[PATCH v2 3/3] arm: dts: bcm5301x: Add syscon based reboot in DT

From	Jon Mason <jon.mason@broadcom.com>
Newsgroups	linux.kernel
Subject	[PATCH v2 3/3] arm: dts: bcm5301x: Add syscon based reboot in DT
Date	2016-05-12 01:20 +0200
Message-ID	<rxLA6-1qt-19@gated-at.bofh.it> (permalink)
References	<rxLA6-1qt-13@gated-at.bofh.it>
Organization	linux.* mail to news gateway

Show all headers | View raw

Add the ability to reboot via a reset of the processor.  This is
achieved via a write of 0x39 to the CRU Reset Register.  Unfortunately,
this only resets the core and not the other IP blocks.  So if possible,
other methods should be used on the individual boards.

Signed-off-by: Jon Mason <jonmason@broadcom.com>
---
 arch/arm/boot/dts/bcm5301x.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index ffc4a9b..d4e1672 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -246,6 +246,18 @@
 				     "sata2";
 	};
 
+	cru: cru@1800c184 {
+		compatible = "syscon";
+		reg = <0x1800c184 0x4>;
+	};
+
+	reboot@1800c184 {
+		compatible ="syscon-reboot";
+		regmap = <&cru>;
+		offset = <0>;
+		mask = <0x39>;
+	};
+
 	nand: nand@18028000 {
 		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
 		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
-- 
1.9.1

Back to linux.kernel | Previous | Next | Find similar | Unroll thread

Thread

[PATCH v2 3/3] arm: dts: bcm5301x: Add syscon based reboot in DT Jon Mason <jon.mason@broadcom.com> - 2016-05-12 01:20 +0200

csiph-web