Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1367330 > unrolled thread

[PATCH] regulator: Fix deadlock during regulator registration

Back to article view | Back to linux.kernel

Contents

  [PATCH] regulator: Fix deadlock during regulator registration Jon Hunter <jonathanh@nvidia.com> - 2016-03-30 18:10 +0200
    Re: [PATCH] regulator: Fix deadlock during regulator registration Mark Brown <broonie@kernel.org> - 2016-03-30 18:20 +0200
      Re: [PATCH] regulator: Fix deadlock during regulator registration Jon Hunter <jonathanh@nvidia.com> - 2016-03-30 18:50 +0200
        Re: [PATCH] regulator: Fix deadlock during regulator registration Mark Brown <broonie@kernel.org> - 2016-03-30 19:10 +0200
          Re: [PATCH] regulator: Fix deadlock during regulator registration Jon Hunter <jonathanh@nvidia.com> - 2016-03-30 19:50 +0200
    Re: [PATCH] regulator: Fix deadlock during regulator registration Javier Martinez Canillas <javier@osg.samsung.com> - 2016-03-31 01:30 +0200
      Re: [PATCH] regulator: Fix deadlock during regulator registration Javier Martinez Canillas <javier@osg.samsung.com> - 2016-03-31 01:40 +0200
      Re: [PATCH] regulator: Fix deadlock during regulator registration Mark Brown <broonie@kernel.org> - 2016-03-31 01:40 +0200

#1367330 — [PATCH] regulator: Fix deadlock during regulator registration

Commit 5e3ca2b349b1 ("regulator: Try to resolve regulators supplies on
registration") added a call to regulator_resolve_supply() within
regulator_register() where the regulator_list_mutex is held. This causes
the following deadlock to occur on the Tegra114 Dalmore board when the
palmas PMIC is registered because regulator_register_resolve_supply()
calls regulator_dev_lookup() which may try to acquire the
regulator_list_mutex again.

 INFO: task swapper/0:1 blocked for more than 120 seconds.
 Not tainted 4.6.0-rc1-00001-g5e3ca2b-dirty #290
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 swapper/0 D c07daeac 0 1 0 0x00000000
 [<c07daeac>] (__schedule) from [<c07db454>] (schedule+0x50/0xc0)
 [<c07db454>] (schedule) from [<c07db6b0>] (schedule_preempt_disabled+0x24/0x40)
 [<c07db6b0>] (schedule_preempt_disabled) from [<c07ddd48>] (__mutex_lock_slowpath+0x17c/0x3e4)
 [<c07ddd48>] (__mutex_lock_slowpath) from [<c07ddfbc>] (mutex_lock+0xc/0x24)
 [<c07ddfbc>] (mutex_lock) from [<c03ab5f0>] (regulator_dev_lookup+0x130/0x208)
 [<c03ab5f0>] (regulator_dev_lookup) from [<c03aedd0>] (regulator_resolve_supply+0x94/0x2bc)
 [<c03aedd0>] (regulator_resolve_supply) from [<c04364e4>] (class_for_each_device+0x54/0xa8)
 [<c04364e4>] (class_for_each_device) from [<c03ae0a4>] (regulator_register+0x8cc/0xd10)
 [<c03ae0a4>] (regulator_register) from [<c03b0000>] (devm_regulator_register+0x40/0x74)
 [<c03b0000>] (devm_regulator_register) from [<c03b2ef0>] (palmas_smps_registration+0x254/0x3fc)
 [<c03b2ef0>] (palmas_smps_registration) from [<c03b3400>] (palmas_regulators_probe+0x368/0x424)
 [<c03b3400>] (palmas_regulators_probe) from [<c0436b1c>] (platform_drv_probe+0x50/0xb0)
 [<c0436b1c>] (platform_drv_probe) from [<c0435548>] (driver_probe_device+0x1f4/0x2b0)
 [<c0435548>] (driver_probe_device) from [<c0433ad0>] (bus_for_each_drv+0x44/0x8c)
 [<c0433ad0>] (bus_for_each_drv) from [<c04352cc>] (__device_attach+0x9c/0x100)
 [<c04352cc>] (__device_attach) from [<c0434958>] (bus_probe_device+0x84/0x8c)
 [<c0434958>] (bus_probe_device) from [<c0432e88>] (device_add+0x33c/0x524)
 [<c0432e88>] (device_add) from [<c05b1e48>] (of_platform_device_create_pdata+0x80/0xc4)
 [<c05b1e48>] (of_platform_device_create_pdata) from [<c05b1f5c>] (of_platform_bus_create+0xd0/0x2dc)
 [<c05b1f5c>] (of_platform_bus_create) from [<c05b21c4>] (of_platform_populate+0x5c/0xac)
 [<c05b21c4>] (of_platform_populate) from [<c04596fc>] (palmas_i2c_probe+0x324/0x580)
 [<c04596fc>] (palmas_i2c_probe) from [<c054ae1c>] (i2c_device_probe+0x140/0x1d0)
 [<c054ae1c>] (i2c_device_probe) from [<c0435548>] (driver_probe_device+0x1f4/0x2b0)
 [<c0435548>] (driver_probe_device) from [<c0433ad0>] (bus_for_each_drv+0x44/0x8c)
 [<c0433ad0>] (bus_for_each_drv) from [<c04352cc>] (__device_attach+0x9c/0x100)
 [<c04352cc>] (__device_attach) from [<c0434958>] (bus_probe_device+0x84/0x8c)
 [<c0434958>] (bus_probe_device) from [<c0432e88>] (device_add+0x33c/0x524)
 [<c0432e88>] (device_add) from [<c054b814>] (i2c_new_device+0x14c/0x184)
 [<c054b814>] (i2c_new_device) from [<c054bd0c>] (i2c_register_adapter+0x248/0x46c)
 [<c054bd0c>] (i2c_register_adapter) from [<c054fca0>] (tegra_i2c_probe+0x2d8/0x3bc)
 [<c054fca0>] (tegra_i2c_probe) from [<c0436b1c>] (platform_drv_probe+0x50/0xb0)
 [<c0436b1c>] (platform_drv_probe) from [<c0435548>] (driver_probe_device+0x1f4/0x2b0)
 [<c0435548>] (driver_probe_device) from [<c04356b0>] (__driver_attach+0xac/0xb0)
 [<c04356b0>] (__driver_attach) from [<c0433b6c>] (bus_for_each_dev+0x54/0x88)
 [<c0433b6c>] (bus_for_each_dev) from [<c0434b3c>] (bus_add_driver+0xe8/0x1f4)
 [<c0434b3c>] (bus_add_driver) from [<c0435eac>] (driver_register+0x78/0xf4)
 [<c0435eac>] (driver_register) from [<c0101768>] (do_one_initcall+0x84/0x1d4)
 [<c0101768>] (do_one_initcall) from [<c0b00d90>] (kernel_init_freeable+0x11c/0x1e8)
 [<c0b00d90>] (kernel_init_freeable) from [<c07d9350>] (kernel_init+0x8/0x118)
 [<c07d9350>] (kernel_init) from [<c0107938>] (ret_from_fork+0x14/0x3c)

Fix this by releasing the mutex before calling
regulator_register_resolve_supply() and update the error exit path to
ensure the mutex is released on an error.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
---

Mark, please confirm if it is ok to move the call to release the mutex
before calling regulator_register_resolve_supply().

 drivers/regulator/core.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 74e8a7a3b3e8..2786d251b1cc 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -4000,12 +4000,11 @@ regulator_register(const struct regulator_desc *regulator_desc,
 	}
 
 	rdev_init_debugfs(rdev);
+	mutex_unlock(&regulator_list_mutex);
 
 	/* try to resolve regulators supply since a new one was registered */
 	class_for_each_device(&regulator_class, NULL, NULL,
 			      regulator_register_resolve_supply);
-out:
-	mutex_unlock(&regulator_list_mutex);
 	kfree(config);
 	return rdev;
 
@@ -4016,15 +4015,16 @@ scrub:
 	regulator_ena_gpio_free(rdev);
 	device_unregister(&rdev->dev);
 	/* device core frees rdev */
-	rdev = ERR_PTR(ret);
 	goto out;
 
 wash:
 	regulator_ena_gpio_free(rdev);
 clean:
 	kfree(rdev);
-	rdev = ERR_PTR(ret);
-	goto out;
+out:
+	mutex_unlock(&regulator_list_mutex);
+	kfree(config);
+	return ERR_PTR(ret);
 }
 EXPORT_SYMBOL_GPL(regulator_register);
 
-- 
2.1.4

[toc] | [next] | [standalone]

#1367336

[Multipart message — attachments visible in raw view] — view raw

On Wed, Mar 30, 2016 at 05:09:13PM +0100, Jon Hunter wrote:

>  INFO: task swapper/0:1 blocked for more than 120 seconds.
>  Not tainted 4.6.0-rc1-00001-g5e3ca2b-dirty #290
>  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>  swapper/0 D c07daeac 0 1 0 0x00000000
>  [<c07daeac>] (__schedule) from [<c07db454>] (schedule+0x50/0xc0)
>  [<c07db454>] (schedule) from [<c07db6b0>] (schedule_preempt_disabled+0x24/0x40)

Please don't paste entire backlogs into changelogs, they're *enormous*,
mostly noise and obscure any actual content that's in there through
denial of service.  If they're useful then include edited subsets that
highlight the relevant sections of the backtrace so your changelog is
more legible.

[toc] | [prev] | [next] | [standalone]

#1367419

On 30/03/16 17:18, Mark Brown wrote:
> * PGP Signed by an unknown key
> 
> On Wed, Mar 30, 2016 at 05:09:13PM +0100, Jon Hunter wrote:
> 
>>  INFO: task swapper/0:1 blocked for more than 120 seconds.
>>  Not tainted 4.6.0-rc1-00001-g5e3ca2b-dirty #290
>>  "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>>  swapper/0 D c07daeac 0 1 0 0x00000000
>>  [<c07daeac>] (__schedule) from [<c07db454>] (schedule+0x50/0xc0)
>>  [<c07db454>] (schedule) from [<c07db6b0>] (schedule_preempt_disabled+0x24/0x40)
> 
> Please don't paste entire backlogs into changelogs, they're *enormous*,
> mostly noise and obscure any actual content that's in there through
> denial of service.  If they're useful then include edited subsets that
> highlight the relevant sections of the backtrace so your changelog is
> more legible.

Ok, no problem. Are you happy with the patch otherwise? If so, do you want me to resend or do you wish to trim the backlog? I think that this part is interesting ...

INFO: task swapper/0:1 blocked for more than 120 seconds.
 Not tainted 4.6.0-rc1-00001-g5e3ca2b-dirty #290
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 swapper/0 D c07daeac 0 1 0 0x00000000
 [<c07daeac>] (__schedule) from [<c07db454>] (schedule+0x50/0xc0)
 [<c07db454>] (schedule) from [<c07db6b0>] (schedule_preempt_disabled+0x24/0x40)
 [<c07db6b0>] (schedule_preempt_disabled) from [<c07ddd48>] (__mutex_lock_slowpath+0x17c/0x3e4)
 [<c07ddd48>] (__mutex_lock_slowpath) from [<c07ddfbc>] (mutex_lock+0xc/0x24)
 [<c07ddfbc>] (mutex_lock) from [<c03ab5f0>] (regulator_dev_lookup+0x130/0x208)
 [<c03ab5f0>] (regulator_dev_lookup) from [<c03aedd0>] (regulator_resolve_supply+0x94/0x2bc)
 [<c03aedd0>] (regulator_resolve_supply) from [<c04364e4>] (class_for_each_device+0x54/0xa8)
 [<c04364e4>] (class_for_each_device) from [<c03ae0a4>] (regulator_register+0x8cc/0xd10)
 [<c03ae0a4>] (regulator_register) from [<c03b0000>] (devm_regulator_register+0x40/0x74)
 [<c03b0000>] (devm_regulator_register) from [<c03b2ef0>] (palmas_smps_registration+0x254/0x3fc)
 [<c03b2ef0>] (palmas_smps_registration) from [<c03b3400>] (palmas_regulators_probe+0x368/0x424)
 [<c03b3400>] (palmas_regulators_probe) from [<c0436b1c>] (platform_drv_probe+0x50/0xb0)
 ...

Jon

[toc] | [prev] | [next] | [standalone]

#1367459

[Multipart message — attachments visible in raw view] — view raw

On Wed, Mar 30, 2016 at 05:46:05PM +0100, Jon Hunter wrote:

Please fix your mail client to word wrap within paragraphs at something
substantially less than 80 columns.  Doing this makes your messages much
easier to read and reply to.

> > Please don't paste entire backlogs into changelogs, they're *enormous*,
> > mostly noise and obscure any actual content that's in there through
> > denial of service.  If they're useful then include edited subsets that
> > highlight the relevant sections of the backtrace so your changelog is
> > more legible.

> Ok, no problem. Are you happy with the patch otherwise? If so, do you
> want me to resend or do you wish to trim the backlog? I think that

I haven't reviwed it yet.

> this part is interesting ...

I'm really getting nothing at all from this, all it really does is point
to the call site but that's already much more clearly identified in the
changelog.  We certainly don't need to know which driver called this.

[toc] | [prev] | [next] | [standalone]

#1367494

On 30/03/16 18:00, Mark Brown wrote:
> * PGP Signed by an unknown key
> 
> On Wed, Mar 30, 2016 at 05:46:05PM +0100, Jon Hunter wrote:
> 
> Please fix your mail client to word wrap within paragraphs at something
> substantially less than 80 columns.  Doing this makes your messages much
> easier to read and reply to.
> 
>>> Please don't paste entire backlogs into changelogs, they're *enormous*,
>>> mostly noise and obscure any actual content that's in there through
>>> denial of service.  If they're useful then include edited subsets that
>>> highlight the relevant sections of the backtrace so your changelog is
>>> more legible.
> 
>> Ok, no problem. Are you happy with the patch otherwise? If so, do you
>> want me to resend or do you wish to trim the backlog? I think that
> 
> I haven't reviwed it yet.
> 
>> this part is interesting ...
> 
> I'm really getting nothing at all from this, all it really does is point
> to the call site but that's already much more clearly identified in the
> changelog.  We certainly don't need to know which driver called this.

Ok, fine with me. If you are happy with the actual change, feel free to
remove the backlog or I can re-send if you wish.

Jon

[toc] | [prev] | [next] | [standalone]

#1367666

Hello Jon,

On 03/30/2016 12:09 PM, Jon Hunter wrote:
> Commit 5e3ca2b349b1 ("regulator: Try to resolve regulators supplies on
> registration") added a call to regulator_resolve_supply() within
> regulator_register() where the regulator_list_mutex is held. This causes
> the following deadlock to occur on the Tegra114 Dalmore board when the
> palmas PMIC is registered because regulator_register_resolve_supply()
> calls regulator_dev_lookup() which may try to acquire the
> regulator_list_mutex again.
>

Sorry for missing that. I didn't notice because on my machine the regulators
are looked up using OF and in that case the regulator_list_mutex isn't grabbed.

I believe your patch is correct, I have just one trivial comment below:

>  
> @@ -4016,15 +4015,16 @@ scrub:
>  	regulator_ena_gpio_free(rdev);
>  	device_unregister(&rdev->dev);
>  	/* device core frees rdev */
> -	rdev = ERR_PTR(ret);
>  	goto out;
>  
>  wash:
>  	regulator_ena_gpio_free(rdev);
>  clean:
>  	kfree(rdev);
> -	rdev = ERR_PTR(ret);

You are doing some cleanup of the clean and scrub error paths by removing
rdev and returning ERR_PTR(ret) directly. I believe that should be in a
separate patch since is not related to the fix.

> -	goto out;
> +out:
> +	mutex_unlock(&regulator_list_mutex);
> +	kfree(config);
> +	return ERR_PTR(ret);
>  }
>  EXPORT_SYMBOL_GPL(regulator_register);
>  
> 

If you split the cleanup and address Mark's comments, feel free to add:

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

[toc] | [prev] | [next] | [standalone]

#1367667

Hello Mark,

On 03/30/2016 07:34 PM, Mark Brown wrote:
> On Wed, Mar 30, 2016 at 07:25:49PM -0400, Javier Martinez Canillas wrote:
> 
>> You are doing some cleanup of the clean and scrub error paths by removing
>> rdev and returning ERR_PTR(ret) directly. I believe that should be in a
>> separate patch since is not related to the fix.
> 
> There needs to be some reorganization due to the movement with the mutex
> handling.
> 

Yes, I know. My point was that besides the reorganization that is needed,
he is removing some variables and that seemed like a separate change to me.

But of course you are the maintainer so ignore my comment if you don't mind
about that.

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

[toc] | [prev] | [next] | [standalone]

#1367671

[Multipart message — attachments visible in raw view] — view raw

On Wed, Mar 30, 2016 at 07:25:49PM -0400, Javier Martinez Canillas wrote:

> You are doing some cleanup of the clean and scrub error paths by removing
> rdev and returning ERR_PTR(ret) directly. I believe that should be in a
> separate patch since is not related to the fix.

There needs to be some reorganization due to the movement with the mutex
handling.

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web