Re: wl1251 & mac address & calibration data

From	Tony Lindgren <tony@atomide.com>
Newsgroups	linux.kernel
Subject	Re: wl1251 & mac address & calibration data
Date	2016-12-06 01:00 +0100
Message-ID	<sLbkS-2IL-33@gated-at.bofh.it> (permalink)
References	<sCnOh-7dZ-17@gated-at.bofh.it> <sH48h-4wC-17@gated-at.bofh.it> <sH7zb-6SI-21@gated-at.bofh.it> <sHOXv-14Z-11@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

* Pali Rohár <pali.rohar@gmail.com> [161126 09:21]:
> On Thursday 24 November 2016 19:46:01 Aaro Koskinen wrote:
> > Hi,
> > 
> > On Thu, Nov 24, 2016 at 04:20:45PM +0100, Pali Rohár wrote:
> > > Proprietary, signed and closed bootloader NOLO does not support DT.
> > > So for booting you need to append DTS file to kernel image.
> > > 
> > > U-Boot is optional and can be used as intermediate bootloader
> > > between NOLO and kernel. But still it has problems with reading
> > > from nand, so cannot read NVS data nor MAC address.
> > 
> > You could use kexec to pass the fixed DT.
> > 
> > A.
> 
> IIRC it was broken for N900/omap3, no idea if somebody fixed it.

FYI, at least in next-20161205 kexec works on omap3 for me.

Regards,

Tony

Back to linux.kernel | Previous | Next — Previous in thread | Find similar | Unroll thread

Thread

Re: wl1251 & mac address & calibration data Pali Rohár <pali.rohar@gmail.com> - 2016-11-26 18:30 +0100
  Re: wl1251 & mac address & calibration data Tony Lindgren <tony@atomide.com> - 2016-12-06 01:00 +0100

csiph-web