Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1458288 > unrolled thread
| Started by | John Stultz <john.stultz@linaro.org> |
|---|---|
| First post | 2016-08-09 01:10 +0200 |
| Last post | 2016-08-10 07:00 +0200 |
| Articles | 3 — 2 participants |
Back to article view | Back to linux.kernel
This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by
below is the oldest one visible, not the original post.
[RFC][PATCH 3/4] arm64: dts: hikey: Add hikey support for syscon-reboot-mode John Stultz <john.stultz@linaro.org> - 2016-08-09 01:10 +0200
Re: [RFC][PATCH 3/4] arm64: dts: hikey: Add hikey support for syscon-reboot-mode Bjorn Andersson <bjorn.andersson@linaro.org> - 2016-08-10 06:40 +0200
Re: [RFC][PATCH 3/4] arm64: dts: hikey: Add hikey support for syscon-reboot-mode John Stultz <john.stultz@linaro.org> - 2016-08-10 07:00 +0200
| From | John Stultz <john.stultz@linaro.org> |
|---|---|
| Date | 2016-08-09 01:10 +0200 |
| Subject | [RFC][PATCH 3/4] arm64: dts: hikey: Add hikey support for syscon-reboot-mode |
| Message-ID | <s41Qd-7Ui-3@gated-at.bofh.it> |
Add support to hikey dts for the syscon-reboot-mode driver.
After trying an approach using a sram driver and node, a number
of issues cropped up which would make it so we would be
duplicating a lot of extra syscon infrastructure in order to
support mfds on sram. After talking with Bjorn, using the
syscon driver for this seems like an better choice.
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 8597e9b..b2683e4 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -29,6 +29,7 @@
* Reserve below regions from memory node:
*
* 0x05e0,0000 - 0x05ef,ffff: MCU firmware runtime using
+ * 0x05f0,1000 - 0x05f0,1fff: Reboot reason
* 0x06df,f000 - 0x06df,ffff: Mailbox message data
* 0x0740,f000 - 0x0740,ffff: MCU firmware section
* 0x3e00,0000 - 0x3fff,ffff: OP-TEE
@@ -36,11 +37,26 @@
memory@0 {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x05e00000>,
- <0x00000000 0x05f00000 0x00000000 0x00eff000>,
+ <0x00000000 0x05f00000 0x00000000 0x00001000>,
+ <0x00000000 0x05f02000 0x00000000 0x00efd000>,
<0x00000000 0x06e00000 0x00000000 0x0060f000>,
<0x00000000 0x07410000 0x00000000 0x36bf0000>;
};
+ reboot-mode-syscon@5f01000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x05f01000 0x0 0x00001000>;
+
+ reboot-mode@0 {
+ compatible = "syscon-reboot-mode";
+ offset = <0x0>;
+
+ mode-normal = <0x77665501>;
+ mode-bootloader = <0x77665500>;
+ mode-recovery = <0x77665502>;
+ };
+ };
+
soc {
spi0: spi@f7106000 {
status = "ok";
--
1.9.1
[toc] | [next] | [standalone]
| From | Bjorn Andersson <bjorn.andersson@linaro.org> |
|---|---|
| Date | 2016-08-10 06:40 +0200 |
| Subject | Re: [RFC][PATCH 3/4] arm64: dts: hikey: Add hikey support for syscon-reboot-mode |
| Message-ID | <s4tt7-oV-13@gated-at.bofh.it> |
| In reply to | #1458288 |
On Mon 08 Aug 16:03 PDT 2016, John Stultz wrote:
[..]
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
[..]
> memory@0 {
> device_type = "memory";
> reg = <0x00000000 0x00000000 0x00000000 0x05e00000>,
> - <0x00000000 0x05f00000 0x00000000 0x00eff000>,
> + <0x00000000 0x05f00000 0x00000000 0x00001000>,
> + <0x00000000 0x05f02000 0x00000000 0x00efd000>,
> <0x00000000 0x06e00000 0x00000000 0x0060f000>,
> <0x00000000 0x07410000 0x00000000 0x36bf0000>;
> };
As I said when talked about this, I don't think you should punch holes
in the /memory node, but rather add these regions as no-map in a
/reserved-memory node. But that's a unrelated matter.
>
> + reboot-mode-syscon@5f01000 {
> + compatible = "syscon", "simple-mfd";
> + reg = <0x0 0x05f01000 0x0 0x00001000>;
> +
> + reboot-mode@0 {
Drop the @0
Other than that:
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> + compatible = "syscon-reboot-mode";
> + offset = <0x0>;
> +
> + mode-normal = <0x77665501>;
> + mode-bootloader = <0x77665500>;
> + mode-recovery = <0x77665502>;
> + };
> + };
> +
> soc {
> spi0: spi@f7106000 {
> status = "ok";
Regards,
Bjorn
[toc] | [prev] | [next] | [standalone]
| From | John Stultz <john.stultz@linaro.org> |
|---|---|
| Date | 2016-08-10 07:00 +0200 |
| Message-ID | <s4tMy-vL-5@gated-at.bofh.it> |
| In reply to | #1459290 |
On Tue, Aug 9, 2016 at 9:34 PM, Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
> On Mon 08 Aug 16:03 PDT 2016, John Stultz wrote:
>
> [..]
>> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
> [..]
>> memory@0 {
>> device_type = "memory";
>> reg = <0x00000000 0x00000000 0x00000000 0x05e00000>,
>> - <0x00000000 0x05f00000 0x00000000 0x00eff000>,
>> + <0x00000000 0x05f00000 0x00000000 0x00001000>,
>> + <0x00000000 0x05f02000 0x00000000 0x00efd000>,
>> <0x00000000 0x06e00000 0x00000000 0x0060f000>,
>> <0x00000000 0x07410000 0x00000000 0x36bf0000>;
>> };
>
> As I said when talked about this, I don't think you should punch holes
> in the /memory node, but rather add these regions as no-map in a
> /reserved-memory node. But that's a unrelated matter.
Yea. I need to sync w/ Wei and Guodong to see about reworking all of
those to use /reserved-memory, but for now I'd like to stay in sync w/
how they have it setup.
>>
>> + reboot-mode-syscon@5f01000 {
>> + compatible = "syscon", "simple-mfd";
>> + reg = <0x0 0x05f01000 0x0 0x00001000>;
>> +
>> + reboot-mode@0 {
>
> Drop the @0
Will do.
>
> Other than that:
> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Thanks!
-john
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web