PID controller: dummy questions

From	pozz <pozzugno@gmail.com>
Newsgroups	comp.arch.embedded
Subject	PID controller: dummy questions
Date	2020-06-25 19:55 +0200
Organization	A noiseless patient Spider
Message-ID	<rd2odq$oiv$1@dont-email.me> (permalink)

Show all headers | View raw

I'm trying to implement a PID controller in C for an embbeded system. 
This is the first time. I think I haven't fully understand the theory.

For the proportional term, we have an output from PID controller that is

   P = Kp*err

Suppose I have a power supply with a variable output voltage. The power 
supply output is connected to a low-value resistor that dissipates power 
and transfer heat to some water. I need to reach and maintain a 
temperature of the water by increasing/decreasing voltage across the 
resistor (i.e., the dissipated power).
The loop is closed by the temperature measurement.


Goal = 80°C. Kp = 0.1V/°C.

FIRST STEP
T = 20°C. Error = 60°C. P = 6V.
Should I set the power supply output voltage to 6V? I think so.

SECOND STEP
T = 30°C. Error = 50°C. P = 5V.
Should I set Vout=5V or increase Vout by 5V so setting it to 11V?


The mathematics say the output of PID controller *is* Kp*err, but I'm 
not sure. With the increase of temperature, the errore decreases to a 
minimum, so the Vout. At the steady state the error should be zero, but 
the voltage from the power supply can't be zero.

So I'm thinking to implement the proportional term as:

   Vout += kp*err  (note +=)

but this isn't what I found in literature.

Back to comp.arch.embedded | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

PID controller: dummy questions pozz <pozzugno@gmail.com> - 2020-06-25 19:55 +0200
  Re: PID controller: dummy questions Hans-Bernhard Bröker <HBBroeker@t-online.de> - 2020-06-25 21:14 +0200
  Re: PID controller: dummy questions DJ Delorie <dj@delorie.com> - 2020-06-25 15:29 -0400
    Re: PID controller: dummy questions David Brown <david.brown@hesbynett.no> - 2020-06-26 08:43 +0200
  Re: PID controller: dummy questions Richard Damon <Richard@Damon-Family.org> - 2020-06-25 22:21 -0400
  Re: PID controller: dummy questions pozz <pozzugno@gmail.com> - 2020-06-26 10:59 +0200
    Re: PID controller: dummy questions David Brown <david.brown@hesbynett.no> - 2020-06-26 11:07 +0200
    Re: PID controller: dummy questions Rick C <gnuarm.deletethisbit@gmail.com> - 2020-06-26 09:10 -0700
    Re: PID controller: dummy questions Richard Damon <Richard@Damon-Family.org> - 2020-06-26 12:29 -0400
      Re: PID controller: dummy questions Rick C <gnuarm.deletethisbit@gmail.com> - 2020-06-26 12:00 -0700
        Re: PID controller: dummy questions Richard Damon <Richard@Damon-Family.org> - 2020-06-26 22:24 -0400
          Re: PID controller: dummy questions Paul Rubin <no.email@nospam.invalid> - 2020-06-26 21:41 -0700
            Re: PID controller: dummy questions DJ Delorie <dj@delorie.com> - 2020-06-27 01:15 -0400
              Re: PID controller: dummy questions Paul Rubin <no.email@nospam.invalid> - 2020-06-26 23:12 -0700
                Re: PID controller: dummy questions Rick C <gnuarm.deletethisbit@gmail.com> - 2020-06-27 00:07 -0700
                Re: PID controller: dummy questions pozz <pozzugno@gmail.com> - 2020-06-27 16:53 +0200
                Re: PID controller: dummy questions David Brown <david.brown@hesbynett.no> - 2020-06-27 17:31 +0200
                Re: PID controller: dummy questions Rick C <gnuarm.deletethisbit@gmail.com> - 2020-06-27 10:09 -0700
                Re: PID controller: dummy questions Rick C <gnuarm.deletethisbit@gmail.com> - 2020-06-27 15:44 -0700
                Re: PID controller: dummy questions Richard Damon <Richard@Damon-Family.org> - 2020-06-27 12:34 -0400
                Re: PID controller: dummy questions DJ Delorie <dj@delorie.com> - 2020-06-27 11:51 -0400
            Re: PID controller: dummy questions Rick C <gnuarm.deletethisbit@gmail.com> - 2020-06-26 23:06 -0700
              Re: PID controller: dummy questions Paul Rubin <no.email@nospam.invalid> - 2020-06-26 23:18 -0700
                Re: PID controller: dummy questions Rick C <gnuarm.deletethisbit@gmail.com> - 2020-06-27 00:23 -0700
            Re: PID controller: dummy questions Tauno Voipio <tauno.voipio@notused.fi.invalid> - 2020-06-27 10:28 +0300
            Re: PID controller: dummy questions Richard Damon <Richard@Damon-Family.org> - 2020-06-27 18:13 -0400
    Re: PID controller: dummy questions Hans-Bernhard Bröker <HBBroeker@t-online.de> - 2020-06-26 22:30 +0200
      Re: PID controller: dummy questions Phil Martel <pomartel@comcast.net> - 2020-06-28 13:10 -0400

csiph-web