Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1175934

Re: [PATCH 2/2] ARM: DTS: am437x-sk-evm: Switch using simple-audio-card for audio support

Show all headers | View raw

[Multipart message — attachments visible in raw view] - view raw

On Thu, Jul 02, 2015 at 02:58:06PM +0300, Peter Ujfalusi wrote:
> The sound support consist only Headset output on the board and can be
> handled by "simple-audio-card"
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>

Still works fine:

Tested-by: Felipe Balbi <balbi@ti.com>

one question though, should Line In be listed below ? Also, unrelated to
$subject, but if I wait for a few seconds between runs of speaker-test
(iow, if I allow mcasp to idle) then I hear a slight chopping sound when
starting, perhaps we're unmuting too early ?

> ---
>  arch/arm/boot/dts/am437x-sk-evm.dts | 30 ++++++++++++++++++++++--------
>  1 file changed, 22 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
> index b5de6b0d622c..e09216cb14df 100644
> --- a/arch/arm/boot/dts/am437x-sk-evm.dts
> +++ b/arch/arm/boot/dts/am437x-sk-evm.dts
> @@ -32,14 +32,26 @@
>  	};
>  
>  	sound {
> -		compatible = "ti,da830-evm-audio";
> -		ti,model = "AM437x-SK-EVM";
> -		ti,audio-codec = <&tlv320aic3106>;
> -		ti,mcasp-controller = <&mcasp1>;
> -		ti,codec-clock-rate = <24000000>;
> -		ti,audio-routing =
> -			"Headphone Jack",       "HPLOUT",
> -			"Headphone Jack",       "HPROUT";
> +		compatible = "simple-audio-card";
> +		simple-audio-card,name = "AM437x-SK-EVM";
> +		simple-audio-card,widgets =
> +			"Headphone", "Headphone Jack";
> +		simple-audio-card,routing =
> +			"Headphone Jack",	"HPLOUT",
> +			"Headphone Jack",	"HPROUT";
> +		simple-audio-card,format = "dsp_b";
> +		simple-audio-card,bitclock-master = <&sound_master>;
> +		simple-audio-card,frame-master = <&sound_master>;
> +		simple-audio-card,bitclock-inversion;
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&mcasp1>;
> +		};
> +
> +		sound_master: simple-audio-card,codec {
> +			sound-dai = <&tlv320aic3106>;
> +			system-clock-frequency = <24000000>;
> +		};
>  	};
>  
>  	matrix_keypad: matrix_keypad@0 {
> @@ -489,6 +501,7 @@
>  	};
>  
>  	tlv320aic3106: tlv320aic3106@1b {
> +		#sound-dai-cells = <0>;
>  		compatible = "ti,tlv320aic3106";
>  		reg = <0x1b>;
>  		status = "okay";
> @@ -649,6 +662,7 @@
>  };
>  
>  &mcasp1 {
> +	#sound-dai-cells = <0>;
>  	pinctrl-names = "default", "sleep";
>  	pinctrl-0 = <&mcasp1_pins>;
>  	pinctrl-1 = <&mcasp1_pins_sleep>;
> -- 
> 2.4.5
> 

-- 
balbi

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

Re: [PATCH 2/2] ARM: DTS: am437x-sk-evm: Switch using  simple-audio-card for audio support Felipe Balbi <balbi@ti.com> - 2015-07-02 14:30 +0200
  Re: [PATCH 2/2] ARM: DTS: am437x-sk-evm: Switch using  simple-audio-card for audio support Peter Ujfalusi <peter.ujfalusi@ti.com> - 2015-07-02 15:00 +0200
    Re: [PATCH 2/2] ARM: DTS: am437x-sk-evm: Switch using  simple-audio-card for audio support Felipe Balbi <balbi@ti.com> - 2015-07-02 15:30 +0200

csiph-web