Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1552138
| From | Maxime Ripard <maxime.ripard@free-electrons.com> |
|---|---|
| Newsgroups | linux.kernel |
| Subject | Re: [PATCH] ARM: dts: sunxi: Use axp209.dtsi for Olinuxino Lime2 |
| Date | 2017-01-05 18:20 +0100 |
| Message-ID | <sWjRM-5ZY-43@gated-at.bofh.it> (permalink) |
| References | <sSXb4-Mt-7@gated-at.bofh.it> |
| Organization | linux.* mail to news gateway |
[Multipart message — attachments visible in raw view] - view raw
On Tue, Dec 27, 2016 at 11:22:38AM +0100, Emmanuel Vadot wrote: > Use axp209.dtsi in sun7i-a20-olinuxino-lime2.dts and correct > some regulators. > > DCDC2 is used for vdd-cpu so it should never be bellow 1V and above 1.4V > DCDC3 is used for VDD_INT so same as above. > LD01 is used for the RTC, and should have a typical value of 1.3V > LD02 is used for AVCC and should have a typical value of 3.0V > LD03/4 are used for Port-E/Port-G Power pin, and the schematics recommands > to set them to 2.8V as they can be used for CSI0/1. > > Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com> Applied, thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com
Back to linux.kernel | Previous | Next | Find similar | Unroll thread
Re: [PATCH] ARM: dts: sunxi: Use axp209.dtsi for Olinuxino Lime2 Maxime Ripard <maxime.ripard@free-electrons.com> - 2017-01-05 18:20 +0100
csiph-web