Otherwise,
> Reviewed-by: Sricharan@codeaurora.org
>
> Regards,
> Sricharan
--
Abhishek Sahu
Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread
[PATCH 2/2] i2c: qup: Fixed the DMA segments length Abhishek Sahu <absahu@codeaurora.org> - 2016-05-09 14:50 +0200
RE: [PATCH 2/2] i2c: qup: Fixed the DMA segments length "Sricharan" <sricharan@codeaurora.org> - 2016-05-11 18:20 +0200
RE: [PATCH 2/2] i2c: qup: Fixed the DMA segments length Abhishek Sahu <absahu@codeaurora.org> - 2016-05-11 19:50 +0200
csiph-web