Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > free.3d-printing > #100

Re: spaghetti with nozzle 0.2 on p2s

Show all headers | View raw

It basically stringing. Starting at higher layers. Ahesion seems fine.

. On 5/6/26 6:03 PM, not@telling.you.invalid wrote:
>D D <karuzo@gmail.com> wrote:
>> Hi there,
>> 
>> no matter what I do, using bambu lab p2s, I get spaghetti.
>
>I guess I've been doing my own thing with 3D printing for so long
>I've missed/forgotten these terms. What's spaghetti? If you mean
>little strings of plastic are left around the part where the
>extruder jumps over gaps in the print, there should be a feature to
>slow down (or reverse?) the extruder feed and movement at the end
>of laying a line of plastic, so less oozes out when it stops. In
>the Skeinforge slicer (which probably nobody except me still uses)
>this setting was called "dwindle".
>
>To be honest I never bothered much about it and just cleaned the
>part up afterwards, which gives you something to do while watching
>that the next print started OK (I tend to do prints in batches,
>when it's good weather outside to have the window open to vent the
>ABS fumes).

Back to free.3d-printing | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

spaghetti with nozzle 0.2 on p2s D D <karuzo@gmail.com> - 2026-05-06 17:00 -0500
  Re: spaghetti with nozzle 0.2 on p2s not@telling.you.invalid (Computer Nerd Kev) - 2026-05-07 09:03 +1000
    Re: spaghetti with nozzle 0.2 on p2s Andy Burns <usenet@andyburns.uk> - 2026-05-07 09:33 +0100
    Re: spaghetti with nozzle 0.2 on p2s D D <karuzo@gmail.com> - 2026-05-07 18:51 +0000
  Re: spaghetti with nozzle 0.2 on p2s Andy Burns <usenet@andyburns.uk> - 2026-05-07 09:37 +0100
    Re: spaghetti with nozzle 0.2 on p2 scole <vintageapplemac@gmail.com> - 2026-05-07 11:29 +0000
      Re: spaghetti with nozzle 0.2 on p2 D D <karuzo@gmail.com> - 2026-05-07 18:55 +0000
    Re: spaghetti with nozzle 0.2 on p2s D D <karuzo@gmail.com> - 2026-05-07 18:54 +0000

csiph-web