Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > sci.physics > #813419

Wind turbines- blade area or swept area for power?

From Dave <dwickford@yahoo.com>
Newsgroups sci.physics, alt.sci.physics
Subject Wind turbines- blade area or swept area for power?
Date 2020-12-28 12:47 +0000
Organization A noiseless patient Spider
Message-ID <rsck5t$j2f$1@dont-email.me> (permalink)

Cross-posted to 2 groups.

Show all headers | View raw


Looking at 
https://en.wikipedia.org/wiki/Wind_turbine_design#cite_note-10 and 
https://web.archive.org/web/20120426062213/http://www.renewwisconsin.org/wind/Toolbox-Homeowners/Back%20to%20the%20basics%205-Collector%20Size.pdf, 
there seems to be an oversimplification about wind turbines.

How exactly is power output proportional to blade length squared if the 
blades get shorter as they get longer?  This seems counter intuitive 
which is often correct for human scale. My impression is that turbine 
design is going for size (not height) because of macho needs, in the 
same way as city skyscrapers.   Have they tried putting tips on the 
blades to increase the area?  This was done by Westland helicopters back 
in the 1980s to break world records.

In the same vein I am trying to work through if many smallish turbines 
on gantries high up would be a good idea.  It certainly would be for 
maintability, since 4 people could change one with a hoist and winch, 
without needing a USD 40,000 per day barge and crane.  Still haven't 
worked through changing the angle to face into the wind from all angles, 
since they would block each other when side on.  Might be OK is places 
with a prevailing wind direction, and you could vary the angle by +/- 30 
degrees or so.  With gantry arrays you could always be sure of getting 
something, since they don't all need to face the same way. There would 
be a pillar on a tripod support.  Each pillar would have about 7 beams 
to the other pillar and each beam would have poles for turbines, one up, 
one down each with a 12 kW turbine. The poles are needed to allow for a 
certain amount of rotation.  So 14 on each gantry 7 up, 7 down.  In 
total about 1.1MW with 98 turbines you can buy as commodities on-line. 
(e.g. 8kW turbine is GBP 1,500). There might be vibration challenges if 
they all spin at the same speed, so might need to ensure slightly 
different speeds for each. Problem probably is the amount of steel 
needed, so after an initial prototype you might want to put them on 
cables, and have a power web.

Back to sci.physics | Previous | Next — Next in thread | Find similar | Unroll thread


Thread

Wind turbines- blade area or swept area for power? Dave <dwickford@yahoo.com> - 2020-12-28 12:47 +0000
  Re: Wind turbines- blade area or swept area for power? Andy Everett <andyeverett57@gmail.com> - 2020-12-28 05:29 -0800
  Re: Wind turbines- blade area or swept area for power? Andy Everett <andyeverett57@gmail.com> - 2020-12-28 05:55 -0800
  Re: Wind turbines- blade area or swept area for power? Andy Everett <andyeverett57@gmail.com> - 2020-12-28 05:55 -0800
    Re: Wind turbines- blade area or swept area for power? Sergio <invalid@invalid.com> - 2020-12-28 08:20 -0600
      Re: Wind turbines- blade area or swept area for power? Andy Everett <andyeverett57@gmail.com> - 2020-12-28 06:23 -0800
        Re: Wind turbines- blade area or swept area for power? moroney@world.std.spaamtrap.com (Michael Moroney) - 2020-12-28 18:03 +0000
          Re: Wind turbines- blade area or swept area for power? Sergio <invalid@invalid.com> - 2020-12-28 12:26 -0600
  Re: Wind turbines- blade area or swept area for power? Sergio <invalid@invalid.com> - 2020-12-28 08:19 -0600
  Re: Wind turbines- blade area or swept area for power? Dave <dwickford@yahoo.com> - 2020-12-28 23:52 +0000
    Re: Wind turbines- blade area or swept area for power? "edpr...@gmail.com" <edprochak@gmail.com> - 2020-12-29 13:02 -0800
      Re: Wind turbines- blade area or swept area for power? Sergio <invalid@invalid.com> - 2020-12-30 21:32 -0600
    Re: Wind turbines- blade area or swept area for power? mike <this@address.is.invalid> - 2021-04-02 09:36 +0530

csiph-web