Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1468783 > unrolled thread
| Started by | Florian Fainelli <f.fainelli@gmail.com> |
|---|---|
| First post | 2016-08-23 21:10 +0200 |
| Last post | 2016-08-24 16:20 +0200 |
| Articles | 3 — 3 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
Re: [PATCH] net: phy: micrel: remove suspend/resume Florian Fainelli <f.fainelli@gmail.com> - 2016-08-23 21:10 +0200
Re: [PATCH] net: phy: micrel: remove suspend/resume Xander Huff <xander.huff@ni.com> - 2016-08-24 00:10 +0200
Re: [PATCH] net: phy: micrel: remove suspend/resume Christophe Leroy <christophe.leroy@c-s.fr> - 2016-08-24 16:20 +0200
| From | Florian Fainelli <f.fainelli@gmail.com> |
|---|---|
| Date | 2016-08-23 21:10 +0200 |
| Subject | Re: [PATCH] net: phy: micrel: remove suspend/resume |
| Message-ID | <s9pfc-880-25@gated-at.bofh.it> |
+others,
On 08/23/2016 04:13 AM, Christophe Leroy wrote:
> In ERRATA DS80000700A dated 05 May 2016, Microship recommends to
> not use software power down mode on KSZ8041 family.
s/Microship/Microchip/
> They say they have no plan to fix this ERRATA in future releases.
The errata applies to specific revisions, is this revision present in
the lower 4 bits of the MII_PHYSID2 register such that it could be used
to key the disabling of the power down?
>
> http://ww1.microchip.com/downloads/en/DeviceDoc/80000700A.pdf
>
> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
> ---
> drivers/net/phy/micrel.c | 4 ----
> 1 file changed, 4 deletions(-)
>
> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
> index 053e879..f456c55 100644
> --- a/drivers/net/phy/micrel.c
> +++ b/drivers/net/phy/micrel.c
> @@ -837,8 +837,6 @@ static struct phy_driver ksphy_driver[] = {
> .get_sset_count = kszphy_get_sset_count,
> .get_strings = kszphy_get_strings,
> .get_stats = kszphy_get_stats,
> - .suspend = genphy_suspend,
> - .resume = genphy_resume,
> }, {
> .phy_id = PHY_ID_KSZ8041RNLI,
> .phy_id_mask = MICREL_PHY_ID_MASK,
> @@ -856,8 +854,6 @@ static struct phy_driver ksphy_driver[] = {
> .get_sset_count = kszphy_get_sset_count,
> .get_strings = kszphy_get_strings,
> .get_stats = kszphy_get_stats,
> - .suspend = genphy_suspend,
> - .resume = genphy_resume,
> }, {
> .phy_id = PHY_ID_KSZ8051,
> .phy_id_mask = MICREL_PHY_ID_MASK,
>
--
Florian
[toc] | [next] | [standalone]
| From | Xander Huff <xander.huff@ni.com> |
|---|---|
| Date | 2016-08-24 00:10 +0200 |
| Message-ID | <s9s3o-1C3-17@gated-at.bofh.it> |
| In reply to | #1468783 |
On 8/23/2016 2:03 PM, Florian Fainelli wrote:
> +others,
>
> On 08/23/2016 04:13 AM, Christophe Leroy wrote:
>> In ERRATA DS80000700A dated 05 May 2016, Microship recommends to
>> not use software power down mode on KSZ8041 family.
>
> s/Microship/Microchip/
>
>> They say they have no plan to fix this ERRATA in future releases.
>
> The errata applies to specific revisions, is this revision present in
> the lower 4 bits of the MII_PHYSID2 register such that it could be used
> to key the disabling of the power down?
>
>>
>> http://ww1.microchip.com/downloads/en/DeviceDoc/80000700A.pdf
>>
>> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
>> ---
>> drivers/net/phy/micrel.c | 4 ----
>> 1 file changed, 4 deletions(-)
>>
>> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
>> index 053e879..f456c55 100644
>> --- a/drivers/net/phy/micrel.c
>> +++ b/drivers/net/phy/micrel.c
>> @@ -837,8 +837,6 @@ static struct phy_driver ksphy_driver[] = {
>> .get_sset_count = kszphy_get_sset_count,
>> .get_strings = kszphy_get_strings,
>> .get_stats = kszphy_get_stats,
>> - .suspend = genphy_suspend,
>> - .resume = genphy_resume,
>> }, {
>> .phy_id = PHY_ID_KSZ8041RNLI,
>> .phy_id_mask = MICREL_PHY_ID_MASK,
>> @@ -856,8 +854,6 @@ static struct phy_driver ksphy_driver[] = {
>> .get_sset_count = kszphy_get_sset_count,
>> .get_strings = kszphy_get_strings,
>> .get_stats = kszphy_get_stats,
>> - .suspend = genphy_suspend,
>> - .resume = genphy_resume,
>> }, {
>> .phy_id = PHY_ID_KSZ8051,
>> .phy_id_mask = MICREL_PHY_ID_MASK,
>>
>
>
It doesn't appear that KSZ9031 is affected by this errata; no mention of suspend:
http://ww1.microchip.com/downloads/en/DeviceDoc/KSZ9031MNX_Errata_Rev%20A_A2_032515.pdf
--
Xander Huff
Staff Software Engineer
National Instruments
[toc] | [prev] | [next] | [standalone]
| From | Christophe Leroy <christophe.leroy@c-s.fr> |
|---|---|
| Date | 2016-08-24 16:20 +0200 |
| Message-ID | <s9Hc5-3pN-7@gated-at.bofh.it> |
| In reply to | #1468783 |
Le 23/08/2016 à 21:03, Florian Fainelli a écrit :
> +others,
>
> On 08/23/2016 04:13 AM, Christophe Leroy wrote:
>> In ERRATA DS80000700A dated 05 May 2016, Microship recommends to
>> not use software power down mode on KSZ8041 family.
>
> s/Microship/Microchip/
>
>> They say they have no plan to fix this ERRATA in future releases.
>
> The errata applies to specific revisions, is this revision present in
> the lower 4 bits of the MII_PHYSID2 register such that it could be used
> to key the disabling of the power down?
It doesn't seem clear to me how this could/should be handled.
According to the documentation, all variants have the same ID 0x0022151x
with revision x. A3 has ID 0x00221512 and A4 has 0x00221513.
According to the doc, the KSZ8041RNLI should has same ID. But according
to micrel driver, it has ID 0x00221537. And the buggy revision of that
one is rev A. Is it what the 7 means ?
The ERRATA applies to KSZ8041NL revision A4 and to KSZ8041NL-AM revision
A3. My understanding it that both variants have ID 0x0022151x, ie
KSZ8041NL-AM revision A3 has ID 0x00221512 and KSZ8041NL revision A4 has
ID 0x00221513. But KSZ8041NL revision A3 also has ID 0x00221512 and the
ERRATA doesn't apply to it.
So what can be done really ? Only apply the fix to ID 0x00221513 (which
is what I need as I have KSZ8041NL revision A4 on my boards) ? Or apply
it for all KSZ8041 and KSZ8041RNLI to be on the safe side ?
Christophe
>
>>
>> http://ww1.microchip.com/downloads/en/DeviceDoc/80000700A.pdf
>>
>> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
>> ---
>> drivers/net/phy/micrel.c | 4 ----
>> 1 file changed, 4 deletions(-)
>>
>> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
>> index 053e879..f456c55 100644
>> --- a/drivers/net/phy/micrel.c
>> +++ b/drivers/net/phy/micrel.c
>> @@ -837,8 +837,6 @@ static struct phy_driver ksphy_driver[] = {
>> .get_sset_count = kszphy_get_sset_count,
>> .get_strings = kszphy_get_strings,
>> .get_stats = kszphy_get_stats,
>> - .suspend = genphy_suspend,
>> - .resume = genphy_resume,
>> }, {
>> .phy_id = PHY_ID_KSZ8041RNLI,
>> .phy_id_mask = MICREL_PHY_ID_MASK,
>> @@ -856,8 +854,6 @@ static struct phy_driver ksphy_driver[] = {
>> .get_sset_count = kszphy_get_sset_count,
>> .get_strings = kszphy_get_strings,
>> .get_stats = kszphy_get_stats,
>> - .suspend = genphy_suspend,
>> - .resume = genphy_resume,
>> }, {
>> .phy_id = PHY_ID_KSZ8051,
>> .phy_id_mask = MICREL_PHY_ID_MASK,
>>
>
>
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web