Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1530699 > unrolled thread
| Started by | Pali Rohár <pali.rohar@gmail.com> |
|---|---|
| First post | 2016-11-26 18:30 +0100 |
| Last post | 2016-12-06 01:00 +0100 |
| Articles | 2 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: wl1251 & mac address & calibration data Pali Rohár <pali.rohar@gmail.com> - 2016-11-26 18:30 +0100
Re: wl1251 & mac address & calibration data Tony Lindgren <tony@atomide.com> - 2016-12-06 01:00 +0100
| From | Pali Rohár <pali.rohar@gmail.com> |
|---|---|
| Date | 2016-11-26 18:30 +0100 |
| Subject | Re: wl1251 & mac address & calibration data |
| Message-ID | <sHOXv-14Z-11@gated-at.bofh.it> |
[Multipart message — attachments visible in raw view] — view raw
On Thursday 24 November 2016 19:46:01 Aaro Koskinen wrote: > Hi, > > On Thu, Nov 24, 2016 at 04:20:45PM +0100, Pali Rohár wrote: > > Proprietary, signed and closed bootloader NOLO does not support DT. > > So for booting you need to append DTS file to kernel image. > > > > U-Boot is optional and can be used as intermediate bootloader > > between NOLO and kernel. But still it has problems with reading > > from nand, so cannot read NVS data nor MAC address. > > You could use kexec to pass the fixed DT. > > A. IIRC it was broken for N900/omap3, no idea if somebody fixed it. -- Pali Rohár pali.rohar@gmail.com
[toc] | [next] | [standalone]
| From | Tony Lindgren <tony@atomide.com> |
|---|---|
| Date | 2016-12-06 01:00 +0100 |
| Message-ID | <sLbkS-2IL-33@gated-at.bofh.it> |
| In reply to | #1530699 |
* Pali Rohár <pali.rohar@gmail.com> [161126 09:21]: > On Thursday 24 November 2016 19:46:01 Aaro Koskinen wrote: > > Hi, > > > > On Thu, Nov 24, 2016 at 04:20:45PM +0100, Pali Rohár wrote: > > > Proprietary, signed and closed bootloader NOLO does not support DT. > > > So for booting you need to append DTS file to kernel image. > > > > > > U-Boot is optional and can be used as intermediate bootloader > > > between NOLO and kernel. But still it has problems with reading > > > from nand, so cannot read NVS data nor MAC address. > > > > You could use kexec to pass the fixed DT. > > > > A. > > IIRC it was broken for N900/omap3, no idea if somebody fixed it. FYI, at least in next-20161205 kexec works on omap3 for me. Regards, Tony
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web