Groups | Search | Server Info | Keyboard shortcuts | Login | Register [http] [https] [nntp] [nntps]
Groups > linux.kernel > #1263154 > unrolled thread
| Started by | Alim Akhtar <alim.akhtar@samsung.com> |
|---|---|
| First post | 2015-11-05 13:00 +0100 |
| Last post | 2015-11-06 01:30 +0100 |
| Articles | 3 — 3 participants |
Back to article view | Back to linux.kernel
[PATCH v2 1/2] arm64: dts: exynos7: Add pmic s2mps15 device tree node Alim Akhtar <alim.akhtar@samsung.com> - 2015-11-05 13:00 +0100
Re: [PATCH v2 1/2] arm64: dts: exynos7: Add pmic s2mps15 device tree node Krzysztof Kozlowski <k.kozlowski@samsung.com> - 2015-11-06 01:00 +0100
Re: [PATCH v2 1/2] arm64: dts: exynos7: Add pmic s2mps15 device tree node Alim Akhtar <alim.akhtar@gmail.com> - 2015-11-06 01:30 +0100
| From | Alim Akhtar <alim.akhtar@samsung.com> |
|---|---|
| Date | 2015-11-05 13:00 +0100 |
| Subject | [PATCH v2 1/2] arm64: dts: exynos7: Add pmic s2mps15 device tree node |
| Message-ID | <qrrmW-69O-13@gated-at.bofh.it> |
This patch add pmic (s2mps15) node of espresso board,
which includes addition of regulators and pmic-clk sub-nodes.
This patch also adds {vmmc,vqmmc}-supply properties for mmc2 node.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
Changes since v1:
* Addressed Javier and Krzysztof review comments.
* Removed unused ldo/buck nodes.
* Removed always-on properties from ldo/buck to disable them
* Added a consumer of pmic supply (like mmc)
arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 280 +++++++++++++++++++++++
1 file changed, 280 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 5424cc450f72..f5a3da50ac57 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -11,6 +11,7 @@
/dts-v1/;
#include "exynos7.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Samsung Exynos7 Espresso board based on EXYNOS7";
@@ -52,6 +53,283 @@
status = "okay";
};
+&hsi2c_4 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <200000>;
+ status = "okay";
+
+ s2mps15_pmic@66 {
+ compatible = "samsung,s2mps15-pmic";
+ reg = <0x66>;
+ interrupts = <2 IRQ_TYPE_NONE>;
+ interrupt-parent = <&gpa0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_irq>;
+ wakeup-source;
+
+ s2mps15_osc: clocks {
+ compatible = "samsung,s2mps13-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps13_ap", "s2mps13_cp",
+ "s2mps13_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_ldo1";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "vqmmc-sdcard";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "vdd_ldo3";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "vdd_ldo4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1110000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "vdd_ldo5";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_ldo6";
+ regulator-min-microvolt = <2250000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "vdd_ldo7";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "vdd_ldo8";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "vdd_ldo9";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "vdd_ldo10";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "vdd_ldo12";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "vdd_ldo13";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "vdd_ldo14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3375000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "vmmc-sdcard";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3375000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "vdd_ldo18";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2275000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "vdd_ldo19";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3375000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "vdd_ldo21";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3375000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "vdd_ldo23";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2275000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "vdd_ldo25";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3375000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "vdd_ldo26";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1470000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "vdd_ldo27";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2275000>;
+ regulator-enable-ramp-delay = <125>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_atlas";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_buck5";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <12500>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "vdd_buck7";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "vdd_buck8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_buck9";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2100000>;
+ regulator-always-on;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_buck10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-ramp-delay = <25000>;
+ regulator-enable-ramp-delay = <250>;
+ };
+ };
+ };
+};
+
+&pinctrl_alive {
+ pmic_irq: pmic-irq {
+ samsung,pins = "gpa0-2";
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+};
+
&mmc_0 {
status = "okay";
num-slots = <1>;
@@ -80,5 +358,7 @@
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
bus-width = <4>;
+ vmmc-supply = <&ldo17_reg>;
+ vqmmc-supply = <&ldo2_reg>;
disable-wp;
};
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [next] | [standalone]
| From | Krzysztof Kozlowski <k.kozlowski@samsung.com> |
|---|---|
| Date | 2015-11-06 01:00 +0100 |
| Subject | Re: [PATCH v2 1/2] arm64: dts: exynos7: Add pmic s2mps15 device tree node |
| Message-ID | <qrCBI-5dP-3@gated-at.bofh.it> |
| In reply to | #1263154 |
On 05.11.2015 20:52, Alim Akhtar wrote:
> This patch add pmic (s2mps15) node of espresso board,
> which includes addition of regulators and pmic-clk sub-nodes.
My comment for fixing capital letters was ignored. Do you disagree with it?
>
> This patch also adds {vmmc,vqmmc}-supply properties for mmc2 node.
>
> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> Changes since v1:
> * Addressed Javier and Krzysztof review comments.
> * Removed unused ldo/buck nodes.
> * Removed always-on properties from ldo/buck to disable them
> * Added a consumer of pmic supply (like mmc)
>
> arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 280 +++++++++++++++++++++++
> 1 file changed, 280 insertions(+)
>
Rest looks good, so with the fix above:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [next] | [standalone]
| From | Alim Akhtar <alim.akhtar@gmail.com> |
|---|---|
| Date | 2015-11-06 01:30 +0100 |
| Message-ID | <qrD4K-5D3-3@gated-at.bofh.it> |
| In reply to | #1263643 |
On Fri, Nov 6, 2015 at 5:25 AM, Krzysztof Kozlowski
<k.kozlowski@samsung.com> wrote:
> On 05.11.2015 20:52, Alim Akhtar wrote:
>> This patch add pmic (s2mps15) node of espresso board,
>> which includes addition of regulators and pmic-clk sub-nodes.
>
> My comment for fixing capital letters was ignored. Do you disagree with it?
>
Ah! sorry about that, I missed that completely, will re-send.
Thanks!
>>
>> This patch also adds {vmmc,vqmmc}-supply properties for mmc2 node.
>>
>> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
>> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
>> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
>> ---
>> Changes since v1:
>> * Addressed Javier and Krzysztof review comments.
>> * Removed unused ldo/buck nodes.
>> * Removed always-on properties from ldo/buck to disable them
>> * Added a consumer of pmic supply (like mmc)
>>
>> arch/arm64/boot/dts/exynos/exynos7-espresso.dts | 280 +++++++++++++++++++++++
>> 1 file changed, 280 insertions(+)
>>
>
> Rest looks good, so with the fix above:
>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>
> Best regards,
> Krzysztof
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Regards,
Alim
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[toc] | [prev] | [standalone]
Back to top | Article view | linux.kernel
csiph-web