Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > comp.soft-sys.math.mathematica > #4430
| From | Oliver Ruebenkoenig <ruebenko@wolfram.com> |
|---|---|
| Newsgroups | comp.soft-sys.math.mathematica |
| Subject | Re: lattice-Boltzmann method for 2D cfd |
| Date | 2011-08-16 05:29 +0000 |
| Organization | Steven M. Christensen and Associates, Inc and MathTensor, Inc. |
| Message-ID | <j2cv75$hh0$1@smc.vnet.net> (permalink) |
| References | <201108141213.IAA03361@smc.vnet.net> |
Hello Fonseca, On Sun, 14 Aug 2011, Fonseca wrote: > Hi, > > I'll need to simulate transient flow of free surface water on a > prismatic channel. > > I'm looking for models on both 1D and 2D. There are a lot of free and > commercial software available that do exactly what I want: the time > simulation of the transient effect (basically a water wave) along the > channel and with the possibility of interconnecting different channels > in a network system. Nevertheless, I want to really learn how it's > done, and, based on my personal experience, the only way to really > learn the works of such a system, is to do it our self (at least the > basic part of it -> no intention on building a complete cfd software > from scratch, or at least, not for now...). > > I've some experience with the simulation of pipe water hammer, and the > 1D free surface solution is basically equivalent. > > But this time I wanted to try something different. I've been looking > into the different possibilities, and was wondering if a lattice- > Boltzmann method was a good start (in 2D). For what I've seen, it's > not too hard to program (for a free surface system, seems much simpler > to program than a FEM or a FVM), and, from what I could understand, it > can correctly simulate my scenario.. > > I was wondering if any of you in this forum has any opinion on the > subject, that can guide me in the task, or knows of a simple piece of > code on the subject, from which I could analyze the basic structure. > If you do implement that via the LBM, I'd be very interested to see it. Unfortunately, I have no experience with the LBM so I can not comment on how difficult it would be to implement the LBM. A while I did implement a Navier-Stokes solver with a Level-Set method (FEM based and I think I have some FDM stuff as well) - and yes, it was a lot of work but also a lot of fun. If you are interested in that I can send some links. Oliver > thank you, > P. Fonseca > > >
Back to comp.soft-sys.math.mathematica | Previous | Next | Find similar | Unroll thread
Re: lattice-Boltzmann method for 2D cfd Oliver Ruebenkoenig <ruebenko@wolfram.com> - 2011-08-16 05:29 +0000
csiph-web