Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1552138 > unrolled thread

Re: [PATCH] ARM: dts: sunxi: Use axp209.dtsi for Olinuxino Lime2

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  Re: [PATCH] ARM: dts: sunxi: Use axp209.dtsi for Olinuxino Lime2 Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-05 18:20 +0100

#1552138 — Re: [PATCH] ARM: dts: sunxi: Use axp209.dtsi for Olinuxino Lime2

[Multipart message — attachments visible in raw view] — view raw

On Tue, Dec 27, 2016 at 11:22:38AM +0100, Emmanuel Vadot wrote:
> Use axp209.dtsi in sun7i-a20-olinuxino-lime2.dts and correct
> some regulators.
> 
> DCDC2 is used for vdd-cpu so it should never be bellow 1V and above 1.4V
> DCDC3 is used for VDD_INT so same as above.
> LD01 is used for the RTC, and should have a typical value of 1.3V
> LD02 is used for AVCC and should have a typical value of 3.0V
> LD03/4 are used for Port-E/Port-G Power pin, and the schematics recommands
> to set them to 2.8V as they can be used for CSI0/1.
> 
> Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com>

Applied, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web