Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > uk.tech.broadcast > #71076

Re: TV/Radio aerial signal power levels: simple explanation needed.

From Rink <rink.hof.haalditmaarweg@planet.nl>
Newsgroups uk.tech.broadcast
Subject Re: TV/Radio aerial signal power levels: simple explanation needed.
Date 2026-11-09 15:24 +0100
Organization A noiseless patient Spider
Message-ID <11csl3i$1addb$1@dont-email.me> (permalink)
References <11at4ui$39d80$1@dont-email.me>

Show all headers | View raw


Op 16-10-2026 om 14:22 schreef David Paste:
> Hello,
> 
> Can anyone explain to me like I’m an idiot, because I’m an idiot, about 
> the signal power levels at the receiver end of a piece of coax?
> 
> (I’ve posted this in uk.tech.broadcast and uk.d-i-y)
> 
> BACKGROUND
> 
> Classic FM, for example, broadcasts from Holme Moss on 101.1 MHz with an 
> output of 250 kW (which I assume is ERP, which I sort of understand as 
> the power focussed in particular direction by it’s transmitting antenna 
> in the same way light can be focussed by glass lenses).
> 
> There is attenuation as the signal travels to me (50.31 km away as the 
> crow flies), and this attenuation follows an inverse square law, so 1/2 
> 531 096 100
> 
> so:
> 250 000 000 / 2 531 096 100
> which equals
> 0.0987714374
> 
> I assume this is in watts?
> 
> And this is the signal strength in free air at the position of my aerial 
> (half wave dipole).
> 
> Then there is about 20 metres of coax, which I believe is RG-11, which 
> according to a datasheet I found on the RS website has an attenuation of 
> 74.8 dB per 100 metres at 700 MHz.
> 
> I do not know how to work out the power loss through that 20 metres of 
> coax as I do not really understand dB, other than “it’s a comparative 
> level of power”. I’ve no idea what that means.
> 
> My radio (which is in the cellar, hence the need for an external aerial) 
> has the following details in the manual:
> 
> Sensitivity = 2.5 µV (IHF) (what is IHF?)
> 
> S/N 26 dB 2.2 µV
> 
> So it needs microvolts but how is this figure related to the watts from 
> the transmitter? Do I need to know the current in the coax?
> 
> How is the signal strength measured? Does it need a special meter, or 
> can a multimeter be used?
> 
> My radio doesn’t always get a good signal; in some weathers there is a 
> background hiss. I would like to get rid of this. I suppose an amplifier 
> at the aerial itself would be needed?
> 
> Thanks in advance for any help, and apologies for the lengthy question.
> 
> D.P.


Late at the party.

You start with 250 000 000
That is 250 MegaWatt

And J.P. Gilliver explained already that the signal is radiated in mixed 
polarization.
The 250 kW ERP is the sum of the horizontal power and the vertical power.
So if you only receive horizontal (or only vertical)
you start with 125 000

Rink

Back to uk.tech.broadcast | Previous | Next — Previous in thread | Find similar | Unroll thread


Thread

TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-16 13:22 +0100
  Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-16 14:08 +0100
    Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 16:18 +0100
      Re: TV/Radio aerial signal power levels: simple explanation needed. John Williamson <johnwilliamson@btinternet.com> - 2026-10-20 16:46 +0100
        Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 17:09 +0100
      Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-20 20:27 +0100
  Re: TV/Radio aerial signal power levels: simple explanation needed. Spike <aero.spike@mail.com> - 2026-10-17 14:16 +0000
    Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-18 03:39 +0100
      Re: TV/Radio aerial signal power levels: simple explanation needed. tony sayer <tony@bancom.co.uk> - 2026-10-18 20:57 +0100
    Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 16:23 +0100
      Re: TV/Radio aerial signal power levels: simple explanation needed. Spike <aero.spike@mail.com> - 2026-10-20 16:05 +0000
        Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 17:10 +0100
          Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-20 20:32 +0100
  Re: TV/Radio aerial signal power levels: simple explanation needed. Rink <rink.hof.haalditmaarweg@planet.nl> - 2026-11-09 15:24 +0100

csiph-web