Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1399600 > unrolled thread

[PATCH v2 3/3] arm: dts: bcm5301x: Add syscon based reboot in DT

Back to article view | Back to linux.kernel

This discussion starts older than the indexed window; earlier articles aren't shown. The article labeled Started by below is the oldest one visible, not the original post.

Contents

  [PATCH v2 3/3] arm: dts: bcm5301x: Add syscon based reboot in DT Jon Mason <jon.mason@broadcom.com> - 2016-05-12 01:20 +0200

#1399600 — [PATCH v2 3/3] arm: dts: bcm5301x: Add syscon based reboot in DT

Add the ability to reboot via a reset of the processor.  This is
achieved via a write of 0x39 to the CRU Reset Register.  Unfortunately,
this only resets the core and not the other IP blocks.  So if possible,
other methods should be used on the individual boards.

Signed-off-by: Jon Mason <jonmason@broadcom.com>
---
 arch/arm/boot/dts/bcm5301x.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index ffc4a9b..d4e1672 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -246,6 +246,18 @@
 				     "sata2";
 	};
 
+	cru: cru@1800c184 {
+		compatible = "syscon";
+		reg = <0x1800c184 0x4>;
+	};
+
+	reboot@1800c184 {
+		compatible ="syscon-reboot";
+		regmap = <&cru>;
+		offset = <0>;
+		mask = <0x39>;
+	};
+
 	nand: nand@18028000 {
 		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
 		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
-- 
1.9.1

[toc] | [standalone]

Back to top | Article view | linux.kernel

csiph-web