Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > comp.soft-sys.math.mathematica > #4430

Re: lattice-Boltzmann method for 2D cfd

From Oliver Ruebenkoenig <ruebenko@wolfram.com>
Newsgroups comp.soft-sys.math.mathematica
Subject Re: lattice-Boltzmann method for 2D cfd
Date 2011-08-16 05:29 +0000
Organization Steven M. Christensen and Associates, Inc and MathTensor, Inc.
Message-ID <j2cv75$hh0$1@smc.vnet.net> (permalink)
References <201108141213.IAA03361@smc.vnet.net>

Show all headers | View raw


Hello Fonseca,

On Sun, 14 Aug 2011, Fonseca wrote:

> Hi,
>
> I'll need to simulate transient flow of free surface water on a
> prismatic channel.
>
> I'm looking for models on both 1D and 2D. There are a lot of free and
> commercial software available that do exactly what I want: the time
> simulation of the transient effect (basically a water wave) along the
> channel and with the possibility of interconnecting different channels
> in a network system. Nevertheless, I want to really learn how it's
> done, and, based on my personal experience, the only way to really
> learn the works of such a system, is to do it our self (at least the
> basic part of it -> no intention on building a complete cfd software
> from scratch, or at least, not for now...).
>
> I've some experience with the simulation of pipe water hammer, and the
> 1D free surface solution is basically equivalent.
>
> But this time I wanted to try something different. I've been looking
> into the different possibilities, and was wondering if a lattice-
> Boltzmann method was a good start (in 2D). For what I've seen, it's
> not too hard to program (for a free surface system, seems much simpler
> to program than a FEM or a FVM), and, from what I could understand, it
> can correctly simulate my scenario..
>
> I was wondering if any of you in this forum has any opinion on the
> subject, that can guide me in the task, or knows of a simple piece of
> code on the subject, from which I could analyze the basic structure.
>

If you do implement that via the LBM, I'd be very interested to see it. 
Unfortunately, I have no experience with the LBM so I can not comment on 
how difficult it would be to implement the LBM.

A while I did implement a Navier-Stokes solver with a Level-Set method 
(FEM based and I think I have some FDM stuff as well) - and yes, it was a 
lot of work but also a lot of fun. If you are interested in that I can 
send some links.

Oliver


> thank you,
> P. Fonseca
>
>
>

Back to comp.soft-sys.math.mathematica | Previous | Next | Find similar | Unroll thread


Thread

Re: lattice-Boltzmann method for 2D cfd Oliver Ruebenkoenig <ruebenko@wolfram.com> - 2011-08-16 05:29 +0000

csiph-web