Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1278335 > unrolled thread
| Started by | Pavel Machek <pavel@ucw.cz> |
|---|---|
| First post | 2015-11-26 17:40 +0100 |
| Last post | 2015-11-28 16:00 +0100 |
| Articles | 7 — 4 participants |
Back to article view | Back to linux.kernel
4.3+: Atheros ethernet fails after resume from s2ram, due to order 4 allocation Pavel Machek <pavel@ucw.cz> - 2015-11-26 17:40 +0100
Re: 4.3+: Atheros ethernet fails after resume from s2ram, due to order 4 allocation Francois Romieu <romieu@fr.zoreil.com> - 2015-11-26 23:00 +0100
Re: 4.3+: Atheros ethernet fails after resume from s2ram, due to order 4 allocation Michal Hocko <mhocko@kernel.org> - 2015-11-27 09:30 +0100
[PATCH] Improve Atheros ethernet driver not to do order 4 GFP_ATOMIC allocation Pavel Machek <pavel@ucw.cz> - 2015-11-28 16:00 +0100
Re: [PATCH] Improve Atheros ethernet driver not to do order 4 GFP_ATOMIC allocation Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> - 2015-11-29 23:00 +0100
Re: [PATCH] Improve Atheros ethernet driver not to do order 4 GFP_ATOMIC allocation Michal Hocko <mhocko@kernel.org> - 2015-11-30 14:30 +0100
Re: 4.3+: Atheros ethernet fails after resume from s2ram, due to order 4 allocation Pavel Machek <pavel@ucw.cz> - 2015-11-28 16:00 +0100
| From | Pavel Machek <pavel@ucw.cz> |
|---|---|
| Date | 2015-11-26 17:40 +0100 |
| Subject | 4.3+: Atheros ethernet fails after resume from s2ram, due to order 4 allocation |
| Message-ID | <qz7Kq-7Fr-23@gated-at.bofh.it> |
Hi!
...and dmesg tells us what is going on:
[ 6961.550240] NetworkManager: page allocation failure: order:4,
mode:0x2080020
[ 6961.550249] CPU: 0 PID: 2590 Comm: NetworkManager Tainted: G
W 4.3.0+ #124
[ 6961.550250] Hardware name: Acer Aspire 5732Z/Aspire 5732Z, BIOS
V3.07 02/10/2010
[ 6961.550252] 00000000 00000000 f2ad1a04 c42ba5b8 00000000 f2ad1a2c
c40d650a c4d3ee1c
[ 6961.550260] f34ef600 00000004 02080020 c4eeef40 00000000 00000010
00000000 f2ad1ac8
[ 6961.550266] c40d8caa 02080020 00000004 00000000 00000070 f34ef200
00000060 00000010
[ 6961.550272] Call Trace:
...[ 6961.550299] [<c4006811>] dma_generic_alloc_coherent+0x71/0x120
[ 6961.550301] [<c40067a0>] ? via_no_dac+0x30/0x30
[ 6961.550307] [<c465b16e>] atl1c_open+0x29e/0x300
[ 6961.550313] [<c48b96f5>] ? call_netdevice_notifiers_info+0x25/0x50
[ 6961.550316] [<c48c081b>] __dev_open+0x7b/0xf0
[ 6961.550318] [<c48c0ac9>] __dev_change_flags+0x89/0x140
[ 6961.550320] [<c48c0ba3>] dev_change_flags+0x23/0x60
[ 6961.550325] [<c48ce416>] do_setlink+0x286/0x7b0
[ 6961.550328] [<c42ded02>] ? nla_parse+0x22/0xd0
[ 6961.550330] [<c48cf906>] rtnl_newlink+0x5d6/0x860
[ 6961.550336] [<c407f8a1>] ? __lock_acquire.isra.24+0x3a1/0xc80
[ 6961.550342] [<c4047ae2>] ? ns_capable+0x22/0x60
[ 6961.550345] [<c48e7c5d>] ? __netlink_ns_capable+0x2d/0x40
[ 6961.550351] [<c49c9c54>] ? xprt_transmit+0x94/0x220
[ 6961.550354] [<c48cd9e6>] rtnetlink_rcv_msg+0x76/0x1f0
[ 6961.550356] [<c48cd970>] ? rtnetlink_rcv+0x30/0x30
[ 6961.550359] [<c48eb35e>] netlink_rcv_skb+0x8e/0xb0
...
[ 6961.550412] Mem-Info:
[ 6961.550417] active_anon:30319 inactive_anon:25075 isolated_anon:0
active_file:327764 inactive_file:152179 isolated_file:16
unevictable:0 dirty:6 writeback:0 unstable:0
slab_reclaimable:149091 slab_unreclaimable:18973
mapped:18100 shmem:4847 pagetables:1538 bounce:0
free:57732 free_pcp:10 free_cma:0
...
[ 6961.550492] 485897 total pagecache pages
[ 6961.550494] 1086 pages in swap cache
[ 6961.550496] Swap cache stats: add 16738, delete 15652, find
6708/8500
[ 6961.550497] Free swap = 1656440kB
[ 6961.550498] Total swap = 1681428kB
[ 6961.550499] 785914 pages RAM
[ 6961.550500] 557663 pages HighMem/MovableOnly
[ 6961.550501] 12639 pages reserved
[ 6961.550506] atl1c 0000:05:00.0: pci_alloc_consistend failed
[ 6962.148358] psmouse serio1: synaptics: queried max coordinates: x
[..5772], y [..5086]
Order 4 allocation... probably doable during boot, but not really
suitable during resume.
I'm not sure how repeatable it is, but it definitely happened more
than once.
/*
* real ring DMA buffer
* each ring/block may need up to 8 bytes for alignment, hence the
* additional bytes tacked onto the end.
*/
ring_header->size = size =
sizeof(struct atl1c_tpd_desc) * tpd_ring->count * 2 +
sizeof(struct atl1c_rx_free_desc) * rx_desc_count +
sizeof(struct atl1c_recv_ret_status) * rx_desc_count +
8 * 4;
ring_header->desc = pci_alloc_consistent(pdev, ring_header->size,
&ring_header->dma);
if (unlikely(!ring_header->desc)) {
dev_err(&pdev->dev, "pci_alloc_consistend failed\n");
goto err_nomem;
}
(Note the typo in dev_err... at least it is easy to grep).
Ok, so what went on is easy.. any ideas how to fix it?
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [next] | [standalone]
| From | Francois Romieu <romieu@fr.zoreil.com> |
|---|---|
| Date | 2015-11-26 23:00 +0100 |
| Subject | Re: 4.3+: Atheros ethernet fails after resume from s2ram, due to order 4 allocation |
| Message-ID | <qzcK5-2kk-13@gated-at.bofh.it> |
| In reply to | #1278335 |
Pavel Machek <pavel@ucw.cz> : [...] > Ok, so what went on is easy.. any ideas how to fix it ? The driver should 1) prohibit holes in its receive ring, 2) allocate before pushing data up in the stack 3) drop packets when it can't allocate a fresh buffer and 4) stop releasing receive buffers - and any resource for that matter - during suspend. Really. -- Ueimor -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [next] | [standalone]
| From | Michal Hocko <mhocko@kernel.org> |
|---|---|
| Date | 2015-11-27 09:30 +0100 |
| Subject | Re: 4.3+: Atheros ethernet fails after resume from s2ram, due to order 4 allocation |
| Message-ID | <qzmzL-lM-1@gated-at.bofh.it> |
| In reply to | #1278335 |
On Thu 26-11-15 17:34:13, Pavel Machek wrote:
> Hi!
>
> ...and dmesg tells us what is going on:
>
> [ 6961.550240] NetworkManager: page allocation failure: order:4,
> mode:0x2080020
This is GFP_ATOMIC|___GFP_RECLAIMABLE high order request. So something
that the caller should tollerate to fail.
> [ 6961.550249] CPU: 0 PID: 2590 Comm: NetworkManager Tainted: G
> W 4.3.0+ #124
> [ 6961.550250] Hardware name: Acer Aspire 5732Z/Aspire 5732Z, BIOS
> V3.07 02/10/2010
> [ 6961.550252] 00000000 00000000 f2ad1a04 c42ba5b8 00000000 f2ad1a2c
> c40d650a c4d3ee1c
> [ 6961.550260] f34ef600 00000004 02080020 c4eeef40 00000000 00000010
> 00000000 f2ad1ac8
> [ 6961.550266] c40d8caa 02080020 00000004 00000000 00000070 f34ef200
> 00000060 00000010
> [ 6961.550272] Call Trace:
> ...[ 6961.550299] [<c4006811>] dma_generic_alloc_coherent+0x71/0x120
> [ 6961.550301] [<c40067a0>] ? via_no_dac+0x30/0x30
> [ 6961.550307] [<c465b16e>] atl1c_open+0x29e/0x300
> [ 6961.550313] [<c48b96f5>] ? call_netdevice_notifiers_info+0x25/0x50
> [ 6961.550316] [<c48c081b>] __dev_open+0x7b/0xf0
> [ 6961.550318] [<c48c0ac9>] __dev_change_flags+0x89/0x140
> [ 6961.550320] [<c48c0ba3>] dev_change_flags+0x23/0x60
> [ 6961.550325] [<c48ce416>] do_setlink+0x286/0x7b0
> [ 6961.550328] [<c42ded02>] ? nla_parse+0x22/0xd0
> [ 6961.550330] [<c48cf906>] rtnl_newlink+0x5d6/0x860
> [ 6961.550336] [<c407f8a1>] ? __lock_acquire.isra.24+0x3a1/0xc80
> [ 6961.550342] [<c4047ae2>] ? ns_capable+0x22/0x60
> [ 6961.550345] [<c48e7c5d>] ? __netlink_ns_capable+0x2d/0x40
> [ 6961.550351] [<c49c9c54>] ? xprt_transmit+0x94/0x220
> [ 6961.550354] [<c48cd9e6>] rtnetlink_rcv_msg+0x76/0x1f0
> [ 6961.550356] [<c48cd970>] ? rtnetlink_rcv+0x30/0x30
> [ 6961.550359] [<c48eb35e>] netlink_rcv_skb+0x8e/0xb0
> ...
> [ 6961.550412] Mem-Info:
> [ 6961.550417] active_anon:30319 inactive_anon:25075 isolated_anon:0
> active_file:327764 inactive_file:152179 isolated_file:16
> unevictable:0 dirty:6 writeback:0 unstable:0
> slab_reclaimable:149091 slab_unreclaimable:18973
> mapped:18100 shmem:4847 pagetables:1538 bounce:0
> free:57732 free_pcp:10 free_cma:0
> ...
> [ 6961.550492] 485897 total pagecache pages
> [ 6961.550494] 1086 pages in swap cache
> [ 6961.550496] Swap cache stats: add 16738, delete 15652, find
> 6708/8500
> [ 6961.550497] Free swap = 1656440kB
> [ 6961.550498] Total swap = 1681428kB
> [ 6961.550499] 785914 pages RAM
> [ 6961.550500] 557663 pages HighMem/MovableOnly
> [ 6961.550501] 12639 pages reserved
> [ 6961.550506] atl1c 0000:05:00.0: pci_alloc_consistend failed
> [ 6962.148358] psmouse serio1: synaptics: queried max coordinates: x
> [..5772], y [..5086]
>
> Order 4 allocation... probably doable during boot, but not really
> suitable during resume.
>
> I'm not sure how repeatable it is, but it definitely happened more
> than once.
>
> /*
> * real ring DMA buffer
> * each ring/block may need up to 8 bytes for alignment, hence the
> * additional bytes tacked onto the end.
> */
> ring_header->size = size =
> sizeof(struct atl1c_tpd_desc) * tpd_ring->count * 2 +
> sizeof(struct atl1c_rx_free_desc) * rx_desc_count +
> sizeof(struct atl1c_recv_ret_status) * rx_desc_count +
> 8 * 4;
>
> ring_header->desc = pci_alloc_consistent(pdev, ring_header->size,
> &ring_header->dma);
Why is pci_alloc_consistent doing an unconditional GFP_ATOMIC
allocation? atl1_setup_ring_resources already does GFP_KERNEL
allocation in the same function so this should be sleepable
context. I think we should either add pci_alloc_consistent_gfp if
there are no explicit reasons to not do so or you can workaround
that by opencoding it and using dma_alloc_coherent directly with
GFP_KERNEL|__GFP_REPEAT. This doesn't guarantee a success though
because this is > PAGE_ALLOC_COSTLY_ORDER but it would increase chances
considerably. Also a vmalloc fallback can be used then more safely.
> if (unlikely(!ring_header->desc)) {
> dev_err(&pdev->dev, "pci_alloc_consistend failed\n");
> goto err_nomem;
> }
>
> (Note the typo in dev_err... at least it is easy to grep).
>
> Ok, so what went on is easy.. any ideas how to fix it?
--
Michal Hocko
SUSE Labs
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [next] | [standalone]
| From | Pavel Machek <pavel@ucw.cz> |
|---|---|
| Date | 2015-11-28 16:00 +0100 |
| Subject | [PATCH] Improve Atheros ethernet driver not to do order 4 GFP_ATOMIC allocation |
| Message-ID | <qzP8K-1HY-11@gated-at.bofh.it> |
| In reply to | #1278608 |
atl1c driver is doing order-4 allocation with GFP_ATOMIC
priority. That often breaks networking after resume. Switch to
GFP_KERNEL. Still not ideal, but should be significantly better.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 2795d6d..afb71e0 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -1016,10 +1016,10 @@ static int atl1c_setup_ring_resources(struct atl1c_adapter *adapter)
sizeof(struct atl1c_recv_ret_status) * rx_desc_count +
8 * 4;
- ring_header->desc = pci_alloc_consistent(pdev, ring_header->size,
- &ring_header->dma);
+ ring_header->desc = dma_alloc_coherent(&pdev->dev, ring_header->size,
+ &ring_header->dma, GFP_KERNEL);
if (unlikely(!ring_header->desc)) {
- dev_err(&pdev->dev, "pci_alloc_consistend failed\n");
+ dev_err(&pdev->dev, "could not get memmory for DMA buffer\n");
goto err_nomem;
}
memset(ring_header->desc, 0, ring_header->size);
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [next] | [standalone]
| From | Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> |
|---|---|
| Date | 2015-11-29 23:00 +0100 |
| Subject | Re: [PATCH] Improve Atheros ethernet driver not to do order 4 GFP_ATOMIC allocation |
| Message-ID | <qAiaK-34T-7@gated-at.bofh.it> |
| In reply to | #1279150 |
Hello.
On 11/28/2015 5:51 PM, Pavel Machek wrote:
> atl1c driver is doing order-4 allocation with GFP_ATOMIC
> priority. That often breaks networking after resume. Switch to
> GFP_KERNEL. Still not ideal, but should be significantly better.
>
> Signed-off-by: Pavel Machek <pavel@ucw.cz>
>
> diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
> index 2795d6d..afb71e0 100644
> --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
> +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
> @@ -1016,10 +1016,10 @@ static int atl1c_setup_ring_resources(struct atl1c_adapter *adapter)
> sizeof(struct atl1c_recv_ret_status) * rx_desc_count +
> 8 * 4;
>
> - ring_header->desc = pci_alloc_consistent(pdev, ring_header->size,
> - &ring_header->dma);
> + ring_header->desc = dma_alloc_coherent(&pdev->dev, ring_header->size,
> + &ring_header->dma, GFP_KERNEL);
> if (unlikely(!ring_header->desc)) {
> - dev_err(&pdev->dev, "pci_alloc_consistend failed\n");
> + dev_err(&pdev->dev, "could not get memmory for DMA buffer\n");
s/memmory/memory/.
[...]
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [next] | [standalone]
| From | Michal Hocko <mhocko@kernel.org> |
|---|---|
| Date | 2015-11-30 14:30 +0100 |
| Subject | Re: [PATCH] Improve Atheros ethernet driver not to do order 4 GFP_ATOMIC allocation |
| Message-ID | <qAwGK-4aw-15@gated-at.bofh.it> |
| In reply to | #1279150 |
On Sat 28-11-15 15:51:13, Pavel Machek wrote:
>
> atl1c driver is doing order-4 allocation with GFP_ATOMIC
> priority. That often breaks networking after resume. Switch to
> GFP_KERNEL. Still not ideal, but should be significantly better.
It is not clear why GFP_KERNEL can replace GFP_ATOMIC safely neither
from the changelog nor from the patch context. It is correct here
because atl1c_setup_ring_resources is a sleepable context (otherwise
tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL) would be incorrect
already) but a short note wouldn't kill us, would it?
> Signed-off-by: Pavel Machek <pavel@ucw.cz>
Anyway
Reviewed-by: Michal Hocko <mhocko@suse.com>
>
> diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
> index 2795d6d..afb71e0 100644
> --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
> +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
> @@ -1016,10 +1016,10 @@ static int atl1c_setup_ring_resources(struct atl1c_adapter *adapter)
> sizeof(struct atl1c_recv_ret_status) * rx_desc_count +
> 8 * 4;
>
> - ring_header->desc = pci_alloc_consistent(pdev, ring_header->size,
> - &ring_header->dma);
> + ring_header->desc = dma_alloc_coherent(&pdev->dev, ring_header->size,
> + &ring_header->dma, GFP_KERNEL);
> if (unlikely(!ring_header->desc)) {
> - dev_err(&pdev->dev, "pci_alloc_consistend failed\n");
> + dev_err(&pdev->dev, "could not get memmory for DMA buffer\n");
> goto err_nomem;
> }
> memset(ring_header->desc, 0, ring_header->size);
>
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
Michal Hocko
SUSE Labs
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [next] | [standalone]
| From | Pavel Machek <pavel@ucw.cz> |
|---|---|
| Date | 2015-11-28 16:00 +0100 |
| Subject | Re: 4.3+: Atheros ethernet fails after resume from s2ram, due to order 4 allocation |
| Message-ID | <qzP8K-1HY-17@gated-at.bofh.it> |
| In reply to | #1278608 |
Hi! > > /* > > * real ring DMA buffer > > * each ring/block may need up to 8 bytes for alignment, hence the > > * additional bytes tacked onto the end. > > */ > > ring_header->size = size = > > sizeof(struct atl1c_tpd_desc) * tpd_ring->count * 2 + > > sizeof(struct atl1c_rx_free_desc) * rx_desc_count + > > sizeof(struct atl1c_recv_ret_status) * rx_desc_count + > > 8 * 4; > > > > ring_header->desc = pci_alloc_consistent(pdev, ring_header->size, > > &ring_header->dma); > > Why is pci_alloc_consistent doing an unconditional GFP_ATOMIC > allocation? atl1_setup_ring_resources already does GFP_KERNEL > allocation in the same function so this should be sleepable > context. I think we should either add pci_alloc_consistent_gfp if > there are no explicit reasons to not do so or you can workaround There's existing interface "dma_alloc_coherent" which can be used. I did not yet try with __GFP_REPEAT, but GFP_KERNEL should already be big improvement. Let me send a patch.. Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web