Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > free.3d-printing > #96

Re: spaghetti with nozzle 0.2 on p2s

Show all headers | View raw

D D <karuzo@gmail.com> wrote:
> Hi there,
> 
> no matter what I do, using bambu lab p2s, I get spaghetti.

I guess I've been doing my own thing with 3D printing for so long
I've missed/forgotten these terms. What's spaghetti? If you mean
little strings of plastic are left around the part where the
extruder jumps over gaps in the print, there should be a feature to
slow down (or reverse?) the extruder feed and movement at the end
of laying a line of plastic, so less oozes out when it stops. In
the Skeinforge slicer (which probably nobody except me still uses)
this setting was called "dwindle".

To be honest I never bothered much about it and just cleaned the
part up afterwards, which gives you something to do while watching
that the next print started OK (I tend to do prints in batches,
when it's good weather outside to have the window open to vent the
ABS fumes).

-- 
__          __
#_ < |\| |< _#

Back to free.3d-printing | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

spaghetti with nozzle 0.2 on p2s D D <karuzo@gmail.com> - 2026-05-06 17:00 -0500
  Re: spaghetti with nozzle 0.2 on p2s not@telling.you.invalid (Computer Nerd Kev) - 2026-05-07 09:03 +1000
    Re: spaghetti with nozzle 0.2 on p2s Andy Burns <usenet@andyburns.uk> - 2026-05-07 09:33 +0100
    Re: spaghetti with nozzle 0.2 on p2s D D <karuzo@gmail.com> - 2026-05-07 18:51 +0000
  Re: spaghetti with nozzle 0.2 on p2s Andy Burns <usenet@andyburns.uk> - 2026-05-07 09:37 +0100
    Re: spaghetti with nozzle 0.2 on p2 scole <vintageapplemac@gmail.com> - 2026-05-07 11:29 +0000
      Re: spaghetti with nozzle 0.2 on p2 D D <karuzo@gmail.com> - 2026-05-07 18:55 +0000
    Re: spaghetti with nozzle 0.2 on p2s D D <karuzo@gmail.com> - 2026-05-07 18:54 +0000

csiph-web