Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1562559 > unrolled thread

[PATCH v3 0/3] mmc: mediatek: Use data tune for CMD line tune

Started byYong Mao <yong.mao@mediatek.com>
First post2017-01-19 11:20 +0100
Last post2017-01-20 09:30 +0100
Articles 11 — 5 participants

Back to article view | Back to linux.kernel

Contents

  [PATCH v3 0/3] mmc: mediatek: Use data tune for CMD line tune  Yong Mao <yong.mao@mediatek.com> - 2017-01-19 11:20 +0100
    [PATCH v3 2/3] dts: mediatek: configure some fixed mmc parameters Yong Mao <yong.mao@mediatek.com> - 2017-01-19 11:20 +0100
      Re: [PATCH v3 2/3] dts: mediatek: configure some fixed mmc parameters Ulf Hansson <ulf.hansson@linaro.org> - 2017-01-20 09:10 +0100
        Re: [PATCH v3 2/3] dts: mediatek: configure some fixed mmc parameters Matthias Brugger <matthias.bgg@gmail.com> - 2017-01-24 11:40 +0100
    [PATCH v3 1/3] mmc: dt-bindings: update Mediatek MMC bindings Yong Mao <yong.mao@mediatek.com> - 2017-01-19 11:30 +0100
      Re: [PATCH v3 1/3] mmc: dt-bindings: update Mediatek MMC bindings Daniel Kurtz <djkurtz@chromium.org> - 2017-01-20 08:50 +0100
      Re: [PATCH v3 1/3] mmc: dt-bindings: update Mediatek MMC bindings Ulf Hansson <ulf.hansson@linaro.org> - 2017-01-20 09:10 +0100
    [PATCH v3 3/3] mmc: mediatek: Use data tune for CMD line tune Yong Mao <yong.mao@mediatek.com> - 2017-01-19 11:30 +0100
      Re: [PATCH v3 3/3] mmc: mediatek: Use data tune for CMD line tune kbuild test robot <lkp@intel.com> - 2017-01-20 05:50 +0100
      [PATCH] mmc: mediatek: fix semicolon.cocci warnings kbuild test robot <lkp@intel.com> - 2017-01-20 06:00 +0100
      Re: [PATCH v3 3/3] mmc: mediatek: Use data tune for CMD line tune Ulf Hansson <ulf.hansson@linaro.org> - 2017-01-20 09:30 +0100

#1562559 — [PATCH v3 0/3] mmc: mediatek: Use data tune for CMD line tune

FromYong Mao <yong.mao@mediatek.com>
Date2017-01-19 11:20 +0100
Subject[PATCH v3 0/3] mmc: mediatek: Use data tune for CMD line tune
Message-ID<t1hYZ-cB-5@gated-at.bofh.it>
yong mao (3):
  mmc: dt-bindings: update Mediatek MMC bindings
  dts: mediatek: configure some fixed mmc parameters
  mmc: mediatek: Use data tune for CMD line tune

 Documentation/devicetree/bindings/mmc/mtk-sd.txt |   9 ++
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts      |   3 +
 drivers/mmc/host/mtk-sd.c                        | 170 ++++++++++++++++++++---
 3 files changed, 165 insertions(+), 17 deletions(-)

-- 
1.8.1.1.dirty

[toc] | [next] | [standalone]

#1562563 — [PATCH v3 2/3] dts: mediatek: configure some fixed mmc parameters

FromYong Mao <yong.mao@mediatek.com>
Date2017-01-19 11:20 +0100
Subject[PATCH v3 2/3] dts: mediatek: configure some fixed mmc parameters
Message-ID<t1hZ0-cB-13@gated-at.bofh.it>
In reply to#1562559
From: yong mao <yong.mao@mediatek.com>

configure some fixed mmc parameters

Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts |    3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 0ecaad4..403705e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -134,6 +134,9 @@
 	bus-width = <8>;
 	max-frequency = <50000000>;
 	cap-mmc-highspeed;
+	mtk-hs200-cmd-int-delay=<26>;
+	mtk-hs400-cmd-int-delay=<14>;
+	mtk-hs400-cmd-resp-sel=<0>; /* 0:rising, 1:falling */
 	vmmc-supply = <&mt6397_vemc_3v3_reg>;
 	vqmmc-supply = <&mt6397_vio18_reg>;
 	non-removable;
-- 
1.7.9.5

[toc] | [prev] | [next] | [standalone]

#1563357 — Re: [PATCH v3 2/3] dts: mediatek: configure some fixed mmc parameters

FromUlf Hansson <ulf.hansson@linaro.org>
Date2017-01-20 09:10 +0100
SubjectRe: [PATCH v3 2/3] dts: mediatek: configure some fixed mmc parameters
Message-ID<t1CqJ-4LU-9@gated-at.bofh.it>
In reply to#1562563
On 19 January 2017 at 11:19, Yong Mao <yong.mao@mediatek.com> wrote:
> From: yong mao <yong.mao@mediatek.com>
>
> configure some fixed mmc parameters
>
> Signed-off-by: Yong Mao <yong.mao@mediatek.com>
> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>

Please change the prefix of the commit message header to "ARM64: dts: mt8173:".

Also make sure you send this to the ARM mailing list as well.

In general, I think it's better DTS changes go via the ARM SoC tree,
but I can pick it up if it's trivial and I get an ack from the SoC
maintainer.

> ---
>  arch/arm64/boot/dts/mediatek/mt8173-evb.dts |    3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> index 0ecaad4..403705e 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> @@ -134,6 +134,9 @@
>         bus-width = <8>;
>         max-frequency = <50000000>;
>         cap-mmc-highspeed;
> +       mtk-hs200-cmd-int-delay=<26>;
> +       mtk-hs400-cmd-int-delay=<14>;
> +       mtk-hs400-cmd-resp-sel=<0>; /* 0:rising, 1:falling */
>         vmmc-supply = <&mt6397_vemc_3v3_reg>;
>         vqmmc-supply = <&mt6397_vio18_reg>;
>         non-removable;
> --
> 1.7.9.5
>

Kind regards
Uffe

[toc] | [prev] | [next] | [standalone]

#1565774 — Re: [PATCH v3 2/3] dts: mediatek: configure some fixed mmc parameters

FromMatthias Brugger <matthias.bgg@gmail.com>
Date2017-01-24 11:40 +0100
SubjectRe: [PATCH v3 2/3] dts: mediatek: configure some fixed mmc parameters
Message-ID<t36G6-383-9@gated-at.bofh.it>
In reply to#1563357
Hi Ulf,

On 01/20/2017 08:59 AM, Ulf Hansson wrote:
> On 19 January 2017 at 11:19, Yong Mao <yong.mao@mediatek.com> wrote:
>> From: yong mao <yong.mao@mediatek.com>
>>
>> configure some fixed mmc parameters
>>
>> Signed-off-by: Yong Mao <yong.mao@mediatek.com>
>> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
>
> Please change the prefix of the commit message header to "ARM64: dts: mt8173:".
>
> Also make sure you send this to the ARM mailing list as well.
>
> In general, I think it's better DTS changes go via the ARM SoC tree,
> but I can pick it up if it's trivial and I get an ack from the SoC
> maintainer.
>

I can take them through my tree, let's wait at Rob's opinion of v4.

Regards,
Matthias

>> ---
>>  arch/arm64/boot/dts/mediatek/mt8173-evb.dts |    3 +++
>>  1 file changed, 3 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
>> index 0ecaad4..403705e 100644
>> --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
>> +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
>> @@ -134,6 +134,9 @@
>>         bus-width = <8>;
>>         max-frequency = <50000000>;
>>         cap-mmc-highspeed;
>> +       mtk-hs200-cmd-int-delay=<26>;
>> +       mtk-hs400-cmd-int-delay=<14>;
>> +       mtk-hs400-cmd-resp-sel=<0>; /* 0:rising, 1:falling */
>>         vmmc-supply = <&mt6397_vemc_3v3_reg>;
>>         vqmmc-supply = <&mt6397_vio18_reg>;
>>         non-removable;
>> --
>> 1.7.9.5
>>
>
> Kind regards
> Uffe
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
>

[toc] | [prev] | [next] | [standalone]

#1562569 — [PATCH v3 1/3] mmc: dt-bindings: update Mediatek MMC bindings

FromYong Mao <yong.mao@mediatek.com>
Date2017-01-19 11:30 +0100
Subject[PATCH v3 1/3] mmc: dt-bindings: update Mediatek MMC bindings
Message-ID<t1i8F-jB-11@gated-at.bofh.it>
In reply to#1562559
From: yong mao <yong.mao@mediatek.com>

Add description for mtk-hs200-cmd-int-delay
Add description for mtk-hs400-cmd-int-delay
Add description for mtk-hs400-cmd-resp-sel

Signed-off-by: Yong Mao <yong.mao@mediatek.com>
---
 Documentation/devicetree/bindings/mmc/mtk-sd.txt |    9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
index 0120c7f..149f472 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
@@ -21,6 +21,12 @@ Optional properties:
 - assigned-clocks: PLL of the source clock
 - assigned-clock-parents: parent of source clock, used for HS400 mode to get 400Mhz source clock
 - hs400-ds-delay: HS400 DS delay setting
+- mtk-hs200-cmd-int-delay: HS200 command internal delay setting.
+			   The value is an integer from 0 to 31
+- mtk-hs400-cmd-int-delay: HS400 command internal delay setting
+			   The value is an integer from 0 to 31
+- mtk-hs400-cmd-resp-sel:  HS400 command response sample selection
+			   The value is an integer from 0 to 1
 
 Examples:
 mmc0: mmc@11230000 {
@@ -38,4 +44,7 @@ mmc0: mmc@11230000 {
 	assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
 	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
 	hs400-ds-delay = <0x14015>;
+	mtk-hs200-cmd-int-delay = <26>;
+	mtk-hs400-cmd-int-delay = <14>;
+	mtk-hs400-cmd-resp-sel = <0>; /* 0: rising, 1: falling */
 };
-- 
1.7.9.5

[toc] | [prev] | [next] | [standalone]

#1563344 — Re: [PATCH v3 1/3] mmc: dt-bindings: update Mediatek MMC bindings

FromDaniel Kurtz <djkurtz@chromium.org>
Date2017-01-20 08:50 +0100
SubjectRe: [PATCH v3 1/3] mmc: dt-bindings: update Mediatek MMC bindings
Message-ID<t1C7n-4pX-11@gated-at.bofh.it>
In reply to#1562569
On Thu, Jan 19, 2017 at 6:19 PM, Yong Mao <yong.mao@mediatek.com> wrote:
>
> From: yong mao <yong.mao@mediatek.com>
>
> Add description for mtk-hs200-cmd-int-delay
> Add description for mtk-hs400-cmd-int-delay
> Add description for mtk-hs400-cmd-resp-sel
>
> Signed-off-by: Yong Mao <yong.mao@mediatek.com>
> ---
>  Documentation/devicetree/bindings/mmc/mtk-sd.txt |    9 +++++++++
>  1 file changed, 9 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> index 0120c7f..149f472 100644
> --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> @@ -21,6 +21,12 @@ Optional properties:
>  - assigned-clocks: PLL of the source clock
>  - assigned-clock-parents: parent of source clock, used for HS400 mode to get 400Mhz source clock
>  - hs400-ds-delay: HS400 DS delay setting
> +- mtk-hs200-cmd-int-delay: HS200 command internal delay setting.
> +                          The value is an integer from 0 to 31
> +- mtk-hs400-cmd-int-delay: HS400 command internal delay setting
> +                          The value is an integer from 0 to 31

I think last time Rob meant that you should add a vendor prefixes like this:
  mediatek,hs200-cmd-int-delay

> +- mtk-hs400-cmd-resp-sel:  HS400 command response sample selection
> +                          The value is an integer from 0 to 1

Last time Rob stated this looks like a boolean, and to state that and
make the default the more common case.

So, this could be something like:

  mediatek,hs200-cmd-resp-sample-rising: A boolean.
      If present, HS400 command responses are sampled on rising edges.
      If not present, HS400 command responses are sampled on falling edges.


>
>  Examples:
>  mmc0: mmc@11230000 {
> @@ -38,4 +44,7 @@ mmc0: mmc@11230000 {
>         assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
>         assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
>         hs400-ds-delay = <0x14015>;
> +       mtk-hs200-cmd-int-delay = <26>;
> +       mtk-hs400-cmd-int-delay = <14>;
> +       mtk-hs400-cmd-resp-sel = <0>; /* 0: rising, 1: falling */
>  };
> --
> 1.7.9.5
>

[toc] | [prev] | [next] | [standalone]

#1563356 — Re: [PATCH v3 1/3] mmc: dt-bindings: update Mediatek MMC bindings

FromUlf Hansson <ulf.hansson@linaro.org>
Date2017-01-20 09:10 +0100
SubjectRe: [PATCH v3 1/3] mmc: dt-bindings: update Mediatek MMC bindings
Message-ID<t1CqJ-4LU-7@gated-at.bofh.it>
In reply to#1562569
+devicetree, Rob

On 19 January 2017 at 11:19, Yong Mao <yong.mao@mediatek.com> wrote:
> From: yong mao <yong.mao@mediatek.com>
>
> Add description for mtk-hs200-cmd-int-delay
> Add description for mtk-hs400-cmd-int-delay
> Add description for mtk-hs400-cmd-resp-sel
>
> Signed-off-by: Yong Mao <yong.mao@mediatek.com>
> ---
>  Documentation/devicetree/bindings/mmc/mtk-sd.txt |    9 +++++++++
>  1 file changed, 9 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> index 0120c7f..149f472 100644
> --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> @@ -21,6 +21,12 @@ Optional properties:
>  - assigned-clocks: PLL of the source clock
>  - assigned-clock-parents: parent of source clock, used for HS400 mode to get 400Mhz source clock
>  - hs400-ds-delay: HS400 DS delay setting
> +- mtk-hs200-cmd-int-delay: HS200 command internal delay setting.
> +                          The value is an integer from 0 to 31

Please change to:

mediatek,hs200-cmd-delay

... and if there is a unit, like ns or us, please add that a suffix.

> +- mtk-hs400-cmd-int-delay: HS400 command internal delay setting
> +                          The value is an integer from 0 to 31

mediatek,hs400-cmd-delay and add unit if applicable.

> +- mtk-hs400-cmd-resp-sel:  HS400 command response sample selection
> +                          The value is an integer from 0 to 1

mediatek,hs400-cmd-resp-sel

And make it a boolean value instead!

>
>  Examples:
>  mmc0: mmc@11230000 {
> @@ -38,4 +44,7 @@ mmc0: mmc@11230000 {
>         assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
>         assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
>         hs400-ds-delay = <0x14015>;
> +       mtk-hs200-cmd-int-delay = <26>;
> +       mtk-hs400-cmd-int-delay = <14>;
> +       mtk-hs400-cmd-resp-sel = <0>; /* 0: rising, 1: falling */

The rising/falling information belongs in description of the binding a
few lines above. Please move it there.

>  };
> --
> 1.7.9.5
>

Kind regards
Uffe

[toc] | [prev] | [next] | [standalone]

#1562577 — [PATCH v3 3/3] mmc: mediatek: Use data tune for CMD line tune

FromYong Mao <yong.mao@mediatek.com>
Date2017-01-19 11:30 +0100
Subject[PATCH v3 3/3] mmc: mediatek: Use data tune for CMD line tune
Message-ID<t1i8G-jB-27@gated-at.bofh.it>
In reply to#1562559
From: yong mao <yong.mao@mediatek.com>

If we don't select a set of better parameters for our emmc host,
It may easily occur CMD response CRC error. And also it may cause
cannot boot up issue.

Fot getting a set of better parameters, our emmc host supports
data tune mechanism.Therefore, our emmc driver also should change
to use data tune for CMD line.

Because our emmc host use the different clock source to sample the
CMD signal between HS200 and HS400 mode, the parameters are also
different between these two modes.
Separate cmd internal delay for HS200/HS400 mode.

This change can fix "System can not boot up" issue.

Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
 drivers/mmc/host/mtk-sd.c |  170 ++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 153 insertions(+), 17 deletions(-)

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 80ba034..b4e1c43 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -75,6 +75,7 @@
 #define MSDC_PATCH_BIT1  0xb4
 #define MSDC_PAD_TUNE    0xec
 #define PAD_DS_TUNE      0x188
+#define PAD_CMD_TUNE     0x18c
 #define EMMC50_CFG0      0x208
 
 /*--------------------------------------------------------------------------*/
@@ -210,13 +211,18 @@
 #define MSDC_PATCH_BIT_SPCPUSH    (0x1 << 29)	/* RW */
 #define MSDC_PATCH_BIT_DECRCTMO   (0x1 << 30)	/* RW */
 
+#define MSDC_PAD_TUNE_DATWRDLY	  (0x1f <<  0)	/* RW */
 #define MSDC_PAD_TUNE_DATRRDLY	  (0x1f <<  8)	/* RW */
 #define MSDC_PAD_TUNE_CMDRDLY	  (0x1f << 16)  /* RW */
+#define MSDC_PAD_TUNE_CMDRRDLY	  (0x1f << 22)	/* RW */
+#define MSDC_PAD_TUNE_CLKTDLY	  (0x1f << 27)  /* RW */
 
 #define PAD_DS_TUNE_DLY1	  (0x1f << 2)   /* RW */
 #define PAD_DS_TUNE_DLY2	  (0x1f << 7)   /* RW */
 #define PAD_DS_TUNE_DLY3	  (0x1f << 12)  /* RW */
 
+#define PAD_CMD_TUNE_RX_DLY3	  (0x1f << 1)  /* RW */
+
 #define EMMC50_CFG_PADCMD_LATCHCK (0x1 << 0)   /* RW */
 #define EMMC50_CFG_CRCSTS_EDGE    (0x1 << 3)   /* RW */
 #define EMMC50_CFG_CFCSTS_SEL     (0x1 << 4)   /* RW */
@@ -284,12 +290,14 @@ struct msdc_save_para {
 	u32 patch_bit0;
 	u32 patch_bit1;
 	u32 pad_ds_tune;
+	u32 pad_cmd_tune;
 	u32 emmc50_cfg0;
 };
 
 struct msdc_tune_para {
 	u32 iocon;
 	u32 pad_tune;
+	u32 pad_cmd_tune;
 };
 
 struct msdc_delay_phase {
@@ -331,6 +339,9 @@ struct msdc_host {
 	unsigned char timing;
 	bool vqmmc_enabled;
 	u32 hs400_ds_delay;
+	u32 hs200_cmd_int_delay; /* cmd internal delay for HS200/SDR104 */
+	u32 hs400_cmd_int_delay; /* cmd internal delay for HS400 */
+	u32 hs400_cmd_resp_sel;  /* cmd response sample selection for HS400 */
 	bool hs400_mode;	/* current eMMC will run at hs400 mode */
 	struct msdc_save_para save_para; /* used when gate HCLK */
 	struct msdc_tune_para def_tune_para; /* default tune setting */
@@ -600,8 +611,14 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
 	} else {
 		writel(host->saved_tune_para.iocon, host->base + MSDC_IOCON);
 		writel(host->saved_tune_para.pad_tune, host->base + MSDC_PAD_TUNE);
+		writel(host->saved_tune_para.pad_cmd_tune,
+		       host->base + PAD_CMD_TUNE);
 	}
 
+	if (timing == MMC_TIMING_MMC_HS400)
+		sdr_set_field(host->base + PAD_CMD_TUNE,
+			      MSDC_PAD_TUNE_CMDRRDLY,
+			      host->hs400_cmd_int_delay);
 	dev_dbg(host->dev, "sclk: %d, timing: %d\n", host->sclk, timing);
 }
 
@@ -1302,7 +1319,7 @@ static struct msdc_delay_phase get_best_delay(struct msdc_host *host, u32 delay)
 			len_final = len;
 		}
 		start += len ? len : 1;
-		if (len >= 8 && start_final < 4)
+		if (len >= 12 && start_final < 4)
 			break;
 	}
 
@@ -1325,36 +1342,67 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
 	struct msdc_host *host = mmc_priv(mmc);
 	u32 rise_delay = 0, fall_delay = 0;
 	struct msdc_delay_phase final_rise_delay, final_fall_delay = { 0,};
+	struct msdc_delay_phase internal_delay_phase;
 	u8 final_delay, final_maxlen;
+	u32 internal_delay = 0;
 	int cmd_err;
-	int i;
+	int i, j;
+
+	if (mmc->ios.timing == MMC_TIMING_MMC_HS200 ||
+	    mmc->ios.timing == MMC_TIMING_UHS_SDR104)
+		sdr_set_field(host->base + MSDC_PAD_TUNE,
+			      MSDC_PAD_TUNE_CMDRRDLY,
+			      host->hs200_cmd_int_delay);
 
 	sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
 	for (i = 0 ; i < PAD_DELAY_MAX; i++) {
 		sdr_set_field(host->base + MSDC_PAD_TUNE,
 			      MSDC_PAD_TUNE_CMDRDLY, i);
-		mmc_send_tuning(mmc, opcode, &cmd_err);
-		if (!cmd_err)
-			rise_delay |= (1 << i);
+		/*
+		 * Using the same parameters, it may sometimes pass the test,
+		 * but sometimes it may fail. To make sure the parameters are
+		 * more stable, we test each set of parameters 3 times.
+		 */
+		for (j = 0; j < 3; j++) {
+			mmc_send_tuning(mmc, opcode, &cmd_err);
+			if (!cmd_err) {
+				rise_delay |= (1 << i);
+			} else {
+				rise_delay &= ~(1 << i);
+				break;
+			}
+		}
 	}
 	final_rise_delay = get_best_delay(host, rise_delay);
 	/* if rising edge has enough margin, then do not scan falling edge */
-	if (final_rise_delay.maxlen >= 10 ||
-	    (final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
+	if (final_rise_delay.maxlen >= 12 && final_rise_delay.start < 4)
 		goto skip_fall;
 
 	sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
 	for (i = 0; i < PAD_DELAY_MAX; i++) {
 		sdr_set_field(host->base + MSDC_PAD_TUNE,
 			      MSDC_PAD_TUNE_CMDRDLY, i);
-		mmc_send_tuning(mmc, opcode, &cmd_err);
-		if (!cmd_err)
-			fall_delay |= (1 << i);
+		/*
+		 * Using the same parameters, it may sometimes pass the test,
+		 * but sometimes it may fail. To make sure the parameters are
+		 * more stable, we test each set of parameters 3 times.
+		 */
+		for (j = 0; j < 3; j++) {
+			mmc_send_tuning(mmc, opcode, &cmd_err);
+			if (!cmd_err) {
+				fall_delay |= (1 << i);
+			} else {
+				fall_delay &= ~(1 << i);
+				break;
+			};
+		}
 	}
 	final_fall_delay = get_best_delay(host, fall_delay);
 
 skip_fall:
 	final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen);
+	if (final_fall_delay.maxlen >= 12 && final_fall_delay.start < 4)
+		final_maxlen = final_fall_delay.maxlen;
 	if (final_maxlen == final_rise_delay.maxlen) {
 		sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
 		sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRDLY,
@@ -1366,7 +1414,68 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
 			      final_fall_delay.final_phase);
 		final_delay = final_fall_delay.final_phase;
 	}
+	if (host->hs200_cmd_int_delay)
+		goto skip_internal;
 
+	for (i = 0; i < PAD_DELAY_MAX; i++) {
+		sdr_set_field(host->base + MSDC_PAD_TUNE,
+			      MSDC_PAD_TUNE_CMDRRDLY, i);
+		mmc_send_tuning(mmc, opcode, &cmd_err);
+		if (!cmd_err)
+			internal_delay |= (1 << i);
+	}
+	dev_dbg(host->dev, "Final internal delay: 0x%x\n", internal_delay);
+	internal_delay_phase = get_best_delay(host, internal_delay);
+	sdr_set_field(host->base + MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY,
+		      internal_delay_phase.final_phase);
+skip_internal:
+	dev_dbg(host->dev, "Final cmd pad delay: %x\n", final_delay);
+	return final_delay == 0xff ? -EIO : 0;
+}
+
+static int hs400_tune_response(struct mmc_host *mmc, u32 opcode)
+{
+	struct msdc_host *host = mmc_priv(mmc);
+	u32 cmd_delay = 0;
+	struct msdc_delay_phase final_cmd_delay = { 0,};
+	u8 final_delay;
+	int cmd_err;
+	int i, j;
+
+	/* select EMMC50 PAD CMD tune */
+	sdr_set_bits(host->base + PAD_CMD_TUNE, BIT(0));
+
+	if (mmc->ios.timing == MMC_TIMING_MMC_HS200 ||
+	    mmc->ios.timing == MMC_TIMING_UHS_SDR104)
+		sdr_set_field(host->base + MSDC_PAD_TUNE,
+			      MSDC_PAD_TUNE_CMDRRDLY,
+			      host->hs200_cmd_int_delay);
+	sdr_set_field(host->base + MSDC_IOCON, MSDC_IOCON_RSPL,
+		      host->hs400_cmd_resp_sel);
+	for (i = 0 ; i < PAD_DELAY_MAX; i++) {
+		sdr_set_field(host->base + PAD_CMD_TUNE,
+			      PAD_CMD_TUNE_RX_DLY3, i);
+		/*
+		 * Using the same parameters, it may sometimes pass the test,
+		 * but sometimes it may fail. To make sure the parameters are
+		 * more stable, we test each set of parameters 3 times.
+		 */
+		for (j = 0; j < 3; j++) {
+			mmc_send_tuning(mmc, opcode, &cmd_err);
+			if (!cmd_err) {
+				cmd_delay |= (1 << i);
+			} else {
+				cmd_delay &= ~(1 << i);
+				break;
+			}
+		}
+	}
+	final_cmd_delay = get_best_delay(host, cmd_delay);
+	sdr_set_field(host->base + PAD_CMD_TUNE, PAD_CMD_TUNE_RX_DLY3,
+		      final_cmd_delay.final_phase);
+	final_delay = final_cmd_delay.final_phase;
+
+	dev_dbg(host->dev, "Final cmd pad delay: %x\n", final_delay);
 	return final_delay == 0xff ? -EIO : 0;
 }
 
@@ -1389,7 +1498,7 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
 	}
 	final_rise_delay = get_best_delay(host, rise_delay);
 	/* if rising edge has enough margin, then do not scan falling edge */
-	if (final_rise_delay.maxlen >= 10 ||
+	if (final_rise_delay.maxlen >= 12 ||
 	    (final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
 		goto skip_fall;
 
@@ -1422,6 +1531,7 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
 		final_delay = final_fall_delay.final_phase;
 	}
 
+	dev_dbg(host->dev, "Final data pad delay: %x\n", final_delay);
 	return final_delay == 0xff ? -EIO : 0;
 }
 
@@ -1430,7 +1540,10 @@ static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode)
 	struct msdc_host *host = mmc_priv(mmc);
 	int ret;
 
-	ret = msdc_tune_response(mmc, opcode);
+	if (host->hs400_mode)
+		ret = hs400_tune_response(mmc, opcode);
+	else
+		ret = msdc_tune_response(mmc, opcode);
 	if (ret == -EIO) {
 		dev_err(host->dev, "Tune response fail!\n");
 		return ret;
@@ -1443,6 +1556,7 @@ static int msdc_execute_tuning(struct mmc_host *mmc, u32 opcode)
 
 	host->saved_tune_para.iocon = readl(host->base + MSDC_IOCON);
 	host->saved_tune_para.pad_tune = readl(host->base + MSDC_PAD_TUNE);
+	host->saved_tune_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
 	return ret;
 }
 
@@ -1477,6 +1591,30 @@ static void msdc_hw_reset(struct mmc_host *mmc)
 	.hw_reset = msdc_hw_reset,
 };
 
+static void msdc_of_property_parse(struct platform_device *pdev,
+				   struct msdc_host *host)
+{
+	if (!of_property_read_u32(pdev->dev.of_node, "hs400-ds-delay",
+				  &host->hs400_ds_delay))
+		dev_dbg(&pdev->dev, "hs400-ds-delay: %x\n",
+			host->hs400_ds_delay);
+
+	if (!of_property_read_u32(pdev->dev.of_node, "mtk-hs200-cmd-int-delay",
+				  &host->hs200_cmd_int_delay))
+		dev_dbg(&pdev->dev, "host->hs200-cmd-int-delay: %x\n",
+			host->hs200_cmd_int_delay);
+
+	if (!of_property_read_u32(pdev->dev.of_node, "mtk-hs400-cmd-int-delay",
+				  &host->hs400_cmd_int_delay))
+		dev_dbg(&pdev->dev, "host->hs400-cmd-int-delay: %x\n",
+			host->hs400_cmd_int_delay);
+
+	if (!of_property_read_u32(pdev->dev.of_node, "mtk-hs400-cmd-resp-sel",
+				  &host->hs400_cmd_resp_sel))
+		dev_dbg(&pdev->dev, "host->hs200_cmd-resp-sel: %x\n",
+			host->hs400_cmd_resp_sel);
+}
+
 static int msdc_drv_probe(struct platform_device *pdev)
 {
 	struct mmc_host *mmc;
@@ -1497,7 +1635,6 @@ static int msdc_drv_probe(struct platform_device *pdev)
 	ret = mmc_of_parse(mmc);
 	if (ret)
 		goto host_free;
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	host->base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(host->base)) {
@@ -1548,10 +1685,7 @@ static int msdc_drv_probe(struct platform_device *pdev)
 		goto host_free;
 	}
 
-	if (!of_property_read_u32(pdev->dev.of_node, "hs400-ds-delay",
-				  &host->hs400_ds_delay))
-		dev_dbg(&pdev->dev, "hs400-ds-delay: %x\n",
-			host->hs400_ds_delay);
+	msdc_of_property_parse(pdev, host);
 
 	host->dev = &pdev->dev;
 	host->mmc = mmc;
@@ -1663,6 +1797,7 @@ static void msdc_save_reg(struct msdc_host *host)
 	host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT);
 	host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1);
 	host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
+	host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
 	host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
 }
 
@@ -1675,6 +1810,7 @@ static void msdc_restore_reg(struct msdc_host *host)
 	writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT);
 	writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1);
 	writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
+	writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE);
 	writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
 }
 
-- 
1.7.9.5

[toc] | [prev] | [next] | [standalone]

#1563289 — Re: [PATCH v3 3/3] mmc: mediatek: Use data tune for CMD line tune

Fromkbuild test robot <lkp@intel.com>
Date2017-01-20 05:50 +0100
SubjectRe: [PATCH v3 3/3] mmc: mediatek: Use data tune for CMD line tune
Message-ID<t1zjb-2AL-3@gated-at.bofh.it>
In reply to#1562577
Hi yong,

[auto build test WARNING on robh/for-next]
[also build test WARNING on v4.10-rc4 next-20170119]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]

url:    https://github.com/0day-ci/linux/commits/Yong-Mao/mmc-mediatek-Use-data-tune-for-CMD-line-tune/20170120-103149
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next


coccinelle warnings: (new ones prefixed by >>)

>> drivers/mmc/host/mtk-sd.c:1400:4-5: Unneeded semicolon

Please review and possibly fold the followup patch.

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[toc] | [prev] | [next] | [standalone]

#1563293 — [PATCH] mmc: mediatek: fix semicolon.cocci warnings

Fromkbuild test robot <lkp@intel.com>
Date2017-01-20 06:00 +0100
Subject[PATCH] mmc: mediatek: fix semicolon.cocci warnings
Message-ID<t1zsR-2DW-5@gated-at.bofh.it>
In reply to#1562577
drivers/mmc/host/mtk-sd.c:1400:4-5: Unneeded semicolon


 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

CC: yong mao <yong.mao@mediatek.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
---

 mtk-sd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1397,7 +1397,7 @@ static int msdc_tune_response(struct mmc
 			} else {
 				fall_delay &= ~(1 << i);
 				break;
-			};
+			}
 		}
 	}
 	final_fall_delay = get_best_delay(host, fall_delay);

[toc] | [prev] | [next] | [standalone]

#1563371 — Re: [PATCH v3 3/3] mmc: mediatek: Use data tune for CMD line tune

FromUlf Hansson <ulf.hansson@linaro.org>
Date2017-01-20 09:30 +0100
SubjectRe: [PATCH v3 3/3] mmc: mediatek: Use data tune for CMD line tune
Message-ID<t1CK6-4SH-15@gated-at.bofh.it>
In reply to#1562577
[...]

>  struct msdc_delay_phase {
> @@ -331,6 +339,9 @@ struct msdc_host {
>         unsigned char timing;
>         bool vqmmc_enabled;
>         u32 hs400_ds_delay;
> +       u32 hs200_cmd_int_delay; /* cmd internal delay for HS200/SDR104 */
> +       u32 hs400_cmd_int_delay; /* cmd internal delay for HS400 */
> +       u32 hs400_cmd_resp_sel;  /* cmd response sample selection for HS400 */

When you converted the DT binding, this should become bool instead.

>         bool hs400_mode;        /* current eMMC will run at hs400 mode */
>         struct msdc_save_para save_para; /* used when gate HCLK */
>         struct msdc_tune_para def_tune_para; /* default tune setting */

[...]

> +static void msdc_of_property_parse(struct platform_device *pdev,
> +                                  struct msdc_host *host)
> +{
> +       if (!of_property_read_u32(pdev->dev.of_node, "hs400-ds-delay",
> +                                 &host->hs400_ds_delay))
> +               dev_dbg(&pdev->dev, "hs400-ds-delay: %x\n",
> +                       host->hs400_ds_delay);

Writing a dev_dbg for each parsed DT property, seems a bit silly. Can
you please remove that.

> +
> +       if (!of_property_read_u32(pdev->dev.of_node, "mtk-hs200-cmd-int-delay",
> +                                 &host->hs200_cmd_int_delay))
> +               dev_dbg(&pdev->dev, "host->hs200-cmd-int-delay: %x\n",
> +                       host->hs200_cmd_int_delay);
> +
> +       if (!of_property_read_u32(pdev->dev.of_node, "mtk-hs400-cmd-int-delay",
> +                                 &host->hs400_cmd_int_delay))
> +               dev_dbg(&pdev->dev, "host->hs400-cmd-int-delay: %x\n",
> +                       host->hs400_cmd_int_delay);
> +
> +       if (!of_property_read_u32(pdev->dev.of_node, "mtk-hs400-cmd-resp-sel",
> +                                 &host->hs400_cmd_resp_sel))
> +               dev_dbg(&pdev->dev, "host->hs200_cmd-resp-sel: %x\n",
> +                       host->hs400_cmd_resp_sel);
> +}
> +
>  static int msdc_drv_probe(struct platform_device *pdev)
>  {
>         struct mmc_host *mmc;
> @@ -1497,7 +1635,6 @@ static int msdc_drv_probe(struct platform_device *pdev)
>         ret = mmc_of_parse(mmc);
>         if (ret)
>                 goto host_free;
> -

Whitespace.

>         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>         host->base = devm_ioremap_resource(&pdev->dev, res);
>         if (IS_ERR(host->base)) {
> @@ -1548,10 +1685,7 @@ static int msdc_drv_probe(struct platform_device *pdev)
>                 goto host_free;
>         }
>
> -       if (!of_property_read_u32(pdev->dev.of_node, "hs400-ds-delay",
> -                                 &host->hs400_ds_delay))
> -               dev_dbg(&pdev->dev, "hs400-ds-delay: %x\n",
> -                       host->hs400_ds_delay);
> +       msdc_of_property_parse(pdev, host);
>
>         host->dev = &pdev->dev;
>         host->mmc = mmc;
> @@ -1663,6 +1797,7 @@ static void msdc_save_reg(struct msdc_host *host)
>         host->save_para.patch_bit0 = readl(host->base + MSDC_PATCH_BIT);
>         host->save_para.patch_bit1 = readl(host->base + MSDC_PATCH_BIT1);
>         host->save_para.pad_ds_tune = readl(host->base + PAD_DS_TUNE);
> +       host->save_para.pad_cmd_tune = readl(host->base + PAD_CMD_TUNE);
>         host->save_para.emmc50_cfg0 = readl(host->base + EMMC50_CFG0);
>  }
>
> @@ -1675,6 +1810,7 @@ static void msdc_restore_reg(struct msdc_host *host)
>         writel(host->save_para.patch_bit0, host->base + MSDC_PATCH_BIT);
>         writel(host->save_para.patch_bit1, host->base + MSDC_PATCH_BIT1);
>         writel(host->save_para.pad_ds_tune, host->base + PAD_DS_TUNE);
> +       writel(host->save_para.pad_cmd_tune, host->base + PAD_CMD_TUNE);
>         writel(host->save_para.emmc50_cfg0, host->base + EMMC50_CFG0);
>  }
>
> --
> 1.7.9.5
>

Please also fold in the change suggested/reported by the kbuild test robot.

Besides the minor things, this looks good to me!

Kind regards
Uffe

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web