Re: How do you use the "at" command?

From	Robert Heller <heller@deepsoft.com>
Organization	Deepwoods Software
Subject	Re: How do you use the "at" command?
References	(2 earlier) <A_2dnXPatJUZhb7SnZ2dnUVZ_vadnZ2d@posted.localnet> <18vbv8xot6.ln2@goaway.wombat.san-francisco.ca.us> <jg05om$eto$1@dont-email.me> <pJGdnffTdKSEeL7SnZ2dnUVZ_gadnZ2d@posted.localnet> <jg1phd$mmh$1@dont-email.me>
Newsgroups	comp.os.linux.misc
Message-ID	<ZcCdnStHd9pDV7nSnZ2dnUVZ_vadnZ2d@posted.localnet> (permalink)
Date	2012-01-28 22:28 -0600

Show all headers | View raw

At Sat, 28 Jan 2012 13:32:38 -0800 Todd <Todd@invalid.invalid> wrote:

> 
> On 01/28/2012 04:07 AM, Robert Heller wrote:
> > It sounds like you need UPSes (and no, I don't mean the people with the
> > brown trucks).  APC makes a line of linux friendly UPSes and apcupsd is
> > available in the EPel repository.
> 
> I put APC Smart UPS on all my servers.  I install apcupsd to
> monitor them.  Problem is that they run down eventually
> when the power goes out.  Everything restarts beautifully when
> the power comes back on.  Although the guys in the brown

If you have UPSes and are using apcupsd, it should be performing clean
shutdowns with there is a power failure.  This should avoid the need for
fscks on boot up.

> short pants with the brown trucks get a little annoyed  having
> to wait around.  They protest that they are delivery guys and not
> power guys.  :-)
> 
> -T
>                                                    

-- 
Robert Heller             -- 978-544-6933 / heller@deepsoft.com
Deepwoods Software        -- http://www.deepsoft.com/
()  ascii ribbon campaign -- against html e-mail
/\  www.asciiribbon.org   -- against proprietary attachments

Thread

How do you use the "at" command? Todd <Todd@invalid.invalid> - 2012-01-27 10:16 -0800
  Re: How do you use the "at" command? Lew Pitcher <lpitcher@teksavvy.com> - 2012-01-27 13:43 -0500
    Re: How do you use the "at" command? Lew Pitcher <lpitcher@teksavvy.com> - 2012-01-27 13:45 -0500
      Re: How do you use the "at" command? Robert Heller <heller@deepsoft.com> - 2012-01-27 15:34 -0600
        Re: How do you use the "at" command? Todd <Todd@invalid.invalid> - 2012-01-27 22:41 -0800
          Re: How do you use the "at" command? Loki Harfagr <l0k1@thedarkdesign.free.fr.INVALID> - 2012-01-28 10:27 +0000
            Re: How do you use the "at" command? Aragorn <stryder@telenet.be.invalid> - 2012-01-28 19:05 +0100
              Re: How do you use the "at" command? Keith Keller <kkeller-usenet@wombat.san-francisco.ca.us> - 2012-01-28 10:26 -0800
              Re: How do you use the "at" command? Loki Harfagr <l0k1@thedarkdesign.free.fr.INVALID> - 2012-01-30 08:51 +0000
                Re: How do you use the "at" command? Aragorn <stryder@telenet.be.invalid> - 2012-01-31 03:16 +0100
                Re: How do you use the "at" command? Aragorn <stryder@telenet.be.invalid> - 2012-02-01 00:24 +0100
                Re: How do you use the "at" command? Robert Heller <heller@deepsoft.com> - 2012-01-31 17:55 -0600
                Re: How do you use the "at" command? Aragorn <stryder@telenet.be.invalid> - 2012-02-01 02:01 +0100
                Re: How do you use the "at" command? "David W. Hodgins" <dwhodgins@nomail.afraid.org> - 2012-01-31 21:36 -0500
                Re: How do you use the "at" command? "David W. Hodgins" <dwhodgins@nomail.afraid.org> - 2012-01-31 21:25 -0500
                Re: How do you use the "at" command? Aragorn <stryder@telenet.be.invalid> - 2012-02-01 04:57 +0100
                Re: How do you use the "at" command? Darren Salt <news@youmustbejoking.demon.cu.invalid> - 2012-01-31 23:46 +0000
                Re: How do you use the "at" command? Aragorn <stryder@telenet.be.invalid> - 2012-02-01 02:12 +0100
  Re: How do you use the "at" command? Richard Kettlewell <rjk@greenend.org.uk> - 2012-01-27 19:10 +0000
    Re: How do you use the "at" command? Todd <Todd@invalid.invalid> - 2012-01-27 11:17 -0800
      Re: How do you use the "at" command? Robert Heller <heller@deepsoft.com> - 2012-01-27 15:34 -0600
  Re: How do you use the "at" command? unruh <unruh@invalid.ca> - 2012-01-27 20:26 +0000
    Re: How do you use the "at" command? Todd <Todd@invalid.invalid> - 2012-01-27 22:51 -0800
  Re: How do you use the "at" command? Keith Keller <kkeller-usenet@wombat.san-francisco.ca.us> - 2012-01-27 12:23 -0800
    Re: How do you use the "at" command? Robert Heller <heller@deepsoft.com> - 2012-01-27 15:35 -0600
      Re: How do you use the "at" command? Keith Keller <kkeller-usenet@wombat.san-francisco.ca.us> - 2012-01-27 17:22 -0800
        Re: How do you use the "at" command? Robert Heller <heller@deepsoft.com> - 2012-01-27 20:25 -0600
          Re: How do you use the "at" command? Todd <Todd@invalid.invalid> - 2012-01-27 22:49 -0800
            Re: How do you use the "at" command? Bit Twister <BitTwister@mouse-potato.com> - 2012-01-28 07:16 +0000
              Re: How do you use the "at" command? Todd <Todd@invalid.invalid> - 2012-01-27 23:57 -0800
        Re: How do you use the "at" command? Todd <Todd@invalid.invalid> - 2012-01-27 22:49 -0800
          Re: How do you use the "at" command? Robert Heller <heller@deepsoft.com> - 2012-01-28 06:07 -0600
            Re: How do you use the "at" command? Todd <Todd@invalid.invalid> - 2012-01-28 13:32 -0800
              Re: How do you use the "at" command? Robert Heller <heller@deepsoft.com> - 2012-01-28 22:28 -0600
                Re: How do you use the "at" command? Todd <Todd@invalid.invalid> - 2012-01-28 22:50 -0800
                Re: How do you use the "at" command? Keith Keller <kkeller-usenet@wombat.san-francisco.ca.us> - 2012-01-28 23:35 -0800
                Re: How do you use the "at" command? unruh <unruh@invalid.ca> - 2012-01-29 18:46 +0000
                Re: How do you use the "at" command? Todd <Todd@invalid.invalid> - 2012-01-29 12:03 -0800
                Re: How do you use the "at" command? Robert Heller <heller@deepsoft.com> - 2012-01-29 15:38 -0600
                Re: How do you use the "at" command? Todd <Todd@invalid.invalid> - 2012-01-29 16:58 -0800
                Re: How do you use the "at" command? unruh <unruh@invalid.ca> - 2012-01-30 01:36 +0000
                Re: How do you use the "at" command? Aragorn <stryder@telenet.be.invalid> - 2012-01-30 03:07 +0100
                Re: How do you use the "at" command? Todd <Todd@invalid.invalid> - 2012-01-29 19:21 -0800
                Re: How do you use the "at" command? Todd <Todd@invalid.invalid> - 2012-01-29 19:17 -0800
                Re: How do you use the "at" command? Todd <Todd@invalid.invalid> - 2012-01-29 11:48 -0800
                Re: How do you use the "at" command? Robert Heller <heller@deepsoft.com> - 2012-01-29 07:35 -0600
                Re: How do you use the "at" command? Aragorn <stryder@telenet.be.invalid> - 2012-01-29 20:40 +0100
          Re: How do you use the "at" command? Todd <Todd@invalid.invalid> - 2012-02-03 13:25 -0800
      Re: How do you use the "at" command? Todd <Todd@invalid.invalid> - 2012-01-27 22:45 -0800
    Re: How do you use the "at" command? Todd <Todd@invalid.invalid> - 2012-01-27 22:42 -0800

csiph-web