Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1585440 > unrolled thread
| Started by | Catalin Marinas <catalin.marinas@arm.com> |
|---|---|
| First post | 2017-02-21 16:50 +0100 |
| Last post | 2017-02-21 17:00 +0100 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: [PATCH v2] arm64: cache: Skip an unnecessary data cache clean PoU operation Catalin Marinas <catalin.marinas@arm.com> - 2017-02-21 16:50 +0100
Re: [PATCH v2] arm64: cache: Skip an unnecessary data cache clean PoU operation Will Deacon <will.deacon@arm.com> - 2017-02-21 17:00 +0100
| From | Catalin Marinas <catalin.marinas@arm.com> |
|---|---|
| Date | 2017-02-21 16:50 +0100 |
| Subject | Re: [PATCH v2] arm64: cache: Skip an unnecessary data cache clean PoU operation |
| Message-ID | <tdkRr-4uK-15@gated-at.bofh.it> |
On Wed, Feb 08, 2017 at 03:19:37PM -0600, Shanker Donthineni wrote:
> The cache management functions always do the data cache PoU
> (point of unification) operations even though it is not required
> on some systems. No need to clean data cache till PoU if all the
> cache levels below PoUIS are WT (Write-Through) caches. It causes
> a huge performance degradation when operating on a larger memory
> area, especially THP with 64K page size kernel.
>
> For each online CPU, check the need of 'dc cvau' instruction and
> update a global variable __dcache_flags. The two functions
> __flush_cache_user_range() and __clean_dcache_area_pou() are
> modified to skip an unnecessary code execution based on flags.
> It won't change the existing behavior if any one of the online
> CPU is capable of WB cache below PoUIS level.
>
> Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
[...]
> +#define CLIDR_LOUIS_SHIFT (21)
> +#define CLIDR_LOUIS_MASK (0x7)
> +#define CLIDR_LOUIS(x) (((x) >> CLIDR_LOUIS_SHIFT) & CLIDR_LOUIS_MASK)
According to the ARMv8 ARM, CLIDR_EL1 "identifies the type of cache, or
caches, that are implemented at each level and can be managed using the
architected cache maintenance instructions that operate by set/way". The
key part is "set/way" here and hence you cannot use CLIDR_EL1 and
CCSIDR_EL1 to infer whether you can skip cache maintenance by VA.
> + /* Go through all the cache level below LoUIS */
> + for (lvl = 0; lvl < louis; lvl++) {
> + csidr = cache_get_ccsidr(lvl << 1);
> + if (csidr & CCSIDR_EL1_WRITE_BACK) {
The type bits have also been deprecated in ARMv8 (we need to update the
kernel or just remove the cache topology detection entirely, leaving it
just to DT).
--
Catalin
[toc] | [next] | [standalone]
| From | Will Deacon <will.deacon@arm.com> |
|---|---|
| Date | 2017-02-21 17:00 +0100 |
| Message-ID | <tdl1a-4zS-55@gated-at.bofh.it> |
| In reply to | #1585440 |
On Tue, Feb 21, 2017 at 03:47:27PM +0000, Catalin Marinas wrote:
> On Wed, Feb 08, 2017 at 03:19:37PM -0600, Shanker Donthineni wrote:
> > The cache management functions always do the data cache PoU
> > (point of unification) operations even though it is not required
> > on some systems. No need to clean data cache till PoU if all the
> > cache levels below PoUIS are WT (Write-Through) caches. It causes
> > a huge performance degradation when operating on a larger memory
> > area, especially THP with 64K page size kernel.
> >
> > For each online CPU, check the need of 'dc cvau' instruction and
> > update a global variable __dcache_flags. The two functions
> > __flush_cache_user_range() and __clean_dcache_area_pou() are
> > modified to skip an unnecessary code execution based on flags.
> > It won't change the existing behavior if any one of the online
> > CPU is capable of WB cache below PoUIS level.
> >
> > Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
> [...]
> > +#define CLIDR_LOUIS_SHIFT (21)
> > +#define CLIDR_LOUIS_MASK (0x7)
> > +#define CLIDR_LOUIS(x) (((x) >> CLIDR_LOUIS_SHIFT) & CLIDR_LOUIS_MASK)
>
> According to the ARMv8 ARM, CLIDR_EL1 "identifies the type of cache, or
> caches, that are implemented at each level and can be managed using the
> architected cache maintenance instructions that operate by set/way". The
> key part is "set/way" here and hence you cannot use CLIDR_EL1 and
> CCSIDR_EL1 to infer whether you can skip cache maintenance by VA.
>
> > + /* Go through all the cache level below LoUIS */
> > + for (lvl = 0; lvl < louis; lvl++) {
> > + csidr = cache_get_ccsidr(lvl << 1);
> > + if (csidr & CCSIDR_EL1_WRITE_BACK) {
>
> The type bits have also been deprecated in ARMv8 (we need to update the
> kernel or just remove the cache topology detection entirely, leaving it
> just to DT).
I'll dust off the patches I have for this...
Will
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web