Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]


Groups > uk.tech.broadcast > #71025

Re: TV/Radio aerial signal power levels: simple explanation needed.

From David Paste <pastedavid@gmail.com>
Newsgroups uk.tech.broadcast
Subject Re: TV/Radio aerial signal power levels: simple explanation needed.
Date 2026-10-20 16:18 +0100
Organization A noiseless patient Spider
Message-ID <11b80o9$34far$1@dont-email.me> (permalink)
References <11at4ui$39d80$1@dont-email.me> <11at7jo$3agre$1@dont-email.me>

Show all headers | View raw


On 16/10/2026 14:08, J. P. Gilliver wrote:

> Yes - Effective Radiated Power; you'd need to check the source you got
> the 250 kW figure from

Wikipedia, the page for Holme Moss Tx.


> Of course, TANSTAAFL

I’m sorry, I don’t know what that means!


> I don't quite understand your figures.

It’s supposed to be one over 50.31 km squared, with 50310 squared being 
2,531,096,100


> If you started with watts, then yes.

Just out of interest, would this be said “9.8 centiwatts” or “98 
milliwatts”? Does centi get used anywhere other than Helix shatterproof 
rulers and wine bottles?! ;)


> Could be the theoretical isotropic aerial (same in all directions of a
> sphere), but as such things don't actually exist, the half-wave dipole
> is often used (if you see "dBd" or "dBi" that means "dB relative to a
> dipole/isotropic aerial"). IIRR, the difference isn't great.

It is tuned to 100 MHz, so two elements of 75 cm, if that makes any 
difference.

Whilst I remember, do you know how big the gap between the two elements 
should be at the centre point? Mine are wire coat hangers straightened 
out with the tips bent to slot into a chocolate block connector, so they 
are only a few millimetres apart, but I’ve no idea if that makes any 
difference.


> Probably a lot less if you're talking about Classic FM's ordinary band
> II signal, which will be somewhere around 100 MHz. (You mention hiss, so
> I assume you're talking normal analogue FM reception.)

Yes, you are correct. I found the left over reel and it is:

Webro WF100 Coaxial Cable
Attenuation (d/B 100m @ 20°C) 100MHz <6.50

(from the data sheet at https://www.farnell.com/datasheets/2851701.pdf)


> (If a signal has been reduced by 80 dB, just remember it's had 8 bels
> knocked out of it!)

Thanks for the explanation!


>> the transmitter? Do I need to know the current in the coax?
> 
> If you know the nominal impedance of the input, and it is correctly
> matched to the cable and aerial used.

“It uses a TV style plug, sir”


> (I've not put that too well - ask and I'll try to improve if you don't
> get it.)
No, that’s perfectly understandable, thanks! Like lighting an object out 
of the shadows.


> Not at all: if you don't ask, you never get an answer! Hope mine are
> useful and correct; it's decades since I was actually doing this stuff!

I am very thankful for your kind response. I asked in another group and 
the replies were very on brand for that group :D

Back to uk.tech.broadcast | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread


Thread

TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-16 13:22 +0100
  Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-16 14:08 +0100
    Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 16:18 +0100
      Re: TV/Radio aerial signal power levels: simple explanation needed. John Williamson <johnwilliamson@btinternet.com> - 2026-10-20 16:46 +0100
        Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 17:09 +0100
      Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-20 20:27 +0100
  Re: TV/Radio aerial signal power levels: simple explanation needed. Spike <aero.spike@mail.com> - 2026-10-17 14:16 +0000
    Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-18 03:39 +0100
      Re: TV/Radio aerial signal power levels: simple explanation needed. tony sayer <tony@bancom.co.uk> - 2026-10-18 20:57 +0100
    Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 16:23 +0100
      Re: TV/Radio aerial signal power levels: simple explanation needed. Spike <aero.spike@mail.com> - 2026-10-20 16:05 +0000
        Re: TV/Radio aerial signal power levels: simple explanation needed. David Paste <pastedavid@gmail.com> - 2026-10-20 17:10 +0100
          Re: TV/Radio aerial signal power levels: simple explanation needed. "J. P. Gilliver" <G6JPG@255soft.uk> - 2026-10-20 20:32 +0100
  Re: TV/Radio aerial signal power levels: simple explanation needed. Rink <rink.hof.haalditmaarweg@planet.nl> - 2026-11-09 15:24 +0100

csiph-web