Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > sci.physics > #813428
| From | Sergio <invalid@invalid.com> |
|---|---|
| Newsgroups | sci.physics |
| Subject | Re: Wind turbines- blade area or swept area for power? |
| Date | 2020-12-28 08:19 -0600 |
| Organization | Aioe.org NNTP Server |
| Message-ID | <rscphg$u1h$2@gioia.aioe.org> (permalink) |
| References | <rsck5t$j2f$1@dont-email.me> |
On 12/28/2020 6:47 AM, Dave wrote: > > Looking at > https://en.wikipedia.org/wiki/Wind_turbine_design#cite_note-10 and > https://web.archive.org/web/20120426062213/http://www.renewwisconsin.org/wind/Toolbox-Homeowners/Back%20to%20the%20basics%205-Collector%20Size.pdf, > there seems to be an oversimplification about wind turbines. > > How exactly is power output proportional to blade length squared if the > blades get shorter as they get longer? it is simply swept area, the area the blade covers, so the length of a blade is the radius of the circle, r, A = r^2 > This seems counter intuitive > which is often correct for human scale. My impression is that turbine > design is going for size (not height) because of macho needs, in the > same way as city skyscrapers. Have they tried putting tips on the > blades to increase the area? This was done by Westland helicopters back > in the 1980s to break world records. the height is needed to get to faster moving air, and keep away from ground turbulance. > > In the same vein I am trying to work through if many smallish turbines > on gantries high up would be a good idea. It certainly would be for > maintability, since 4 people could change one with a hoist and winch, > without needing a USD 40,000 per day barge and crane. Still haven't > worked through changing the angle to face into the wind from all angles, > since they would block each other when side on. Might be OK is places > with a prevailing wind direction, and you could vary the angle by +/- 30 > degrees or so. With gantry arrays you could always be sure of getting > something, since they don't all need to face the same way. There would > be a pillar on a tripod support. Each pillar would have about 7 beams > to the other pillar and each beam would have poles for turbines, one up, > one down each with a 12 kW turbine. The poles are needed to allow for a > certain amount of rotation. So 14 on each gantry 7 up, 7 down. In > total about 1.1MW with 98 turbines you can buy as commodities on-line. > (e.g. 8kW turbine is GBP 1,500). There might be vibration challenges if > they all spin at the same speed, so might need to ensure slightly > different speeds for each. Problem probably is the amount of steel > needed, so after an initial prototype you might want to put them on > cables, and have a power web. need to get maps of average wind speed, and wind speed varance, and direction for your site. there may or may not be enough wind to cover the cost of putting the thing up. There are probably maps on the internet somewhere that have the best places for wind energy, west texas is one. Then, you have to look at maintenance costs for the long haul, if it costs 1 million to put up, and you get 1 million in electricity over 5 years then you have to replace 20 percent of it.... maintenance costs ate up the South Point wind farm in Hawaii, it was un affordable in the long haul.
Back to sci.physics | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread
Wind turbines- blade area or swept area for power? Dave <dwickford@yahoo.com> - 2020-12-28 12:47 +0000
Re: Wind turbines- blade area or swept area for power? Andy Everett <andyeverett57@gmail.com> - 2020-12-28 05:29 -0800
Re: Wind turbines- blade area or swept area for power? Andy Everett <andyeverett57@gmail.com> - 2020-12-28 05:55 -0800
Re: Wind turbines- blade area or swept area for power? Andy Everett <andyeverett57@gmail.com> - 2020-12-28 05:55 -0800
Re: Wind turbines- blade area or swept area for power? Sergio <invalid@invalid.com> - 2020-12-28 08:20 -0600
Re: Wind turbines- blade area or swept area for power? Andy Everett <andyeverett57@gmail.com> - 2020-12-28 06:23 -0800
Re: Wind turbines- blade area or swept area for power? moroney@world.std.spaamtrap.com (Michael Moroney) - 2020-12-28 18:03 +0000
Re: Wind turbines- blade area or swept area for power? Sergio <invalid@invalid.com> - 2020-12-28 12:26 -0600
Re: Wind turbines- blade area or swept area for power? Sergio <invalid@invalid.com> - 2020-12-28 08:19 -0600
Re: Wind turbines- blade area or swept area for power? Dave <dwickford@yahoo.com> - 2020-12-28 23:52 +0000
Re: Wind turbines- blade area or swept area for power? "edpr...@gmail.com" <edprochak@gmail.com> - 2020-12-29 13:02 -0800
Re: Wind turbines- blade area or swept area for power? Sergio <invalid@invalid.com> - 2020-12-30 21:32 -0600
Re: Wind turbines- blade area or swept area for power? mike <this@address.is.invalid> - 2021-04-02 09:36 +0530
csiph-web