Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > sci.physics > #529674

Re: A wrenching problem

Show key headers only | View raw

On 10/31/2015 3:04 PM, Fabian Russell wrote:
> On Sat, 31 Oct 2015 13:35:39 -0400, benj wrote:
>
>>
>> Those particular ratcheting wrenches are stamped cheapo crap with very
>> large ends that won't fit tight spaces (the spaces around nuts and bolts
>> are always tight due to Murphy's Law). There are better ones.
>>
>
> Better?  Well, let's just say that there are a variety of wrenches
> available to suit a variety of access situations.  The average mechanic,
> therefore, must invest a fortune in different tool sets to cover all,
> or most, possibilities -- if he can afford it.
>
> Furthermore, Murphy's law is not the culprit.  The reason for most
> difficult access situations is POOR DESIGN.  Most goods are not made
> to be repaired.  They are made to be discarded after a certain time
> period  and thus no thought whatsoever is usually given to providing
> a convenient access.
>
> I had to replace the oil pan on my vehicle.  The whole fscking engine
> had to be removed, at great expense, to obtain access to a $50 part.
> The same for spark plugs.  The same for fuel pumps.  Etc., etc.
> To change out a simple starter on my vehicle, I once had to piece together
> a chain of several socket extensions, including TWO universal joints,
> totaling about three feet in length so as to thread through a labyrinth
> of obstructions in order to reach the two bolts that held the goddamned
> thing.  When I walked into the auto parts emporium to get a replacement
> the clerk began to heartily laugh: "I'll bet you had a time gettin' this
> off!"

I once worked on a Caddy that required lifting the engine several inches 
off its mounts to change the damn spark plugs. If that isn't the 
pinnacle of poor design I don't know what is.

> Once, after measuring a low voltage output, I realized that I needed
> to replace the alternator on my auto.  A look around revealed the faulty
> original sitting beautifully in an unobstructed location.  I was overjoyed.
> After quickly removing two bolts I began to pull but the thing wouldn't
> budge. Looking more closely I discovered a third bolt completely buried
> in a deep ravine of steel forgings and casts.  It required many hours of
> frustration to finally free the part.

Been there, many times.

> A military fighter jet is designed for continuous maintenance and
> the design engineers give great attention to including convenient
> access as part of the overall design.  But the same is not true for
> the flood of other goods on the consumer and professional market.
>
> Good design costs $$$ and will not make it in the competitive world
> of trash goods that we know and enjoy.  As a consequence, the repairman
> always has the frustrating job of playing nimble contortionist

Very true, but a car designed for easy repair would cost so much very 
few would buy it. Who's at fault, the designers or the consumer?

-- 
dvus

Back to sci.physics | Previous | Next — Previous in thread | Next in thread | Find similar | Unroll thread

Thread

A wrenching problem Sam Wormley <swormley1@gmail.com> - 2015-10-30 21:43 -0500
  Re: A wrenching problem Fabian Russell <root@localhost.localdomain> - 2015-10-31 02:56 +0000
    Re: A wrenching problem xxein1@att.net - 2015-10-31 10:06 -0700
    Re: A wrenching problem benj <none@gmail.com> - 2015-10-31 13:35 -0400
      Re: A wrenching problem Fabian Russell <root@localhost.localdomain> - 2015-10-31 18:06 +0000
        Re: A wrenching problem jimp@specsol.spam.sux.com - 2015-10-31 19:03 +0000
          Re: A wrenching problem Fabian Russell <root@localhost.localdomain> - 2015-10-31 19:33 +0000
            Re: A wrenching problem jimp@specsol.spam.sux.com - 2015-10-31 19:50 +0000
          Re: A wrenching problem benj <none@gmail.com> - 2015-10-31 17:07 -0400
            Re: A wrenching problem Fabian Russell <root@localhost.localdomain> - 2015-10-31 22:22 +0000
              Re: A wrenching problem benj <none@gmail.com> - 2015-10-31 23:12 -0400
                Re: A wrenching problem Fabian Russell <root@localhost.localdomain> - 2015-11-01 04:04 +0000
                Re: A wrenching problem "Ross A. Finlayson" <ross.finlayson@gmail.com> - 2015-10-31 21:29 -0700
                Re: A wrenching problem Fabian Russell <root@localhost.localdomain> - 2015-11-01 06:28 +0000
                Re: A wrenching problem olli.dp3@gmail.com - 2015-10-31 23:09 -0700
                Re: A wrenching problem benj <none@gmail.com> - 2015-11-01 10:49 -0500
      Re: A wrenching problem Fabian Russell <root@localhost.localdomain> - 2015-10-31 18:26 +0000
        Re: A wrenching problem benj <none@gmail.com> - 2015-10-31 16:56 -0400
          Re: A wrenching problem Fabian Russell <root@localhost.localdomain> - 2015-10-31 21:25 +0000
          Re: A wrenching problem Fabian Russell <root@localhost.localdomain> - 2015-10-31 21:33 +0000
            Re: A wrenching problem benj <none@gmail.com> - 2015-10-31 22:56 -0400
      Re: A wrenching problem Fabian Russell <root@localhost.localdomain> - 2015-10-31 19:04 +0000
        Re: A wrenching problem benj <none@gmail.com> - 2015-10-31 17:25 -0400
        Re: A wrenching problem dvus <dven1@adelphia.net> - 2015-11-01 08:29 -0500
          Re: A wrenching problem benj <none@gmail.com> - 2015-11-01 10:21 -0500
            Re: A wrenching problem dvus <dven1@adelphia.net> - 2015-11-01 22:43 -0500
          Re: A wrenching problem R Kym Horsell <kym@kymhorsell.com> - 2015-11-01 18:48 +0000
      Re: A wrenching problem Fabian Russell <root@localhost.localdomain> - 2015-10-31 20:13 +0000

csiph-web