[PATCH v2 07/10] ARM: dts: STiH410-b2260: Identify the UART RTS line

From	Lee Jones <lee.jones@linaro.org>
Newsgroups	linux.kernel
Subject	[PATCH v2 07/10] ARM: dts: STiH410-b2260: Identify the UART RTS line
Date	2017-02-01 15:40 +0100
Message-ID	<t64eJ-77f-11@gated-at.bofh.it> (permalink)
References	<t64eJ-77f-5@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

When hardware flow-control is disabled, manual toggling of the UART's
reset line (RTS) using userland applications (e.g. stty) is not
possible, since the ASC IP does not provide this functionality in the
same was as some other IPs do.  Thus, we have to do this manually.
This patch configures the UART RTS line as a GPIO for manipulation
within the UART driver when HW flow-control is not enabled.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/stih410-b2260.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index 06b0696..fa16aba 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -63,6 +63,7 @@
 		uart0: serial@9830000 {
 			label = "LS-UART0";
 			status = "okay";
+			rts-gpios = <&pio17 3 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Low speed expansion connector */
-- 
2.9.3

Back to linux.kernel | Previous | Next — Next in thread | Find similar | Unroll thread

Thread

[PATCH v2 07/10] ARM: dts: STiH410-b2260: Identify the UART RTS line Lee Jones <lee.jones@linaro.org> - 2017-02-01 15:40 +0100
  Re: [STLinux Kernel] [PATCH v2 07/10] ARM: dts: STiH410-b2260:  Identify the UART RTS line Peter Griffin <peter.griffin@linaro.org> - 2017-02-01 16:00 +0100

csiph-web