Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]

Groups > linux.kernel > #1416324 > unrolled thread

[PATCH v5] r8152: Add support for setting pass through MAC address on RTL8153-AD

Back to article view | Back to linux.kernel

Contents

  [PATCH v5] r8152: Add support for setting pass through MAC address on RTL8153-AD Mario Limonciello <mario_limonciello@dell.com> - 2016-06-07 17:40 +0200
    Re: [PATCH v5] r8152: Add support for setting pass through MAC  address on RTL8153-AD Pali Rohár <pali.rohar@gmail.com> - 2016-06-07 20:10 +0200

#1416324 — [PATCH v5] r8152: Add support for setting pass through MAC address on RTL8153-AD

The RTL8153-AD supports a persistent system specific MAC address.
This means a device plugged into two different systems with host side
support will show different (but persistent) MAC addresses.

This information for the system's persistent MAC address is burned in when
the system HW is built and available under \_SB.AMAC in the DSDT at runtime.

This technology is currently implemented in the Dell TB15 and WD15 Type-C
docks.  More information is available here:
http://www.dell.com/support/article/us/en/04/SLN301147

Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
---
Changes from v4:
 * Correct style for all of Pali's comments
 * Add extra check for trailing # in ACPI request
 * Correct logic test for invalid MAC address to cover hex2bin ret 0,
   but valid_is_ether being invalid

 drivers/net/usb/r8152.c | 77 +++++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 75 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 3f9f6ed..5a04c59 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -26,6 +26,7 @@
 #include <linux/mdio.h>
 #include <linux/usb/cdc.h>
 #include <linux/suspend.h>
+#include <linux/acpi.h>
 
 /* Information for net-next */
 #define NETNEXT_VERSION		"08"
@@ -455,6 +456,11 @@
 /* SRAM_IMPEDANCE */
 #define RX_DRIVING_MASK		0x6000
 
+/* MAC PASSTHRU */
+#define AD_MASK			0xfee0
+#define EFUSE			0xcfdb
+#define PASS_THRU_MASK		0x1
+
 enum rtl_register_content {
 	_1000bps	= 0x10,
 	_100bps		= 0x08,
@@ -1030,6 +1036,66 @@ out1:
 	return ret;
 }
 
+/* Devices containing RTL8153-AD can support a persistent
+ * host system provided MAC address.
+ * Examples of this are Dell TB15 and Dell WD15 docks
+ */
+static int vendor_mac_passthru_addr_read(struct r8152 *tp, struct sockaddr *sa)
+{
+	acpi_status status;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+	union acpi_object *obj;
+	int ret = -EINVAL;
+	u32 ocp_data;
+	unsigned char buf[6];
+
+	/* test for -AD variant of RTL8153 */
+	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+	if ((ocp_data & AD_MASK) != 0x1000)
+		return -ENODEV;
+
+	/* test for MAC address pass-through bit */
+	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
+	if ((ocp_data & PASS_THRU_MASK) != 1)
+		return -ENODEV;
+
+	/* returns _AUXMAC_#AABBCCDDEEFF# */
+	status = acpi_evaluate_object(NULL, "\\_SB.AMAC", NULL, &buffer);
+	obj = (union acpi_object *)buffer.pointer;
+	if (!ACPI_SUCCESS(status))
+		return -ENODEV;
+	if (obj->type != ACPI_TYPE_BUFFER || obj->string.length != 0x17) {
+		netif_warn(tp, probe, tp->netdev,
+			   "Invalid buffer when reading pass-thru MAC addr: "
+			   "(%d, %d)\n",
+			   obj->type, obj->string.length);
+		goto amacout;
+	}
+	if (strncmp(obj->string.pointer, "_AUXMAC_#", 9) != 0 ||
+	    strncmp(obj->string.pointer + 0x15, "#", 1) != 0) {
+		netif_warn(tp, probe, tp->netdev,
+			   "Invalid header when reading pass-thru MAC addr\n");
+		goto amacout;
+	}
+	ret = hex2bin(buf, obj->string.pointer + 9, 6);
+	if (!(ret == 0 && is_valid_ether_addr(buf))) {
+		netif_warn(tp, probe, tp->netdev,
+			   "Invalid MAC when reading pass-thru MAC addr: "
+			   "%pM\n",
+			   buf);
+		goto amacout;
+	}
+	memcpy(sa->sa_data, buf, 6);
+	ether_addr_copy(tp->netdev->dev_addr, sa->sa_data);
+	netif_info(tp, probe, tp->netdev,
+		   "Using pass-thru MAC addr %pM\n", sa->sa_data);
+	ret = 0;
+
+amacout:
+	kfree(obj);
+	return ret;
+}
+
 static int set_ethernet_addr(struct r8152 *tp)
 {
 	struct net_device *dev = tp->netdev;
@@ -1038,8 +1104,15 @@ static int set_ethernet_addr(struct r8152 *tp)
 
 	if (tp->version == RTL_VER_01)
 		ret = pla_ocp_read(tp, PLA_IDR, 8, sa.sa_data);
-	else
-		ret = pla_ocp_read(tp, PLA_BACKUP, 8, sa.sa_data);
+	else {
+		/* if this is not an RTL8153-AD, no eFuse mac pass thru set,
+		 * or system doesn't provide valid _SB.AMAC this will be
+		 * be expected to non-zero
+		 */
+		ret = vendor_mac_passthru_addr_read(tp, &sa);
+		if (ret < 0)
+			ret = pla_ocp_read(tp, PLA_BACKUP, 8, sa.sa_data);
+	}
 
 	if (ret < 0) {
 		netif_err(tp, probe, dev, "Get ether addr fail\n");
-- 
2.7.4

[toc] | [next] | [standalone]

#1416488 — Re: [PATCH v5] r8152: Add support for setting pass through MAC address on RTL8153-AD

Hi! Another problem which I found now:

On Tuesday 07 June 2016 10:33:47 Mario Limonciello wrote:
> +	ret = hex2bin(buf, obj->string.pointer + 9, 6);
> +	if (!(ret == 0 && is_valid_ether_addr(buf))) {
> +		netif_warn(tp, probe, tp->netdev,
> +			   "Invalid MAC when reading pass-thru MAC addr: "
> +			   "%pM\n",
> +			   buf);
> +		goto amacout;
> +	}

In case when hex2bin returns zero, but is_valid_ether_addr returns
false, this function returns also zero. And thats wrong, because error
occur.

-- 
Pali Rohár
pali.rohar@gmail.com

[toc] | [prev] | [standalone]

Back to top | Article view | linux.kernel

csiph-web