Re: Good Hardware Tools

From	Don Y <blockedofcourse@foo.invalid>
Newsgroups	comp.arch.embedded
Subject	Re: Good Hardware Tools
Date	2020-11-28 09:54 -0700
Organization	A noiseless patient Spider
Message-ID	<rptvca$kvg$1@dont-email.me> (permalink)
References	(8 earlier) <zavrhjmncnay.qkazxn0.pminews@nntp.aioe.org> <8f76a370-6d9c-48f6-88b3-1a09939c028cn@googlegroups.com> <zavrhjmncnay.qkghzc0.pminews@nntp.aioe.org> <948ca361-1dd7-4092-86bc-4dd8aae83ed0n@googlegroups.com> <zavrhjmncnay.qkj1as0.pminews@nntp.aioe.org>

Show all headers | View raw

On 11/28/2020 9:04 AM, Mat Nieuwenhoven wrote:
> I have not looked into it, but it does. The previous one (an 20+
> years old Bosch) did it too. There is no air connection between
> freeze and cool department. Both the old and new fridge both have a
> digital display where you set freeze and  cool temperatures
> independently. They must have some valve or other control thing for
> it. In fact, some fridges have even different temparature zones
> inside the cooler department.

This is increasingly common, here, with "multiple compartment" (> 2)
units.  A separate evaporator in each compartment allows the temperature
in each to be independently controlled.  So, you can opt to have two
freezer compartments, a refrigerator compartment and a "chiller"
compartment.  Or, some other combination (up to and including
all refrigerator or freezer)

Each compartment independently "calls for cooling", as needed.  If
any do so, the compressor is started and refrigerant gated through
the applicable evaporator.

Sadly, we've been "waved off" of many of the units we've looked at
as too costly and short lifespan (based on industry insiders).
I'd rather spend money for electricity and KNOW my 'frig is
going to keep running than worry about it sh*tting the bed while
full of foodstuffs!  Then I'd be faced with needing to find a
repair/replacement ASAP (and there is some opportunity cost, there)

Thread

Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-10-29 20:17 -0700
  Re: Good Hardware Tools Paul Rubin <no.email@nospam.invalid> - 2020-10-29 23:52 -0700
    Re: Good Hardware Tools Theo <theom+news@chiark.greenend.org.uk> - 2020-10-30 10:19 +0000
  Re: Good Hardware Tools Chris <xxx.syseng.yyy@gfsys.co.uk> - 2020-10-31 00:21 +0000
  Re: Good Hardware Tools Dave Nadler <drn@nadler.com> - 2020-10-30 17:56 -0700
    Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-10-30 20:40 -0700
  Re: Good Hardware Tools Philip Martel <pmartel@alum.mit.edu> - 2020-10-31 14:54 -0400
    Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-04 20:13 -0800
      Re: Good Hardware Tools kegs@provalid.com (Kent Dickey) - 2020-11-13 17:10 -0600
        Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-15 19:43 -0800
          Re: Good Hardware Tools Brett <ggtgp@yahoo.com> - 2020-11-16 19:31 +0000
            Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-17 01:50 -0800
              Re: Good Hardware Tools Stef <stef33d@yahooI-N-V-A-L-I-D.com.invalid> - 2020-11-17 11:14 +0100
                Re: Good Hardware Tools Brett <ggtgp@yahoo.com> - 2020-11-18 04:14 +0000
              Re: Good Hardware Tools George Neuner <gneuner2@comcast.net> - 2020-11-17 12:05 -0500
                Re: Good Hardware Tools Paul Rubin <no.email@nospam.invalid> - 2020-11-17 10:06 -0800
                Re: Good Hardware Tools George Neuner <gneuner2@comcast.net> - 2020-11-17 16:02 -0500
                Re: Good Hardware Tools Jim Jackson <jj@franjam.org.uk> - 2020-11-17 22:28 +0000
                Re: Good Hardware Tools David Brown <david.brown@hesbynett.no> - 2020-11-18 11:11 +0100
                Re: Good Hardware Tools Tauno Voipio <tauno.voipio@notused.fi.invalid> - 2020-11-18 12:40 +0200
                Re: Good Hardware Tools Niklas Holsti <niklas.holsti@tidorum.invalid> - 2020-11-18 14:51 +0200
                Re: Good Hardware Tools Hans-Bernhard Bröker <HBBroeker@t-online.de> - 2020-11-18 21:46 +0100
                Re: Good Hardware Tools David Brown <david.brown@hesbynett.no> - 2020-11-18 22:29 +0100
                Re: Good Hardware Tools Paul Rubin <no.email@nospam.invalid> - 2020-11-18 12:45 -0800
                Re: Good Hardware Tools Tom Gardner <spamjunk@blueyonder.co.uk> - 2020-11-18 21:08 +0000
                Re: Good Hardware Tools Hans-Bernhard Bröker <HBBroeker@t-online.de> - 2020-11-19 00:35 +0100
                Re: Good Hardware Tools Phil Hobbs <pcdhSpamMeSenseless@electrooptical.net> - 2020-11-18 16:12 -0500
                Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-18 17:30 -0800
                Re: Good Hardware Tools Paul Rubin <no.email@nospam.invalid> - 2020-11-18 23:36 -0800
                Re: Good Hardware Tools Jim Jackson <jj@franjam.org.uk> - 2020-11-19 22:31 +0000
                Re: Good Hardware Tools Paul Rubin <no.email@nospam.invalid> - 2020-11-19 14:43 -0800
                Re: Good Hardware Tools Jim Jackson <jj@franjam.org.uk> - 2020-11-20 22:13 +0000
                Re: Good Hardware Tools Paul Rubin <no.email@nospam.invalid> - 2020-11-20 18:01 -0800
                Re: Good Hardware Tools James Brakefield <jim.brakefield@ieee.org> - 2020-11-21 11:39 -0800
                Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-18 03:15 -0800
                Re: Good Hardware Tools David Brown <david.brown@hesbynett.no> - 2020-11-17 22:25 +0100
                Re: Good Hardware Tools Dave Nadler <drn@nadler.com> - 2020-11-17 16:30 -0500
                Re: Good Hardware Tools Paul Rubin <no.email@nospam.invalid> - 2020-11-17 14:18 -0800
            Re: Good Hardware Tools "Mat Nieuwenhoven" <mnieuw@zap.a2000.nl> - 2020-11-23 13:39 +0100
              Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-23 07:49 -0800
                Re: Good Hardware Tools "Mat Nieuwenhoven" <mnieuw@zap.a2000.nl> - 2020-11-24 08:53 +0100
                Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-24 10:46 -0800
                Re: Good Hardware Tools Paul Rubin <no.email@nospam.invalid> - 2020-11-24 13:46 -0800
                Re: Good Hardware Tools "Mat Nieuwenhoven" <mnieuw@zap.a2000.nl> - 2020-11-27 08:11 +0100
                Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-27 06:58 -0800
                Re: Good Hardware Tools Richard Damon <Richard@Damon-Family.org> - 2020-11-27 10:17 -0500
                Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-27 08:04 -0800
                Re: Good Hardware Tools "Mat Nieuwenhoven" <mnieuw@zap.a2000.nl> - 2020-11-28 17:04 +0100
                Re: Good Hardware Tools Don Y <blockedofcourse@foo.invalid> - 2020-11-28 09:54 -0700
                Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-28 09:05 -0800
                Re: Good Hardware Tools "Mat Nieuwenhoven" <mnieuw@zap.a2000.nl> - 2020-11-29 17:30 +0100
                Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-29 11:10 -0800
                Re: Good Hardware Tools "Mat Nieuwenhoven" <mnieuw@zap.a2000.nl> - 2020-11-30 08:19 +0100
                Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-30 07:46 -0800
                Re: Good Hardware Tools "Mat Nieuwenhoven" <mnieuw@zap.a2000.nl> - 2020-12-06 17:55 +0100
                Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-12-06 15:04 -0800
                Re: Good Hardware Tools Mat Nieuwenhoven <mnieuw@zap.a2000.nl> - 2021-01-03 11:03 +0000
                Re: Good Hardware Tools Brett <ggtgp@yahoo.com> - 2021-01-04 09:03 +0000
                Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2021-01-04 04:09 -0800
                Re: Good Hardware Tools Mat Nieuwenhoven <mnieuw@zap.a2000.nl> - 2021-01-04 21:57 +0000
                Re: Good Hardware Tools Don Y <blockedofcourse@foo.invalid> - 2021-01-04 02:55 -0700
                Re: Good Hardware Tools Grant Edwards <invalid@invalid.invalid> - 2020-11-28 20:53 +0000
                Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-28 15:16 -0800
                Re: Good Hardware Tools Richard Damon <Richard@Damon-Family.org> - 2020-11-28 20:57 -0500
                Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-28 18:07 -0800
                Re: Good Hardware Tools Tauno Voipio <tauno.voipio@notused.fi.invalid> - 2020-11-29 10:43 +0200
                Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-29 11:00 -0800
                Re: Good Hardware Tools "Mat Nieuwenhoven" <mnieuw@zap.a2000.nl> - 2020-11-30 08:01 +0100
                Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-30 07:40 -0800
                Re: Good Hardware Tools Chris <xxx.syseng.yyy@gfsys.co.uk> - 2020-11-30 15:41 +0000
                Re: Good Hardware Tools "Mat Nieuwenhoven" <mnieuw@zap.a2000.nl> - 2020-11-29 15:22 +0100
                Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-29 11:04 -0800
                Re: Good Hardware Tools Don Y <blockedofcourse@foo.invalid> - 2020-11-29 14:46 -0700
                Re: Good Hardware Tools "Mat Nieuwenhoven" <mnieuw@zap.a2000.nl> - 2020-11-29 15:11 +0100
                Re: Good Hardware Tools Grant Edwards <invalid@invalid.invalid> - 2020-11-29 23:24 +0000
                Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-29 17:57 -0800
                Re: Good Hardware Tools "Mat Nieuwenhoven" <mnieuw@zap.a2000.nl> - 2020-11-30 08:32 +0100
                Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-30 08:03 -0800
          Re: Good Hardware Tools Paul Rubin <no.email@nospam.invalid> - 2020-11-16 13:13 -0800
          Re: Good Hardware Tools kegs@provalid.com (Kent Dickey) - 2020-11-17 22:56 -0600
            Re: Good Hardware Tools Rick C <gnuarm.deletethisbit@gmail.com> - 2020-11-18 03:20 -0800

csiph-web