Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1571591 > unrolled thread

[PATCH v2 07/10] ARM: dts: STiH410-b2260: Identify the UART RTS line

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v2 07/10] ARM: dts: STiH410-b2260: Identify the UART RTS line Lee Jones <lee.jones@linaro.org> - 2017-02-01 15:40 +0100
    Re: [STLinux Kernel] [PATCH v2 07/10] ARM: dts: STiH410-b2260:  Identify the UART RTS line Peter Griffin <peter.griffin@linaro.org> - 2017-02-01 16:00 +0100

#1571591 — [PATCH v2 07/10] ARM: dts: STiH410-b2260: Identify the UART RTS line

When hardware flow-control is disabled, manual toggling of the UART's
reset line (RTS) using userland applications (e.g. stty) is not
possible, since the ASC IP does not provide this functionality in the
same was as some other IPs do.  Thus, we have to do this manually.
This patch configures the UART RTS line as a GPIO for manipulation
within the UART driver when HW flow-control is not enabled.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/stih410-b2260.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index 06b0696..fa16aba 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -63,6 +63,7 @@
 		uart0: serial@9830000 {
 			label = "LS-UART0";
 			status = "okay";
+			rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Low speed expansion connector */
-- 
2.9.3

[toc] | [next] | [standalone]

#1571632 — Re: [STLinux Kernel] [PATCH v2 07/10] ARM: dts: STiH410-b2260: Identify the UART RTS line

On Wed, 01 Feb 2017, Lee Jones wrote:

> When hardware flow-control is disabled, manual toggling of the UART's
> reset line (RTS) using userland applications (e.g. stty) is not
> possible, since the ASC IP does not provide this functionality in the
> same was as some other IPs do.  Thus, we have to do this manually.
> This patch configures the UART RTS line as a GPIO for manipulation
> within the UART driver when HW flow-control is not enabled.
> 
> Signed-off-by: Lee Jones <lee.jones@linaro.org>

Acked-by: Peter Griffin <peter.griffin@linaro.org>

> ---
>  arch/arm/boot/dts/stih410-b2260.dts | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
> index 06b0696..fa16aba 100644
> --- a/arch/arm/boot/dts/stih410-b2260.dts
> +++ b/arch/arm/boot/dts/stih410-b2260.dts
> @@ -63,6 +63,7 @@
>  		uart0: serial@9830000 {
>  			label = "LS-UART0";
>  			status = "okay";
> +			rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
>  		};
>  
>  		/* Low speed expansion connector */

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web