Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1465526 > unrolled thread

[PATCH] mwifiex: propagate error if IRQ request fails in mwifiex_sdio_of()

Back to article view | Back to linux.kernel

Contents

  [PATCH] mwifiex: propagate error if IRQ request fails in mwifiex_sdio_of() Javier Martinez Canillas <javier@osg.samsung.com> - 2016-08-18 16:30 +0200
    Re: [PATCH] mwifiex: propagate error if IRQ request fails in  mwifiex_sdio_of() Arend van Spriel <arend.vanspriel@broadcom.com> - 2016-08-19 03:00 +0200
      Re: [PATCH] mwifiex: propagate error if IRQ request fails in  mwifiex_sdio_of() Javier Martinez Canillas <javier@osg.samsung.com> - 2016-08-19 04:30 +0200
    Re: [PATCH] mwifiex: propagate error if IRQ request fails in  mwifiex_sdio_of() Arend van Spriel <arend.vanspriel@broadcom.com> - 2016-08-19 03:10 +0200
      Re: [PATCH] mwifiex: propagate error if IRQ request fails in  mwifiex_sdio_of() Javier Martinez Canillas <javier@osg.samsung.com> - 2016-08-19 03:40 +0200

#1465526 — [PATCH] mwifiex: propagate error if IRQ request fails in mwifiex_sdio_of()

If request_irq() fails in mwifiex_sdio_probe_of(), only an error message
is printed but the actual error is not propagated to the caller function.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
---

 drivers/net/wireless/marvell/mwifiex/sdio.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c
index d3e1561ca075..00727936ad6e 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.c
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
@@ -125,6 +125,7 @@ static int mwifiex_sdio_probe_of(struct device *dev, struct sdio_mmc_card *card)
 				dev_err(dev,
 					"Failed to request irq_wifi %d (%d)\n",
 					cfg->irq_wifi, ret);
+				return ret;
 			}
 			disable_irq(cfg->irq_wifi);
 		}
-- 
2.5.5

[toc] | [next] | [standalone]

#1465674 — Re: [PATCH] mwifiex: propagate error if IRQ request fails in mwifiex_sdio_of()

On 18-08-16 21:29, Javier Martinez Canillas wrote:
> Hello Arend,
> 
> Thanks a lot for your feedback.
> 
> On 08/18/2016 03:14 PM, Arend van Spriel wrote:
>> On 18-08-16 16:17, Javier Martinez Canillas wrote:
>>> If request_irq() fails in mwifiex_sdio_probe_of(), only an error message
>>> is printed but the actual error is not propagated to the caller function.
>>
>> Hmm. The caller function, ie. mwifiex_sdio_probe(), does not seem to care.
>>
> 
> Hmm, I'm not so sure about that. It's checking the wifiex_sdio_probe_of()
> return value.

Ok. I looked at 4.7 sources on lxr [1].

> If the IRQ request failing is not an error, then at the very least the call
> to disable_irq() should be avoided if request_irq() fails, and the message
> should be changed from dev_err() to dev_dgb() or dev_info().

agree.

>> The device may still function without this wake interrupt.
>>
> 
> That's correct, the binding says that the "interrupts" property in the child
> node is optional since is just a wakeup IRQ. Now the question is if should
> be an error if the IRQ is defined but fails to be requested.

Clearly it indicates an error in the DT specification so behavior is not
as expected. Personally I would indeed consider it an error, but I was
just indicating that it might have done like this intentionally.

Regards,
Arend

[1]
http://lxr.free-electrons.com/source/drivers/net/wireless/marvell/mwifiex/sdio.c#L192

>> Regards,
>> Arend
>>
> 
> Best regards,
> 

[toc] | [prev] | [next] | [standalone]

#1465902 — Re: [PATCH] mwifiex: propagate error if IRQ request fails in mwifiex_sdio_of()

Hello Arend,

On 08/18/2016 03:49 PM, Arend van Spriel wrote:
> 
> 
> On 18-08-16 21:29, Javier Martinez Canillas wrote:
>> Hello Arend,
>>
>> Thanks a lot for your feedback.
>>
>> On 08/18/2016 03:14 PM, Arend van Spriel wrote:
>>> On 18-08-16 16:17, Javier Martinez Canillas wrote:
>>>> If request_irq() fails in mwifiex_sdio_probe_of(), only an error message
>>>> is printed but the actual error is not propagated to the caller function.
>>>
>>> Hmm. The caller function, ie. mwifiex_sdio_probe(), does not seem to care.
>>>
>>
>> Hmm, I'm not so sure about that. It's checking the wifiex_sdio_probe_of()
>> return value.
> 
> Ok. I looked at 4.7 sources on lxr [1].
>

Oh, right. That was fixed quite recently indeed.
 
>> If the IRQ request failing is not an error, then at the very least the call
>> to disable_irq() should be avoided if request_irq() fails, and the message
>> should be changed from dev_err() to dev_dgb() or dev_info().
> 
> agree.
> 
>>> The device may still function without this wake interrupt.
>>>
>>
>> That's correct, the binding says that the "interrupts" property in the child
>> node is optional since is just a wakeup IRQ. Now the question is if should
>> be an error if the IRQ is defined but fails to be requested.
> 
> Clearly it indicates an error in the DT specification so behavior is not
> as expected. Personally I would indeed consider it an error, but I was
> just indicating that it might have done like this intentionally.
>

Yes, might had been done intentionally indeed but I don't think that is
the case since the driver lacked error checking and propagation in many
places. But if someone thinks that's better to not honor the DT and at
least have the driver working without the wake up capability, then I'm
happy to respin the patch and change the print log level to info/debug.
 
> Regards,
> Arend
> 

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

[toc] | [prev] | [next] | [standalone]

#1465702 — Re: [PATCH] mwifiex: propagate error if IRQ request fails in mwifiex_sdio_of()

On 18-08-16 16:17, Javier Martinez Canillas wrote:
> If request_irq() fails in mwifiex_sdio_probe_of(), only an error message
> is printed but the actual error is not propagated to the caller function.

Hmm. The caller function, ie. mwifiex_sdio_probe(), does not seem to care.

The device may still function without this wake interrupt.

Regards,
Arend

> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> 
>  drivers/net/wireless/marvell/mwifiex/sdio.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c
> index d3e1561ca075..00727936ad6e 100644
> --- a/drivers/net/wireless/marvell/mwifiex/sdio.c
> +++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
> @@ -125,6 +125,7 @@ static int mwifiex_sdio_probe_of(struct device *dev, struct sdio_mmc_card *card)
>  				dev_err(dev,
>  					"Failed to request irq_wifi %d (%d)\n",
>  					cfg->irq_wifi, ret);
> +				return ret;
>  			}
>  			disable_irq(cfg->irq_wifi);
>  		}
> 

[toc] | [prev] | [next] | [standalone]

#1465810 — Re: [PATCH] mwifiex: propagate error if IRQ request fails in mwifiex_sdio_of()

Hello Arend,

Thanks a lot for your feedback.

On 08/18/2016 03:14 PM, Arend van Spriel wrote:
> On 18-08-16 16:17, Javier Martinez Canillas wrote:
>> If request_irq() fails in mwifiex_sdio_probe_of(), only an error message
>> is printed but the actual error is not propagated to the caller function.
> 
> Hmm. The caller function, ie. mwifiex_sdio_probe(), does not seem to care.
>

Hmm, I'm not so sure about that. It's checking the wifiex_sdio_probe_of()
return value.

If the IRQ request failing is not an error, then at the very least the call
to disable_irq() should be avoided if request_irq() fails, and the message
should be changed from dev_err() to dev_dgb() or dev_info().
 
> The device may still function without this wake interrupt.
>

That's correct, the binding says that the "interrupts" property in the child
node is optional since is just a wakeup IRQ. Now the question is if should
be an error if the IRQ is defined but fails to be requested.

> Regards,
> Arend
> 

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web